• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Problem with ATI 4890

    Programado Fijo Cerrado Movido Tarjetas Gráficas
    5 Mensajes 3 Posters 1.2k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • P Desconectado
      pabloazazel
      Última edición por

      I'm so annoyed, I took apart the heatsink to change the paste and clean the dust from the heatsink because I saw that it was giving a little high temperatures, I put a new one and now the computer doesn't give me an image, I should say that I also did the same with the processor. I bought the computer by parts and I assembled it myself, I mean I have experience, it's all connected, I also changed the pci slots on the card, the computer turns on and all the fans move but it doesn't give an image, I suppose it's a problem with the graphics or the power supply but it's that it worked perfectly before I don't understand, by the way it doesn't give any beep

      1 Respuesta Última respuesta Responder Citar 0
      • GyGaByTe_28G Desconectado
        GyGaByTe_28
        Última edición por

        @pabloazazel:

        what a pain in the ass I have, I disassembled the heatsink to change the paste and clean the dust from the heatsink since I saw that it was giving a bit high temperatures, I put a new one and now the computer does not give me an image, I say that I also did the same with the processor. I bought the computer in pieces and I assembled it myself, I mean I have experience, everything is connected, I also changed the pci slots to the card, the computer turns on and all the fans move but it does not give an image, I suppose it is a problem of graphics or power supply but it is that before it worked perfectly I do not understand, by the way it does not give any beep

        clean the pci express connection of the graphics with an eraser, press all the copper contacts on both sides. I have had this happen with many PCs, a bad contact in any copper pin and it can give you a big headache.

        whoololonW 1 Respuesta Última respuesta Responder Citar 0
        • whoololonW Desconectado
          whoololon Veteranos HL @GyGaByTe_28
          Última edición por

          If the graphics card fails or the source usually does not give error tones. Clean the contacts, if you have integrated graphics, remove the discrete one and try with it.
          Good luck. ?

          ...me lo dicen las voces...

          hlbm signature

          1 Respuesta Última respuesta Responder Citar 0
          • P Desconectado
            pabloazazel
            Última edición por

            well I don't know what could have happened, I just tried another graphics card and everything works perfectly, so the problem is clearly the graphics card but I don't understand what could have happened, any advice???

            whoololonW 1 Respuesta Última respuesta Responder Citar 0
            • whoololonW Desconectado
              whoololon Veteranos HL @pabloazazel
              Última edición por

              @pabloazazel:

              well I don't know what could have happened, I just tried another graphics card and everything works perfectly, so the problem is clearly the graphics card but I don't understand what could have happened, any advice???

              I've seen a Gigabyte GTX 750 OC 2GB-GDDR5 for around 115€.

              ...me lo dicen las voces...

              hlbm signature

              1 Respuesta Última respuesta Responder Citar 0
              • 1 / 1
              • First post
                Last post

              Foreros conectados [Conectados hoy]

              1 usuarios activos (1 miembros y 0 invitados).
              febesin, pAtO,

              Estadísticas de Hardlimit

              Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
              Somos un total de 34.9k miembros registrados.
              roymendez ha sido nuestro último fichaje.
              El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.