Test of the Real Nvidia Gtx Titan, single-sli-tri Sli, 4 WAY SLI
-
The tinkering can handle me and with this purchase I want to keep the team going until the end of 2015, playing to the fullest!
What about the led, zul or green how do you put them? True that looking at your modding in N3D it's over the top
I see putting another radiator as not very necessary, let's see what parts you recommend in Prosilentpc to finish the R.L with Titan sliBest regards!
It's normal that you want to keep it going, I suppose that all of us who have Titan will stretch it in our hands as much as possible.
Let me explain. The led that you have seen in my Mod, are led strips and you can choose the color you want, for your case I would put the red one. You can find the led in nearby stores specialized in lighting or electronics. They usually sell it by meters, you should measure where you are going to place it and cut to size for its placement. You will need tin and a soldering iron to solder a piece of cable that would be powered at 12v.
There are several types of led strips, some illuminate from the front and there are others that I am looking at for my new Mod that the lighting comes out to the side not from the front. You would need the one that illuminates from the front and we would place it on the back of the block in the area of the metraquilate, in such a way that if you look at it from the front, when it is placed you will see the effect of the color with the metraquilate. I advise you to use glue to stick it, even though it comes with adhesive but it can come off with the temperatures.
If you are willing to do it just send me a private message and I will explain it to you step by step, ok.Best regards.
-
Will it work with just one sli? This model is not for 3 graphics?
This is the model you recommend me not to:EK-FC Bridge DUAL Parallel 3-Slot
Better this one not?:
To mount it on the motherboard formula between the two graphics I have the sound card Xi-Fi on the pci-e
will I have to put it in the last slot so it doesn't bother?
I'm new at this. thank you very much for the helpRegards
Pd: The 3 slot would be better due to the separation of the pci-e x16 in sli. Correct?
-
I would buy the triple slot plus the plate, so it's more configurable. You can put the sound card between the 2 graphics without any problem in the black pci-e x8 slot. So you will have the X16 graphics, Wait I'll look at the formula layout and I'll tell you
-
Xenxo if you decide on EK I recommend putting blocks with the bridge in parallel not in series, so as not to restrict much, besides you will get the same temperatures in both graphics
Sorry Jotole I misunderstood you, I thought you had 3 triple radiators for graphics only. Personally I would have put a double loop parallel not series. By putting 2 pumps in series you gain pressure, not flow rate and I don't think you need to raise the liquid 3 floors high. I tell you Jotole, I wish you had mounted a parallel so that you could see that if your ventilation in the radiators worked well you would have lowered the temperature more, not by much, but still something.
Nothing calm, Well maybe I'll change it, I'm turning the jar over to see what I do now, this not being able to sit still…...............:ugly:
A Saludoi
-
At the end of this month I will buy the Ek block and the triple slot and the plate. Let's see what they tell me at Prosilentpc
I hope that next week the Titan arrives! I'm already anxious for Sli!
I'll think about the leds with Ruruloko because it can be pm
I'm looking at the reviews on Sli forums for the Titan and it's a great purchase for playing in surround resolutions
Thanks to all of you for your valuable helpRegards
-
Xenxo, you really need a triple at least. I'm looking at the layout of the formula X79 and the first slot is X16 red, the second is x8 red, the third is pci x1 black small and the next one is red X16.Si if you want to have maximum performance you must put the SLI on these 2 reds that I told you, so that both graphics go X16. Now you have to tell me what sound card it is if pci or pci-ex, tell me the model and I'll tell you where you can put it
-
Yes, I was thinking about it and you are right.
Let's see how the R.L behaves with the two radiators and SliBest regards
-
I can already see your sound card in your signature, put it in any of the blacks, because if you mount it in one of the reds, the second graphics card will work X8 and you can mount it in any of the 2 blacks, that is, between the 2 graphics cards or under the second graphics card. -
Well the heat arrived, 25ºC ambient temperature, when playing the graphics reaches 86º and 93% fan, I think that's too much.
I'm looking to upgrade the tower, I don't know if I'll lower the temperature, what do you think?
I'm between the Thermaltake level 10 GT or the cooler master haf XM and adding 2 Antec big boy 200mm coolers, one on the top and the other on the side.
-
Well, the heat arrived, 25ºC room temperature, playing the graphics reaches 86º and 93% fan, I think that's too much.
I'm looking to upgrade the tower, I don't know if I'll gain by lowering the temperature, what do you think?
I'm between the Thermaltake GT 10 or the cooler master haf XM and adding 2 Antec big boy 200mm coolers, one on the top and the other on the side.
And a fan profile? it's strange because that's what my 480s did and I had two and a sound card in between, it's to make the fan accelerate earlier, when passing 45º for example, it goes up to 65% and when passing 60º it goes up to 70 or 75%, I don't think it's necessary more, here in summer we have temperatures of more than 30º in the shade, on the street it can go over 40º. I don't think mine will ever reach that much being alone.
regards
-
And a fan profile? It's strange because that's what my 480s did and I had two and a sound card in between, it's about making the fan speed up earlier, when it goes from 45º for example, it goes up to 65% and when it goes from 60º it goes up to 70 or 75% I don't think it needs more, here in summer we have temperatures of more than 30º in the shade, on the street it can go over 40º. I don't think mine will ever reach that much being alone.
regards
The profile is created, the other option would be to put the bios of 1.17v instead of the one of 1.21v to see if the temperature doesn't go up so much.
