New project Mountain Mods Ascension
-
Mae mía, parece que seas un distribuidor de Noiseblocker :ugly:
He comprado la fabrica NB jajaja, mas quisiera ;D
Son una pasada estos NB, el color azul de las hélices es una pasada. Luego el cable de alimentación PWM viene enfundado de negro, esto no se si lo cambiaré. Me gustaría hacer los paneles de la caja desmontable, lo que haría sería conectar una línea de ventiladores a un conector de manera que desconecto el conector y quito el panel.
Como podéis ver en las imágenes, hay dos tipos de cajas diferentes de ventiladores. Bien resulta que donde los he comprado según página pone que son la Rev 3.0, pero vienen dos diferentes. A simple vista son iguales, pero no es así, unos consumen más que los otros. La Rev 3.0 tienen un Power Wat 4,8 y los otros NB tienen un Power Wat 2,64.
Otro factor que aún lo tengo parado, tengo que ver cómo lo hago si es que lo hago, es meterle iluminación a los Fan NB, en la ocasión que lo requiera, porque tener todo el rato iluminados con luz, molestaría para día a día.
Al final voy a tirar por el Aquaero6 que trae control PWM y 30Wat por canal. Estaba mirando la posibilidad de montar 2 Aquaero6 y poner uno de esclavo, pero no es posible con este con el "5" LT si es posible….. De esa manera me saldría más barato que comprar todos los PA2 necesarios.
Edito: Os tengo que contar que he recibido otro paquete pero hasta esta noche no podré abrirlo...... jajajjaaj ¿Qué será??'
Saludos.
-
I hope those NB's are not as good as the silent-X that I bought one day because they were wonderful, and that after three months they were broken.
Let's see what they brought you... -
I hope those NB are not as good as the silent-X that I bought in their day for being a marvel, and that after three months they were broken.
Let's see what they brought you….Don't scare me, I hope not because after the fortune they cost me….... :muerto: I hope that at least they processed an RMA for you.
For now I won't be able to show you the last order that arrived. I'm a bit busy due to lack of time, until the end I won't be able to keep updating.
Best regards.
-
Don't scare me, I hope not because after the fortune they cost me.......:dead: I hope that at least they processed Rma for them.
For the moment I won't be able to show you the last order that arrived. I'm a bit busy due to lack of time, until the end I won't be able to keep updating.
Best regards.
Wow, what material you're getting yourself............... :ugly::ugly: Of the highest quality.....
I'm still following, to see how this all ends. ;).
Best regards
-
Vaya material te estas agenciando…............ :ugly::ugly: De primerisima calidad.....
Sigo atento, a ver como termina todo esto. ;).
Un Saludo
Y que lo digas Jotole, entre la configuración de la caja y la R.L se me esta yendo de las manos.
Os dejo un pequeño avance, hasta mañana no podre subir todo lo que me llego de Pcrelic.
Me he decidido en adquirir los Backplates Coldzero Gtx Titan y el puente 3 Sli EVGA Horizontal.
Tenía dudas si comprar el Backplate o no, debido a la salida de las Nuevas AMD y me diera por cacharrear.
Imagen del Backplate Coldzero Gtx Titan claro negro; de estos he pedido 3 unidades para cada Gpu:
!
Sobre el puente, de momento voy aplicarle esta placa EVGA, hasta que me haga del dichoso puente SLI con Led:
!
Mañana actualizare con mas material.
Un saludo.
-
As I promised I bring much of the requested material on Pcrelic. They would be the following:
EK-RES X3 - Anticyclone
EK-RES X3 - TUBE 150 Cylinder shaped tank body, Ø60x104mm this one is on the way…..
EK-RES X3 - TOP
EK-D5 X-RES 100 CSQ - Acetal - Top with reservoir for D5 pump
Koolance LIQ-702 High performance coolant 700ml UV blue
Acrylic - Tube 12/10mm Clear - 50cm
Hardware Labs Black ICE GT Stealth 360 XFlow - Radiator 3x120mm
Hardware Labs Black ICE SR1 360 - Radiator 3x120mm
EK-D5 Dual TOP CSQ - Acetal
EK-D5 Dual X-RES Link CSQA small advance of all the material together:
The stand for the single top made by Pcrelic:
!
!
Koolance LIQ-702 UV blue coolant 700ml:
!
!
