New PC and already desperate.

[Fassou]

Probably, the installer does not recognize the device.

Visit the Sapphire website and download the latest version for your card, or try forcing the AMD generic by manually applying the driver for a similar model (also 7950).

Salu2!

[fjavi]

@Deferro:

Hello everyone.
After a few years without appearing on the forum (personal odysseys) I turn to all of you again and ask for help as I am a bit desperate.
I decided to build a new pc. It is as follows:

Equipment:
PB GA-Z87-HD3
TG Sapphire HD 7950 Vapor-X
SSD Disk Samgung 260 GB.
Windows 7 64 bits.

The thing is that after assembling the hardware, I installed w7 64 bits without problems. Then the chipset drivers, LAN, USB 3, realtek and framework 4.0 and everything correct

The problem comes when installing the catalysts. I installed the ones that come with the card's CD. It says that they are installed correctly but then the ATI Technologies folder is empty. I try to delete that folder and install them in another and the same thing, always empty.
I downloaded drivers from amd (the 13.9 win 7 win8 dd ccc whql) and the same thing.

With the program TECHPowerUp GPUz it recognizes the TG Sapphire and it appears as drivers installed: atimdag 6.1.7600.16385/ win 7 64 (I think they are generic and very old)

I have done this several times and everything remains the same. I reinstall w7 and the same thing.

Can you help me and tell me what I can do?
I don't know why the drivers are not installed.

Return the ATi graphics card and buy a nVidia?

What do you recommend.

Greetings and I hope for your advice.

Have you put the Windows updates?
especially the frameworks, I would also look at the bios if you updated it, here I see one that says PCIE compatibility.
http://www.gigabyte.com/products/product-page.aspx?pid=4489#bios

It would also be better to put a driver but download it from the AMD page, the driver from the CD may not recognize the 1150 platform because when that card came out the z87 had not come out, that's why it's better to put a current one.

regards

[Deferro]

Hello to all.

I have tested a Radeon X1900 and a RaDEON dH 4870.
The system recognizes the graphics but does not install the drivers and the CCC.

In the end I decide to install w7 32 bits and EVERYTHING WORKS PERFECTLY.

However I have updated the w7 64 and it had SP1 and framework 4.=. I do not know exactly why this windows does not work for me.

Greetings.

[whoololon]

For the driver issue, try Driver Easy.
Personally, CCC has given me problems with some games, so I don't recommend installing it. Instead, RivaTuner has given me better results.

[Deferro]

Hello.
I have tried to find only the drivers without the CCC so that I do not have to install it but I do not know where.

Best regards.

[Obione]

http://support.amd.com/us/gpudownload/Pages/index.aspx

Desktop graphics, then select HD.

[whoololon]

If the installer hasn't changed much since I stopped using it, in the "Custom" installation mode, it allows you to select what to install, in which case you just wouldn't check the box for CCC.

[Deferro]

Ok. I'll look into it.
If I can finally get m.e. to work on w7 64 I'll post it.

Greetings to all.

[Sylver]

Look for another version of Windows 7 64-bit, which is also wrong the one you have.

Regards

[Deferro]

Tb lo he pensado. Pero esa prueba la haré mas adelante. Saludos.