New project Mountain Mods Ascension
-
Very cool, let's see how it's turning out, lately I see a lot of pcrelic sponsors XD if they pay I want one too :troll:
-
Very cool, let's see how it's turning out, lately I see a lot of pcrelic sponsors XD if they pay I want one too :troll:
Haha we have a premium account with Pcrelic….. To be honest with you it's the second purchase I've made with them, but I can guarantee you, that in terms of liquid cooling advice and as a company they are the best for me.
Thank you very much Tecnho, I hope this October I have all the material I need and I can make a big breakthrough in the thread.
Best regards.
-
Damn man, stop with your mods because then I look at my case and I see nothing but a sad piece of plastic :alone:
-
Damn man, stop with your mods because then I look at my case and I see nothing but a sad piece of plastic :alone:
Haha Obione, I'm a compulsive junkie, and this whole Mod thing is going to destroy me XD. Don't listen to me too much, because if you do you're going to end up like me <:(.
Best regards.
-
This morning I received the NB-Blacksilent along with the grilles and more Fitting.I'll leave you a few pictures of everything that arrived.
!
!
!
!
!
!
!
!
!
Now I'm at work and can't entertain myself much, so I'll give a brief talk later.
Regards.
-
My God, it seems like you are a Noiseblocker distributor :ugly:
-
Mae mía, parece que seas un distribuidor de Noiseblocker :ugly:
He comprado la fabrica NB jajaja, mas quisiera ;D
Son una pasada estos NB, el color azul de las hélices es una pasada. Luego el cable de alimentación PWM viene enfundado de negro, esto no se si lo cambiaré. Me gustaría hacer los paneles de la caja desmontable, lo que haría sería conectar una línea de ventiladores a un conector de manera que desconecto el conector y quito el panel.
Como podéis ver en las imágenes, hay dos tipos de cajas diferentes de ventiladores. Bien resulta que donde los he comprado según página pone que son la Rev 3.0, pero vienen dos diferentes. A simple vista son iguales, pero no es así, unos consumen más que los otros. La Rev 3.0 tienen un Power Wat 4,8 y los otros NB tienen un Power Wat 2,64.
Otro factor que aún lo tengo parado, tengo que ver cómo lo hago si es que lo hago, es meterle iluminación a los Fan NB, en la ocasión que lo requiera, porque tener todo el rato iluminados con luz, molestaría para día a día.
Al final voy a tirar por el Aquaero6 que trae control PWM y 30Wat por canal. Estaba mirando la posibilidad de montar 2 Aquaero6 y poner uno de esclavo, pero no es posible con este con el "5" LT si es posible….. De esa manera me saldría más barato que comprar todos los PA2 necesarios.
Edito: Os tengo que contar que he recibido otro paquete pero hasta esta noche no podré abrirlo...... jajajjaaj ¿Qué será??'
Saludos.
-
I hope those NB's are not as good as the silent-X that I bought one day because they were wonderful, and that after three months they were broken.
Let's see what they brought you... -
I hope those NB are not as good as the silent-X that I bought in their day for being a marvel, and that after three months they were broken.
Let's see what they brought you….Don't scare me, I hope not because after the fortune they cost me….... :muerto: I hope that at least they processed an RMA for you.
For now I won't be able to show you the last order that arrived. I'm a bit busy due to lack of time, until the end I won't be able to keep updating.
Best regards.
-
Don't scare me, I hope not because after the fortune they cost me.......:dead: I hope that at least they processed Rma for them.
For the moment I won't be able to show you the last order that arrived. I'm a bit busy due to lack of time, until the end I won't be able to keep updating.
Best regards.
Wow, what material you're getting yourself............... :ugly::ugly: Of the highest quality.....
I'm still following, to see how this all ends. ;).
Best regards
-
Vaya material te estas agenciando…............ :ugly::ugly: De primerisima calidad.....
Sigo atento, a ver como termina todo esto. ;).
Un Saludo
Y que lo digas Jotole, entre la configuración de la caja y la R.L se me esta yendo de las manos.
Os dejo un pequeño avance, hasta mañana no podre subir todo lo que me llego de Pcrelic.
Me he decidido en adquirir los Backplates Coldzero Gtx Titan y el puente 3 Sli EVGA Horizontal.
Tenía dudas si comprar el Backplate o no, debido a la salida de las Nuevas AMD y me diera por cacharrear.
Imagen del Backplate Coldzero Gtx Titan claro negro; de estos he pedido 3 unidades para cada Gpu:
!
Sobre el puente, de momento voy aplicarle esta placa EVGA, hasta que me haga del dichoso puente SLI con Led:
!
Mañana actualizare con mas material.
Un saludo.
-
As I promised I bring much of the requested material on Pcrelic. They would be the following:
EK-RES X3 - Anticyclone
EK-RES X3 - TUBE 150 Cylinder shaped tank body, Ø60x104mm this one is on the way…..
EK-RES X3 - TOP
EK-D5 X-RES 100 CSQ - Acetal - Top with reservoir for D5 pump
Koolance LIQ-702 High performance coolant 700ml UV blue
Acrylic - Tube 12/10mm Clear - 50cm
Hardware Labs Black ICE GT Stealth 360 XFlow - Radiator 3x120mm
Hardware Labs Black ICE SR1 360 - Radiator 3x120mm
EK-D5 Dual TOP CSQ - Acetal
EK-D5 Dual X-RES Link CSQA small advance of all the material together:
The stand for the single top made by Pcrelic:
!
