New project Mountain Mods Ascension

[Ruruloko]

@Jotole:

Vaya material te estas agenciando…............ :ugly::ugly: De primerisima calidad.....

Sigo atento, a ver como termina todo esto. ;).

Un Saludo

Y que lo digas Jotole, entre la configuración de la caja y la R.L se me esta yendo de las manos.

Os dejo un pequeño avance, hasta mañana no podre subir todo lo que me llego de Pcrelic.

Me he decidido en adquirir los Backplates Coldzero Gtx Titan y el puente 3 Sli EVGA Horizontal.

Tenía dudas si comprar el Backplate o no, debido a la salida de las Nuevas AMD y me diera por cacharrear.

Imagen del Backplate Coldzero Gtx Titan claro negro; de estos he pedido 3 unidades para cada Gpu:

!

Sobre el puente, de momento voy aplicarle esta placa EVGA, hasta que me haga del dichoso puente SLI con Led:

!

Mañana actualizare con mas material.

Un saludo.

[Ruruloko]

As I promised I bring much of the requested material on Pcrelic. They would be the following:

EK-RES X3 - Anticyclone
EK-RES X3 - TUBE 150 Cylinder shaped tank body, Ø60x104mm this one is on the way…..
EK-RES X3 - TOP
EK-D5 X-RES 100 CSQ - Acetal - Top with reservoir for D5 pump
Koolance LIQ-702 High performance coolant 700ml UV blue
Acrylic - Tube 12/10mm Clear - 50cm
Hardware Labs Black ICE GT Stealth 360 XFlow - Radiator 3x120mm
Hardware Labs Black ICE SR1 360 - Radiator 3x120mm
EK-D5 Dual TOP CSQ - Acetal
EK-D5 Dual X-RES Link CSQ

A small advance of all the material together:

The stand for the single top made by Pcrelic:

!
!

Koolance LIQ-702 UV blue coolant 700ml:

!
!

Hardware Labs Black ICE GT Stealth 360 XFlow radiator:

!
!
!
!
!
!
!
!
!
!

Hardware Labs Black ICE SR1 360 radiator:

!
!
!
!
!
!
!

[Ruruloko]

Here we have the Tops, bodies, and anticyclones EK:

Top EK-D5 X-RES 100 CSQ - Acetal - Top with pump reservoir D5









EK-D5 Dual TOP CSQ - Acetal











EK-D5 Dual X-RES Link CSQ





EK-RES X3 - TOP



EK-RES X3 - Anticyclone (LONG)

Finally, Acrylic - Tube 12/10mm Clear:

!
!
!
!
!

This is everything so far, if nothing happens next week I will have the Backplate and the EVGA Sli support.

Regards.

[Jotole]

@Ruruloko:

Aquí vamos haber Los top, cuerpos y anticiclón EK:

! Top EK-D5 X-RES 100 CSQ - Acetal - Top con depósito para bomba D5

!
!
!
!
!
!
!
!
! EK-D5 Dual TOP CSQ - Acetal
!
!
!
!
!
!
!
!
!
!
!
! EK-D5 Dual X-RES Link CSQ
!
!
!
!
!
! EK-RES X3 - TOP
!
!
!
! EK-RES X3 - Anticyclone (LONG)
!
!
!

Por último Acrílico - Tubo 12/10mm Clear:

!
!
!
!
!

Esto es todo hasta el momento, si no pasa nada para la semana que viene tendré los Backplate y el soporte Sli Evga.

Saludos.

:love::love::love: Vaya Material….......!!!

Deseando ver el montaje.........!!

[Ruruloko]

@Jotole:

:love::love::love: Vaya Material….......!!!

Deseando ver el montaje.........!!

The build is going to be delayed a bit, until I have the Aquaero6 which I suppose will be here soon XD, and I want to make some modifications to the case one of them you already know what it is, remove the support of hell :wall:

Saludos.

[Ruruloko]

Hi, yesterday I received new acquisitions from Coldzero, in which I bought the Backplate and the 3-Sli bridge support.

First of all the Backplate Titan.

!
!
!
!
!
!
!
!

3-SLI EVGA bridge plate.

!
!
!