Hardware Labs Black ICE GT Stealth 360 XFlow radiator:
!
!
!
!
!
!
!
!
!
!Hardware Labs Black ICE SR1 360 radiator:
!
!
!
!
!
!
!
-
Here we have the Tops, bodies, and anticyclones EK:
Top EK-D5 X-RES 100 CSQ - Acetal - Top with pump reservoir D5
EK-D5 Dual TOP CSQ - Acetal
EK-D5 Dual X-RES Link CSQ
EK-RES X3 - TOP
EK-RES X3 - Anticyclone (LONG)
Finally, Acrylic - Tube 12/10mm Clear:
!
!
!
!
!
This is everything so far, if nothing happens next week I will have the Backplate and the EVGA Sli support.
Regards.
-
Aquí vamos haber Los top, cuerpos y anticiclón EK:
! Top EK-D5 X-RES 100 CSQ - Acetal - Top con depósito para bomba D5
!
!
!
!
!
!
!
!
! EK-D5 Dual TOP CSQ - Acetal
!
!
!
!
!
!
!
!
!
!
!
! EK-D5 Dual X-RES Link CSQ
!
!
!
!
!
! EK-RES X3 - TOP
!
!
!
! EK-RES X3 - Anticyclone (LONG)
!
!
!Por último Acrílico - Tubo 12/10mm Clear:
!
!
!
!
!Esto es todo hasta el momento, si no pasa nada para la semana que viene tendré los Backplate y el soporte Sli Evga.
Saludos.
:love::love::love: Vaya Material….......!!!
Deseando ver el montaje.........!!
-
:love::love::love: Vaya Material….......!!!
Deseando ver el montaje.........!!
The build is going to be delayed a bit, until I have the Aquaero6 which I suppose will be here soon XD, and I want to make some modifications to the case one of them you already know what it is, remove the support of hell :wall:
Saludos.
-
Hi, yesterday I received new acquisitions from Coldzero, in which I bought the Backplate and the 3-Sli bridge support.First of all the Backplate Titan.
!
!
!
!
!
!
!
!3-SLI EVGA bridge plate.
!
!
!That's all for now, I will update as new ideas come to me and I receive more material that something is on the way XD.
Regards.
-
I bring a small update bought at Pcrelic. If nothing happens by next week I would like to start assembling. I'm missing the EK-RES X3 - TUBE 150 Cylinder reservoir body to start shaping the tube, I'll have them by early next week. Another order from modDIY is also coming in which I bring material to make custom PC cables.
This is pending the arrival of the Aquaero6 at Pcrelic, for now I bring some components of it.
A preview of all the material together:
Frame for Aquaero 5 and 6 PRO in black anodized aluminum
Aquacomputer "high flow" G1/4" flow sensor for aquaero and poweradjust
Frame for Poweradjust 2 USB in black anodized aluminum
EK-HD Tube D.I.Y. Kit 10&12mm
SilverStone FF122B. Grille+Magnetic filter for 120mm fanAQUAERO6 frame in black aluminum:
!
!
Aquacomputer flow sensor or flow meter:
!
!
!
!
!
I love the finish of the Aquacomputer sensor, ideal for placing it on a high point to illustrate it in the case.
PA2 frame in black aluminum:
!
!
EK-HD Tube D.I.Y. Kit 10&12mm tool needed to shape our acrylic tubes:
!
!
!
!
Finally, the SilverStone FF122B filters:
!
!
!
!
!
!
These filters are designed to be placed in our case with the magnet without needing any screws. Besides filtering dust, the grille of the FF122 reduces the noise associated with the passage of air, but not of the fan when it's at 2000 RPM XD.
Best regards.
-
Vaya RL, you are going to take that Mountain….............:ugly:
I can't wait for you to start the assembly....!!
A hug Ruru........!!
-
Vaya RL, va a llevar esa Mountain….............:ugly:
Estoy deseando que empiezes el montaje....!!
Un Abrazo Ruru........!!
Buenas Jotole, estaba un poco harto de tener miles de piezas de R.L de diferentes marcas. Siempre apurando el cuarto de los despieces de pc para ir montando, y en este mod quiero hacerlo lo mejor posible.
Yo también tengo ganas de verlo montado jajaaj, pero le queda bastante, pero como dijo un buen sabio lo bueno se hace esperar XD.
