• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Help OC GA-X79-UD5 and i7 3820 motherboard

    Programado Fijo Cerrado Movido Overclock
    8 Mensajes 3 Posters 2.1k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • F Desconectado
      filipi90
      Última edición por

      I would like to overclock my computer but I can't go beyond 4.3GHZ which is the maximum multiplier allowed by this CPU. When I try to increase the bus, the computer does not start and I have to reset the Bios.

      The computer has the following components:

      Motherboard: GA-X79-UD5
      CPU: i7 3820
      RAM: 2*4GB kingston hyperx 1600MHZ A 1.65V
      Graphics: Gigabyte GTX770 4 GB DDR5 OC VERSION

      1 Respuesta Última respuesta Responder Citar 0
      • EspinetenbolasE Desconectado
        Espinetenbolas Veteranos HL
        Última edición por

        I'm really disconnected and I don't know much about this platform, but the best thing is that you look at a guide like this.

        http://www.overclock.net/t/1189242/sandy-bridge-e-overclocking-guide-walk-through-explanations-and-support-for-all-x79-overclockers

        If you haven't touched the voltages or disabled certain things in the Bios, it's very possible that this is the problem.

        Greetings and welcome to the forum

        F 1 Respuesta Última respuesta Responder Citar 0
        • F Desconectado
          filipi90 @Espinetenbolas
          Última edición por

          @Espinetenbolas:

          I'm really disconnected and I don't know much about this platform, but the best thing is that you look at a guide like this.

          http://www.overclock.net/t/1189242/sandy-bridge-e-overclocking-guide-walk-through-explanations-and-support-for-all-x79-overclockers

          If you haven't touched the voltages or disabled certain things in the Bios, it's very possible that this is the problem.

          Greetings and welcome to the forum

          Thanks for the advice, I'll read the tutorial when I can and I'll tell you how it goes.

          Thanks again

          1 Respuesta Última respuesta Responder Citar 0
          • F Desconectado
            filipi90
            Última edición por

            Looking at the guide and following the values, I managed to overclock to 4.3 by bus instead of by multi, but when I tried to reach 4.5, the computer wouldn't start and gave an error. I set the voltages to the maximum recommended, but even so, I haven't achieved anything. If anyone can help me, I would greatly appreciate it.

            ObioneO 1 Respuesta Última respuesta Responder Citar 0
            • ObioneO Desconectado
              Obione Veteranos HL @filipi90
              Última edición por

              If I were you, I would stay at the point where the voltage demand does not skyrocket; 4.5 is quite enough for that micro.

              Fractal Design Define R4 - 4 x Servo Gentle Typhoon - Be Quiet SilentWings USC 140 - BitFenix Formula Gold 550W - Asus Crosshair VI Hero - AMD Ryzen 5 3600 - Thermalright Macho Rev.B - 2x8GB Crucial Ballistix Sport AT 3200 - MSI GTX 1070 Gaming X - Corsair MP510 480GB - Seagate 7200.14 1TB - Yamaha HS 7 ♫ ASUS Xonar DGX ♫ Beyer Dynamic MMX-300 - LG 23MP57VQ-P - Oculus Rift CV1 - Logitech G27 - Zalem V2

              1 Respuesta Última respuesta Responder Citar 0
              • F Desconectado
                filipi90
                Última edición por

                Well, I'm going to stick with the 4.3 for multi and out

                Thanks for your help

                1 Respuesta Última respuesta Responder Citar 0
                • F Desconectado
                  filipi90
                  Última edición por

                  In the end, after testing, I reached 4.5 but I will only put it on occasionally jeje for normal use and to play I will leave it at 4.3 which I think is enough jeje.

                  Pd: at 4.5 and with a little oc to the graphics I got 11,750 in the 3d mark11 is a good score for my team?

                  1 Respuesta Última respuesta Responder Citar 0
                  • F Desconectado
                    filipi90
                    Última edición por

                    In the end, after testing, I reached 4.5 but I will only put it on occasionally jeje for normal use and to play I will leave it at 4.3 which I think is enough jeje.

                    Pd: at 4.5 and with a little oc to the graphics I got 11,750 in the 3d mark11 is a good score for my team?

                    1 Respuesta Última respuesta Responder Citar 0
                    • 1 / 1
                    • First post
                      Last post

                    Foreros conectados [Conectados hoy]

                    0 usuarios activos (0 miembros y 0 invitados).
                    febesin, pAtO,

                    Estadísticas de Hardlimit

                    Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
                    Somos un total de 34.9k miembros registrados.
                    roymendez ha sido nuestro último fichaje.
                    El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.