Improve AMD HS78 heatsink. Is it possible? [by changing a few things]
-
Hello, I'm going to build a computer, and for the processor I'm going to buy an AMD FX-4130 with AMD HS78 cooler [the one that comes standard] my question is could the performance of this be improved?
I don't know, by changing the fan [if it can], by putting better thermal paste... Etc
I ask this to instead of overclocking it to 4ghz, overclock it to 4.2
Could it be done?
Thanks in advance -
The AMD heatsinks perform their function correctly.
The fan is probably 70x70x15mm, a size that is not as easy to find as the 80x80x25 (or the 90 ones).The recommendation if you want to do OC is clear: Buy a good heatsink, which is not synonymous with expensive
If you can't change the heatsink, use a good thermal paste and maintain good case ventilation. Then keep an eye on how the temperatures are going.
Regards.
Sent from my GameBoy using Tapatalk 2
-
The fan is 80x80mm
Sent from my iPad using Tapatalk
-
Well, if it's 80x80x15, you have it easy... Install one of 80x80x25 that gives, at equal rpm, more flow.
If it were 80x80x25, you could install a 120 to 80 adapter and put a 120x120 fan in it, but those are things that were done before, when there wasn't as much variety of heatsinks. Now I tell you that you have better heatsinks than the stock one for very little money.
Regards.
-
Here is a small comparison in which the FX 4130 appears with the stock cooler at 4.2Ghz and with a maximum temperature under load of 59ºC (fan at 100%), which is not bad.
Best regards.
-
Ok thanks, but that with good thermal paste, right?
Sent from my iPad using Tapatalk
-
I haven't read it all, but if it says stock, it will be with the one that comes with the heatsink.
As I told you, if the fan is 80x80x15, change it for one the same but 25mm thick, and you will be able to maintain the same temperatures with fewer rpm and therefore less noise.
Regards.
Sent from my GameBoy using Tapatalk 2
Sent from my GameBoy using Tapatalk 2
-
Ok, muchas gracias!
Sent from my iPad using Tapatalk
-
You do not say the current temperatures of your CPU.
Change the thermal paste if you have never changed it for artic silver 5 for example and measure the temperatures again, try the 4.2ghz and if they are acceptable temperatures, do not change anything.
I would not change fans, better to save for a better heatsink that will not cost much more.
Greetings
Sent from my Z2 using Tapatalk
-
You don't say the current temperatures of your CPU.
Change the thermal paste if you have never changed it for artic silver 5 for example and measure the temperatures again, test the 4.2ghz and if they are acceptable temperatures, don't change anything.
I wouldn't change the fans, better to save for a better heatsink that won't cost much more.
Regards
Sent from my Z2 using Tapatalk
Look, I said I'm going to buy that processor, not that I have it!
Sent from my iPad using Tapatalk
-
Let me see, I said I was going to buy that processor, not that I already have it!
Sent from my iPad using Tapatalk
So just buy one of these and you'll save yourself all sorts of problems:
Cooler Master Hyper 412S CPU Cooler RR-H412-13FK-R1 Fan/Cooler
Even with this one you're already better off:
Cooler Master Hyper TX3 EVO CPU Cooler RR-TX3E-22PK-R1 Fan/Cooler
Best regards
-
Hello, I'm going to build a computer, and for the processor I'm going to buy an AMD FX-4130 with the HS78 cooler from amd [the one that comes standard] my question is, could the performance of this be improved?
I don't know, by changing the fan [if it can be done], by putting better thermal paste... Etc
I ask this in order to instead of overclocking it to 4ghz, overclock it to 4.2
Could it be done?
Thanks in advanceKeeping the stock cooler on AMDs is optional if:
- The room temperature will never exceed 20º C. and/or
- The temperature inside the case will never exceed 30º C. and/or
- You don't plan to overclock. and/or
- You can't afford to get a better one in the short term.
For other purposes, mounting a more efficient cooler is not only recommended, but almost mandatory.