Estoy siguiendo el mod de Manji, que ya nos ha comentado que estuvo hablando contigo para pedirte consejos sobre los componentes, como te quiere la gente por aquí :love::love:.
Estoy esperando que me entre algún que otro pedido que están en camino para liarme con la Mountain, seguramente que unas de las cosas primeras que me ponga hacer sera el cableado de la fuente e ventiladores.
Un abrazo.
-
At this pace you won't have to modify anything with so many pieces bought
Nothing, pure envy. Let's see when you start assembling :sisi:
-
At this rate you won't have to modify anything with so many pieces bought
Nothing, pure envy. Let's see when you start with the assembly :sisi:
I think that if I'm going to have to modify or invent to fit everything I've bought, because I doubt that everything will fit ;D.
Thanks krampak, all your comments are appreciated.
Best regards.
-
I have already bought 3 boxes at mountain mods, they are sent by FedEx and you have to go through customs if you want more information tell me. They are big but it fits from todo.Si I advise you that according to the model buy to mount the plate horizontally and not vertically. It is much more comfortable by far.
This was my second to last box when I was assembling it but I didn't have it finished, so you can see what can fit inside:
-
Ruruloko I have already bought 3 boxes at mountain mods, they send them by FedEx and you have to go through customs if you want more information tell me. They are big but it fits from todo.Si I recommend that depending on the model buy to mount the plate horizontally and not vertically. It is much more comfortable by far.
This was my second to last box when I was assembling it but I didn't have it finished, so you can see what can fit:Hello majo.
You don't know how many times I went around to find someone who had this type of boxes to advise me with the….. and here you are :facepalm:.
I was talking to Jotole about it, he had a replica of the mountain. With him we agreed on several things about this box, but it is true that when I bought it on the page, I would have liked to clarify with someone who had already bought there some details, mostly because as you say between taxes and shipping you leave a lot of money and I wanted to be sure of what I was buying.You are a machine majo every day you surprise me more with your acquisitions, is that the pinnacle???
They are amazing boxes, I currently have the Nox Project x2 which is a large tower and I was undecided if I should get the Corasair 900D which is another large tower but with many more configurations for the R.L which is what matters most to me for the project I have on hand.
I want to fill this mountain with radiators and at the same time with fans to try to get the best result in terms of temps on the components.For now I don't want to mess with it until I have all the materials at home, so I have it a bit stopped but don't worry that if I have any doubts I already know where to turn XD.
Best regards, and thank you very much.
-
Today I have collected a small order from Pcrelic, which includes more Silverstone FF12B filters, additives for the coolant and EK-RES X3 150 cylindrical reservoirs.
I have to inform you that the coolant I purchased from Koolance LIQ-702 UV blue has not been working with the black LED light. Maybe with a UV neon light it would work, but as I told you, it doesn't work with the LED. I bought additives to test from the brand Mayhems in light blue and dark blue, both in UV, and these do have a positive effect with the black light. In summary, I am going to use distilled water with the Mayhems additive.
I am waiting for another order from modDIY, which includes everything I need for sleeving and general wiring of the PC, but it turns out that I placed the order on the 15th of this month and I still haven't heard anything. What's strange is that on the third day it said it was shipped, and I chose fast shipping, but I haven't heard anything about it so far. Tonight I will send them an email to see what's going on. Has anyone who has bought here had any issues???
A small advance of today's material:
Mayhems additives and their corresponding distilled water:
!
!
EK-RES X3 - TUBE 150 acrylic cylindrical reservoirs, Ø60x104mm:
!
!
!
!
!
!
!
!
!
I have ordered the reservoir bodies to be 104mm high because I am going to place them on top of the tops and under the motherboard. On the top of the reservoir, I will put a fitting that will communicate with another one on the central plate or board, to achieve a cable pass between the two habits. And it will also serve as a support for the central plate of the motherboard.
Regards.
-
Today I received the Sli EVGA bridge. I am waiting for several orders from various sites, including one from Pcrelic with the Aquaero6 which I have been informed I will have soon in my hands.
I have not yet received the Moddiy material, but I do not think it will take long to arrive and some other things I have ordered from Highflow.First of all I am going to show you the bridge that comes with our motherboards, which does not have any kind of plate or sticker.
It would be this:
!
This would be the bridge housed with the Titans:
!
Finally the charm of the bridge is the lighting it brings:
!
!
Best regards.
-
Edited…..