That's all for now, I will update as new ideas come to me and I receive more material that something is on the way XD.

Regards.

[Ruruloko]

I bring a small update bought at Pcrelic. If nothing happens by next week I would like to start assembling. I'm missing the EK-RES X3 - TUBE 150 Cylinder reservoir body to start shaping the tube, I'll have them by early next week. Another order from modDIY is also coming in which I bring material to make custom PC cables.

This is pending the arrival of the Aquaero6 at Pcrelic, for now I bring some components of it.

A preview of all the material together:

Frame for Aquaero 5 and 6 PRO in black anodized aluminum
Aquacomputer "high flow" G1/4" flow sensor for aquaero and poweradjust
Frame for Poweradjust 2 USB in black anodized aluminum
EK-HD Tube D.I.Y. Kit 10&12mm
SilverStone FF122B. Grille+Magnetic filter for 120mm fan

AQUAERO6 frame in black aluminum:

!
!

Aquacomputer flow sensor or flow meter:

!
!
!
!
!

I love the finish of the Aquacomputer sensor, ideal for placing it on a high point to illustrate it in the case.

PA2 frame in black aluminum:

!
!

EK-HD Tube D.I.Y. Kit 10&12mm tool needed to shape our acrylic tubes:

!
!
!
!

Finally, the SilverStone FF122B filters:

!
!
!
!
!
!

These filters are designed to be placed in our case with the magnet without needing any screws. Besides filtering dust, the grille of the FF122 reduces the noise associated with the passage of air, but not of the fan when it's at 2000 RPM XD.

Best regards.

[Jotole]

Vaya RL, you are going to take that Mountain….............:ugly:

I can't wait for you to start the assembly....!!

A hug Ruru........!!

[Ruruloko]

@Jotole:

Vaya RL, va a llevar esa Mountain….............:ugly:

Estoy deseando que empiezes el montaje....!!

Un Abrazo Ruru........!!

Buenas Jotole, estaba un poco harto de tener miles de piezas de R.L de diferentes marcas. Siempre apurando el cuarto de los despieces de pc para ir montando, y en este mod quiero hacerlo lo mejor posible.

Yo también tengo ganas de verlo montado jajaaj, pero le queda bastante, pero como dijo un buen sabio lo bueno se hace esperar XD.

Estoy siguiendo el mod de Manji, que ya nos ha comentado que estuvo hablando contigo para pedirte consejos sobre los componentes, como te quiere la gente por aquí :love::love:.

Estoy esperando que me entre algún que otro pedido que están en camino para liarme con la Mountain, seguramente que unas de las cosas primeras que me ponga hacer sera el cableado de la fuente e ventiladores.

Un abrazo.

[krampak]

At this pace you won't have to modify anything with so many pieces bought

Nothing, pure envy. Let's see when you start assembling :sisi:

[Ruruloko]

@krampak:

At this rate you won't have to modify anything with so many pieces bought

Nothing, pure envy. Let's see when you start with the assembly :sisi:

I think that if I'm going to have to modify or invent to fit everything I've bought, because I doubt that everything will fit ;D.

Thanks krampak, all your comments are appreciated.

Best regards.

[majo]

I have already bought 3 boxes at mountain mods, they are sent by FedEx and you have to go through customs if you want more information tell me. They are big but it fits from todo.Si I advise you that according to the model buy to mount the plate horizontally and not vertically. It is much more comfortable by far.
This was my second to last box when I was assembling it but I didn't have it finished, so you can see what can fit inside:

[Ruruloko]

@majo:

Ruruloko I have already bought 3 boxes at mountain mods, they send them by FedEx and you have to go through customs if you want more information tell me. They are big but it fits from todo.Si I recommend that depending on the model buy to mount the plate horizontally and not vertically. It is much more comfortable by far.
This was my second to last box when I was assembling it but I didn't have it finished, so you can see what can fit:

Hello majo.

You don't know how many times I went around to find someone who had this type of boxes to advise me with the….. and here you are :facepalm:.
I was talking to Jotole about it, he had a replica of the mountain. With him we agreed on several things about this box, but it is true that when I bought it on the page, I would have liked to clarify with someone who had already bought there some details, mostly because as you say between taxes and shipping you leave a lot of money and I wanted to be sure of what I was buying.

