Overclock Corsair RAM to 1866 Mhz
-
I have a small problem: a while ago I set my memories to 1866 Mhz and they were working perfectly. Then, after a while I reset the BIOS and tried to set them to the same speed again, but I couldn't remember the configuration I had and it turns out that they are set to Single Channel, recognizing only 1 memory. Does anyone have an idea why this is happening? I've also tried updating the BIOS and nothing.
My PC is as follows:
Processor: AMD FX 6100 4.1Ghz
VGA: XFX HD 6850 Black edition
Memorias: Corsair Vegeance 1600 Mhz 8GB
HDD: 500Gb Hitachi 7200RPM
MOBO: Asus M5A78L-M LX3
-
Remove the modules, carefully clean the dust from the slots and try again.
Best regards
>> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
>> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
>> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W -
Does the bios recognize them well? -
Does the bios recognize them well?
Or said in another way so that it is not confused with an object, did you see that it only recognizes a module in Windows, or does the bios and the POST also only recognize a module?
I understand that you did a reset, not an update or rewrite of bios.
Why did you need to reset it? Was it doing oc?
Sometimes the reset resists and you have to repeat it, or do it in a thorough way.
Salu2.