But it gets too hot, even putting a fan directly on the pc at maximum speed it goes down to 77º and 79% the fan.
From there I would say that I need to do something and I've been thinking about the tower for a while and I don't know which one to decide on.
regards.
-
The profile is created, the other option would be to put the bios of 1.17v instead of the one of 1.21v to see if it doesn't go up so much in temperature.
But it gets too hot, even putting a fan directly on the pc at maximum speed it goes down to 77º and 79% the fan.
From there I would say that I need to do something and I've been looking into the tower for a while now and I don't know which one to decide on.
Regards.
A good tower is important, at least one that brings in air and takes out hot air, mine takes out a lot of heat from inside, although the filters get dirty quickly and it's uncomfortable to clean them.
What is also somewhat normal is that a card gets hot in the summer, more so if you use high resolutions, because even if you put vsync they will work at full capacity.
I'm more bothered that it's hot when I'm not playing, that it needs to turn up the fan while on the desktop, playing it seems more normal although luckily this 780 seems pretty cool, although of course I expect the temperature to go up more in the summer.
right now I have all the fans at minimum and on the desktop the profile of the graphics doesn't go above 25%, that's the minimum I have set, although I prefer the fans to speed up sooner when playing, but in Splinter cell it doesn't reach 60º that's if the fan is at 54%, in the summer it's possible that the temperature goes up 15º when playing, but I think that's normal.
regards
-
A good tower is important, at least one that lets air in and lets hot air out, mine lets out a lot of heat from inside, although the filters get dirty quickly and it's uncomfortable to clean them.
What is also somewhat normal is for a card to get hot in the summer, more so if you use high resolutions, because even if you put vsync they will work at full capacity.
I'm more bothered that it's hot when I'm not playing, that it needs to turn the fan up while on the desktop, when playing I see it as more normal although luckily this 780 seems pretty cool, although of course I expect the temperature to rise more in the summer.
right now I have all the fans at a minimum and on the desktop the graphics profile doesn't go above 25%, that's the minimum I have set, although I prefer the fans to speed up sooner when playing, but in Splinter cell it doesn't reach 60ºC that's if the fan is at 54%, in the summer it's possible that the temperature will rise by 15ºC when playing, but I think that's normal.
regards
I was testing by overclocking the graphics to 1100 it gets to 87ºC and the fan 95%, then I did the reverse that it doesn't go above 880 and it reaches 83ºC and Fan 89% always at 25ºC ambient temperature.-
So to change the tower, I agree with the dust I want something that contains it because I live across from a match factory and they grind and burn wood and the pc is always with that annoying little dust :llorar:, I think the thermaltake level 10 GT is better at that than the cooler master haf xm.
Now summer is approaching and I will easily reach 30-33ºC so I suppose it will exceed 90ºC with the fan at 100% :ugly:.
I think I'll go for the Thermaltake, although I can't find any reviews of the Cooler Master with a side cooler.-
regards.-
-
I was testing it by setting the OC to 1100 and the graphics card reached 87ºC and the fan to 95%, then I did the reverse that it didn't exceed 880 and it reached 83ºC and Fan 89% always at 25ºC ambient temperature.
So I'm changing the case, I agree with the dust I want something that contains it because I live in front of a match factory and they grind and burn wood and the PC is always with that annoying dust :llorar:, I think the thermaltake level 10 GT is better in that aspect than the cooler master haf xm.
Now summer is approaching and I will easily reach 30-33ºC so I guess it will exceed 90ºC with the fan at 100% :ugly:.
I think I'll go for the Thermaltake, although I can't find any reviews of the Cooler Master with side cooler.
Regards.
The filters remove dust but also ventilation, when they get dirty you can notice the temperature of the components quite a lot, especially in summer.
For me it's important that the filters are easy to clean, you shouldn't have to disassemble much to clean the filters, mine has that problem that I have to disassemble quite a lot and remove many screws to clean them.
That's why when I look at cases I look that you shouldn't have to do much to take out and clean the filters.
regards
-
The filters remove dust but also ventilation, when they get dirty you can notice the temperature of the components quite a lot, especially in summer.
For me it is important that the filters are easy to clean, that you don't have to disassemble much to clean the filters, mine has that drawback that I have to disassemble quite a lot and remove many screws to clean them.
That's why when I look at cases I look to see that you don't have to do much to take out and clean the filters.
regards
If that's what I liked about the level 10 GT I will already count on the change as an improvement in the temperature of the Titan.
Regards.-
-
Today the second Titan Asus arrived, I just plugged it into the x79 motherboard and it works wonderfully.
I check with gpu-z:
Asus's ASIC is 79.8%
Zotac's ASIC is 64.1%
I would like to put a bios of 1.21v and remove the famous boost because the Mhz go up and down.
I have configured these values in Evga Precision that I think are correct in both graphics but in games they show that the mhz go up and down
Power limit +106%
Gpu Clock + 125 Mhz
Mem Clock + 150 Mhz
What bios do I put? Those of you who have sli of titan with stock bios, there is no longer the famous micro stuttering and throttling. I suffered with sli of gtx 480 and what a mess.
In a few weeks I will buy these components from Prosilentpc to put them in R.L.:
1x EK-FC Titan SE Block
1x Ek_FC Titan Backplate
1x EK-FC Link BLANK Parallel CSQ
1x EK-FC Bridge TRIPLE Parallel CSQ Plexi
I think the order is correct. I mentioned putting another 240MM radiator in the bottom part of the case and they told me it was not necessary. What do you think?
Regards -
Today I received the second Asus Titan, I just plugged it into the x79 motherboard and it works wonderfully.
I checked with gpu-z:Asus's ASIC is 79.8%
Zotac's ASIC is 64.1%I would like to put a 1.21v bios on it and remove the famous boost because the Mhz go up and down.
I have configured these values in Evga Precision that I think are correct on both graphics cards but in games they show that the Mhz go up and downPower limit +106%
Gpu Clock + 125 Mhz
Mem Clock + 150 MhzWhich bios should I put? Those of you who have sli of titan with stock bios, there is no more famous micro stuttering and throttling. I suffered with sli of gtx 480 and what a mess.
In a few weeks I will buy these components from Prosilentpc to put them in R.L.:1x EK-FC Titan SE block
1x Ek_FC Titan backplate
1x EK-FC Link BLANK Parallel CSQ
1x EK-FC Bridge TRIPLE Parallel CSQ PlexiI think the order is correct. I mentioned putting another 240MM radiator in the bottom of the case and they said it was not necessary. What do you think?
Regards
I wouldn't complicate my life, the GK110 has a protection for flashing and it can be dangerous, it has the bios and an EEPROM, I have mine with its original bios.
Also, one of yours is good but the other is not, if the bad one maybe goes up more if you give it voltage but it's almost more advisable to put the good one from Master and the bad one from the second, put the OC with its bios because in the end the OC for gaming is not the same as for benchmark and if you can leave both at 1150 Mhz it should already be good, because in the end that Zotac will limit the OC even if you give it voltage.I honestly don't see it as very recommendable because it involves a risk and the Titans are very expensive graphics, the good one should facilitate the OC if you put it as master.
Regards
-
Many thanks fjavi for your great and good advice.
But I would like to remove the boost and leave them at 1006Mhz
I will use the bios of skyn3t rev 2:-
Base core clock 928Mhz & 1006Mhz* Boost Disabled* Voltage unlocked 1.212v* Default power target 300W instead 350W with 200% slide unlocked to 600w "Yup The King Must have a good amount of it"* Mn fan speed adjustable to 20% Max 100%
I think it's worth it and I don't think anything will happen. It's a risk but I think I'll end up doing it.
When I disassemble I will change the order of graphics and for games raise them to 1100Mhz and that's it.
What about the R.L, better not to mount another radiator? What do you think?Regards
-
-
Many thanks fjavi for your great and good advice.
But I would like to remove the boost and leave them at 1006Mhz
I will use the bios from skyn3t rev 2:-
Base core clock 928Mhz & 1006Mhz* Boost Disabled* Voltage unlocked 1.212v* Default power target 300W instead 350W with 200% slide unlocked to 600w "Yup The King Must have a good amount of it"* Mn fan speed adjustable to 20% Max 100%
I think it's worth it and I don't think anything will happen. It's a risk but I think I'll end up doing it.
When I disassemble I will change the order of graphics and for games raise them to 1100Mhz and that's it.
What about the R.L, better not to mount another radiator? What do you think?Regards
I have no idea about R.L, but this tutorial may be useful for you, it's in English, maybe you'll find some indications in Spanish, but this one is for the Titan, then you put the bios that you're most interested in, I think the one from Skyn3t is the most used and the one that works best.
http://forums.evga.com/tm.aspx?m=1891166
http://www.overclock.net/t/1363440/nvidia-geforce-gtx-titan-owners-clublet's see if some expert in R.L tells you about the radiator.
regards
-
-
Finally, both cards are flashed with the skynet rev2 bios. I took the risk finally!
I have the stock bios saved just in case.These bios are at 1006Mhz by default and the boost is removed, I think that's what they are.
Besides, I'll raise them to 1100 Mhz at most if I can increase the voltage with the Evga Precision.I just checked in Grid 2 that the Zotac goes to 1.20v and the Asus goes to 1.16V I suppose it will be because of the ASIC. Is it normal?
In the Evga precision they have the default valuesSoon I will put the Asus with an EK block it reaches 70º with the stock cooler
The thing about the 3 radiator of 240mm I see it a bit exaggerated for graphics and I7 3930K at 4.4Ghz, let's see what you recommend here.
Jotele I think told me that it's a bit tight for this equipment, I'm in doubt about what to do.
Thanks to all for your valuable help, guys!Regards