You are a machine majo every day you surprise me more with your acquisitions, is that the pinnacle???
They are amazing boxes, I currently have the Nox Project x2 which is a large tower and I was undecided if I should get the Corasair 900D which is another large tower but with many more configurations for the R.L which is what matters most to me for the project I have on hand.
I want to fill this mountain with radiators and at the same time with fans to try to get the best result in terms of temps on the components.

For now I don't want to mess with it until I have all the materials at home, so I have it a bit stopped but don't worry that if I have any doubts I already know where to turn XD.

Best regards, and thank you very much.

[Ruruloko]

Today I have collected a small order from Pcrelic, which includes more Silverstone FF12B filters, additives for the coolant and EK-RES X3 150 cylindrical reservoirs.

I have to inform you that the coolant I purchased from Koolance LIQ-702 UV blue has not been working with the black LED light. Maybe with a UV neon light it would work, but as I told you, it doesn't work with the LED. I bought additives to test from the brand Mayhems in light blue and dark blue, both in UV, and these do have a positive effect with the black light. In summary, I am going to use distilled water with the Mayhems additive.

I am waiting for another order from modDIY, which includes everything I need for sleeving and general wiring of the PC, but it turns out that I placed the order on the 15th of this month and I still haven't heard anything. What's strange is that on the third day it said it was shipped, and I chose fast shipping, but I haven't heard anything about it so far. Tonight I will send them an email to see what's going on. Has anyone who has bought here had any issues???

A small advance of today's material:

Mayhems additives and their corresponding distilled water:

!
!

EK-RES X3 - TUBE 150 acrylic cylindrical reservoirs, Ø60x104mm:

!
!
!
!
!
!
!
!
!

I have ordered the reservoir bodies to be 104mm high because I am going to place them on top of the tops and under the motherboard. On the top of the reservoir, I will put a fitting that will communicate with another one on the central plate or board, to achieve a cable pass between the two habits. And it will also serve as a support for the central plate of the motherboard.

Regards.

[Ruruloko]

Today I received the Sli EVGA bridge. I am waiting for several orders from various sites, including one from Pcrelic with the Aquaero6 which I have been informed I will have soon in my hands.
I have not yet received the Moddiy material, but I do not think it will take long to arrive and some other things I have ordered from Highflow.

First of all I am going to show you the bridge that comes with our motherboards, which does not have any kind of plate or sticker.

It would be this:

!

This would be the bridge housed with the Titans:

!

Finally the charm of the bridge is the lighting it brings:

!
!

Best regards.

[Ruruloko]

Edited…..

[niya]

¡Esta publicación está eliminada!

[Ruruloko]

This post is being processed/translated. The original version will be shown:

Este medio día me ha dado tiempo a sacarle algunas fotos a el pedido de Moddiy. No he querido abrir todo el embalaje, por falta de tiempo y a la vez no quería sacar todo de su bolsa, así que las imágenes no son del todo buenas, pero bueno eso es lo de menos ya lo veremos enfundados…... continuara XD.
Al ver que todo me ha llegado bien, he vuelto hacer otro pedido con mas material.

Pedido de Moddiy
180 x ATX / PCI / EPS pines del conector (hembra)
1 x modDIY ATX de 24 pines hembra conector Caja (Negro)
6 x modDIY Mujer 4-Pin PWM Fan Conector (Molex # 2510) con los contactos
11 x modDIY Mujer 3-Pin Conector del ventilador (Molex # 2510) con los contactos
4 x modDIY Mujer 2-Pin Conector del ventilador (Molex # 2510) con los contactos
4 x modDIY macho de 4 pines del conector de extensión del ventilador (Molex # 2510) con los contactos
12 x Ventilador blindados Molex Pins (Male)
60 x Ventilador blindados Molex pines (hembra)
9 x modDIY estándar de 4 pines conector hembra (Negro) con los contactos
40 x estándar Molex pines (hembra)
1 x Sunbeam universal Molex Pin Remover (sistema completo)
3 x SATA Conector - Negro
2 x 8-Pin Motherboard Conector hembra w / Pins - Negro
3 x 8 pines PCI-Express de alimentación Conector hembra w / Pins - Negro
3 x 6 +2- pin PCI-Express de alimentación Conector hembra w / Pins - Negro
2 x 4-Pin Motherboard Potencia Conector Hembra - Negro
20 x bañados en oro SATA pines
4 x 5-Pin SATA Connector w / Pins - Negro
5 x estándar Conector macho de 4 pines con Pins - Negro
170 x Deluxe Tejido Negro manga Cable de alta densidad (3mm)
30 x Deluxe Tejido Negro Cable de manga de alta densidad (4mm)
20 x Deluxe Tejido Negro manga Cable de alta densidad (6mm)
10 x Deluxe Tejido Negro Cable de manga de alta densidad (10 mm)
170 x Deluxe armadura azul manga Cable de alta densidad (3mm)
30 x Deluxe armadura azul Cable de manga de alta densidad (4mm)
20 x Deluxe armadura azul manga Cable de alta densidad (6mm)
10 x Deluxe armadura azul Cable de manga de alta densidad (10 mm)
20 x estándar Molex Pins (Male)
10 x Negro Alambre silla recorte Cable Clamp - Negro (3,2 mm CC-0)
10 x Negro Alambre silla recorte Cable Clamp - Negro (6,4 mm CC-1)
10 x Negro Alambre silla recorte Cable Clamp - Negro (9,5 mm CC-2)
20 x autoadhesivo Tie Mount - Negro
104 x antivibraciones Negro Rubber Grommet (M3)
4 x 2.54mm Dupont pines del conector (macho)
4 x 2.54mm Dupont pines del conector (hembra)
2 x Negro Carbon Fibre engomada 3D del vinilo de Matt seco con textura
4 x Serial ATA SATA Data Cable para DIY
1 x Enermax MaxRevo Series modulares (sistema completo 14pcs)
1 x 3M 9080HL Cintas adhesivas doble cara (1,5 mm)
1 x 3M Adhesive Tape Imán Flexible (10mm)

En primer lugar las clavijas para mi fuente Enermax Revolution 1500W, de manera que voy a dejar todos los cables originales de la fuente tal y como están y are cada uno a medida.

!
!
!

Enfundado de nuestros cables "Sleeving" Deluxe. El color elegido a sido el azul y negro. De momento no lo tengo del todo claro como are la colocación de las fundas, peo casi seguro que los mezclare entre ellos.

!
!
!
!
!
!
!
!
!
!
!
!
!
!

Aquí vamos a poder ver el adhesivo de doble cara, pegatina de fibra de carbono negra por si es necesario dar algún toque extra a la caja y los pilla cables para la colocación de ellos.

!
!
!
!
!

Bien llegado a este punto os voy a enseñar casi todo lo de mas, dijo todo lo de mas por que no le he podido echar fotos a todo y como ami me gustaría.
Sería las clavijas de alimentación, tanto psu-pcb-gpu-molex-sata ect….. con sus correspondientes punteras macho y hembras.

!
!
!
!
!
!
!
! Kit de herramientas para el sleeving:

!
!
!
!
!
!
!
!
! Estas juntas tóricas las voy a colocar entre en fan y la tapa de la caja, para que me cree una mini cámara de aire para iluminar los fan con led.

!

Esto es todo de momento, seguiré actualizando.

Saludos.

[diout]

¡Esta publicación está eliminada!

[majo]

That box is from when I had a second PC that I no longer have. The one I have as the first one has the motherboard horizontal, with 2 Phobya Extreme 1080 radiators with a beastly performance with 9 fans each. I have them in the front like a sandwich. If you get it, I recommend the one I have now, motherboard horizontal, even better temperatures, better arrangement to mount two PSUs like I have now and better dissipation since the heat goes up and when you put it horizontal you favor the exit of heat towards the top. Besides, you make it much easier to purge the air from the RL since instead of having the outlets horizontal, you have them vertical. The motherboard also suffers much less with the graphics in a vertical position, you don't apply stress to the PCI slots downwards due to the weight of the graphics, it's all advantages. Besides, in the lower part of the motherboard you can mount hard drives or whatever you want freely