!
Koolance LIQ-702 UV blue coolant 700ml:
!
!
Hardware Labs Black ICE GT Stealth 360 XFlow radiator:
!
!
!
!
!
!
!
!
!
!Hardware Labs Black ICE SR1 360 radiator:
!
!
!
!
!
!
!
-
Here we have the Tops, bodies, and anticyclones EK:
Top EK-D5 X-RES 100 CSQ - Acetal - Top with pump reservoir D5
EK-D5 Dual TOP CSQ - Acetal
EK-D5 Dual X-RES Link CSQ
EK-RES X3 - TOP
EK-RES X3 - Anticyclone (LONG)
Finally, Acrylic - Tube 12/10mm Clear:
!
!
!
!
!
This is everything so far, if nothing happens next week I will have the Backplate and the EVGA Sli support.
Regards.
-
Aquí vamos haber Los top, cuerpos y anticiclón EK:
! Top EK-D5 X-RES 100 CSQ - Acetal - Top con depósito para bomba D5
!
!
!
!
!
!
!
!
! EK-D5 Dual TOP CSQ - Acetal
!
!
!
!
!
!
!
!
!
!
!
! EK-D5 Dual X-RES Link CSQ
!
!
!
!
!
! EK-RES X3 - TOP
!
!
!
! EK-RES X3 - Anticyclone (LONG)
!
!
!Por último Acrílico - Tubo 12/10mm Clear:
!
!
!
!
!Esto es todo hasta el momento, si no pasa nada para la semana que viene tendré los Backplate y el soporte Sli Evga.
Saludos.
:love::love::love: Vaya Material….......!!!
Deseando ver el montaje.........!!
-
:love::love::love: Vaya Material….......!!!
Deseando ver el montaje.........!!
The build is going to be delayed a bit, until I have the Aquaero6 which I suppose will be here soon XD, and I want to make some modifications to the case one of them you already know what it is, remove the support of hell :wall:
Saludos.
-
Hi, yesterday I received new acquisitions from Coldzero, in which I bought the Backplate and the 3-Sli bridge support.First of all the Backplate Titan.
!
!
!
!
!
!
!
!3-SLI EVGA bridge plate.
!
!
!That's all for now, I will update as new ideas come to me and I receive more material that something is on the way XD.
Regards.
-
I bring a small update bought at Pcrelic. If nothing happens by next week I would like to start assembling. I'm missing the EK-RES X3 - TUBE 150 Cylinder reservoir body to start shaping the tube, I'll have them by early next week. Another order from modDIY is also coming in which I bring material to make custom PC cables.
This is pending the arrival of the Aquaero6 at Pcrelic, for now I bring some components of it.
A preview of all the material together:
Frame for Aquaero 5 and 6 PRO in black anodized aluminum
Aquacomputer "high flow" G1/4" flow sensor for aquaero and poweradjust
Frame for Poweradjust 2 USB in black anodized aluminum
EK-HD Tube D.I.Y. Kit 10&12mm
SilverStone FF122B. Grille+Magnetic filter for 120mm fanAQUAERO6 frame in black aluminum:
!
!
Aquacomputer flow sensor or flow meter:
!
!
!
!
!
I love the finish of the Aquacomputer sensor, ideal for placing it on a high point to illustrate it in the case.
PA2 frame in black aluminum:
!
!
EK-HD Tube D.I.Y. Kit 10&12mm tool needed to shape our acrylic tubes:
!
!
!
!
Finally, the SilverStone FF122B filters:
!
!
!
!
!
!
These filters are designed to be placed in our case with the magnet without needing any screws. Besides filtering dust, the grille of the FF122 reduces the noise associated with the passage of air, but not of the fan when it's at 2000 RPM XD.
Best regards.
-
Vaya RL, you are going to take that Mountain….............:ugly:
I can't wait for you to start the assembly....!!
A hug Ruru........!!
-
Vaya RL, va a llevar esa Mountain….............:ugly:
Estoy deseando que empiezes el montaje....!!
Un Abrazo Ruru........!!
Buenas Jotole, estaba un poco harto de tener miles de piezas de R.L de diferentes marcas. Siempre apurando el cuarto de los despieces de pc para ir montando, y en este mod quiero hacerlo lo mejor posible.
Yo también tengo ganas de verlo montado jajaaj, pero le queda bastante, pero como dijo un buen sabio lo bueno se hace esperar XD.
Estoy siguiendo el mod de Manji, que ya nos ha comentado que estuvo hablando contigo para pedirte consejos sobre los componentes, como te quiere la gente por aquí :love::love:.
Estoy esperando que me entre algún que otro pedido que están en camino para liarme con la Mountain, seguramente que unas de las cosas primeras que me ponga hacer sera el cableado de la fuente e ventiladores.
Un abrazo.
-
At this pace you won't have to modify anything with so many pieces bought
Nothing, pure envy. Let's see when you start assembling :sisi:
