• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Are these temperatures normal?

    Programado Fijo Cerrado Movido Tarjetas Gráficas
    4 Mensajes 4 Posters 1.0k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • P Desconectado
      porketero
      Última edición por

      Hello, I have an AMD Radeon 7990 HD mounted by Shappire, this one:

      And the graphics card goes up to temperatures of almost 90 degrees just by playing Bioshock Infinite, the same with Crysis. The fan goes up a little and sometimes I have to turn it up manually…
      Is it normal for it to get to that temperature? Do I have to turn the fan up more manually or is there a program? Does this happen to you guys?

      It's DUAL GPU, I'll show you the screenshots of each of the GPUs:

      And finally another thing, why don't they work together instead of one working at full capacity and the other at 2 or 3%?

      Thanks a lot in advance ?

      1 Respuesta Última respuesta Responder Citar 0
      • SylverS Desconectado
        Sylver Veteranos HL
        Última edición por

        Good

        Those temperatures are normal, GPUs get very hot, although what is not so normal is that the fan does not go up much automatically. I do not see the photo (if you have put it) of the graphics in question, so I do not know how many fans it has, but you can try to turn them up manually when you play, to stay more at ease.

        Greetings

        >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
        >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
        >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

        ObioneO 1 Respuesta Última respuesta Responder Citar 0
        • ObioneO Desconectado
          Obione Veteranos HL @Sylver
          Última edición por

          Adjust it via software, there are simple ones although my preferred one (SpeedFan) is a bit more complicated to set up. Create a profile so that it doesn't exceed 80º in any of its components (you can check the different sensors with GPU-Z) and you forget about fiddling around.

          Be very careful with certain programs, make sure that the regulation is correct so that you don't fry it due to a configuration error.

          Fractal Design Define R4 - 4 x Servo Gentle Typhoon - Be Quiet SilentWings USC 140 - BitFenix Formula Gold 550W - Asus Crosshair VI Hero - AMD Ryzen 5 3600 - Thermalright Macho Rev.B - 2x8GB Crucial Ballistix Sport AT 3200 - MSI GTX 1070 Gaming X - Corsair MP510 480GB - Seagate 7200.14 1TB - Yamaha HS 7 ♫ ASUS Xonar DGX ♫ Beyer Dynamic MMX-300 - LG 23MP57VQ-P - Oculus Rift CV1 - Logitech G27 - Zalem V2

          F 1 Respuesta Última respuesta Responder Citar 0
          • F Desconectado
            fjavi @Obione
            Última edición por

            In duales it is normal to have higher temperatures, what you can do when playing is force vsync so that it only gives the necessary frames and make a fan profile with MSI afterburner, which speeds up the fan earlier, for example when passing from 65º the fan goes up, because the factory profiles are very conservative and only go up when passing from 80º, so then it is more difficult to cool it down.

            saludos

            1 Respuesta Última respuesta Responder Citar 0
            • 1 / 1
            • First post
              Last post

            Foreros conectados [Conectados hoy]

            0 usuarios activos (0 miembros y 0 invitados).
            febesin, pAtO,

            Estadísticas de Hardlimit

            Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
            Somos un total de 34.9k miembros registrados.
            roymendez ha sido nuestro último fichaje.
            El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.