• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    HardLimit on hwbot.org

    Programado Fijo Cerrado Movido Overclock
    150 Mensajes 35 Posters 44.4k Visitas 2 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • ferelxyxF Desconectado
      ferelxyx Veteranos HL @jordiqui
      Última edición por

      This post is being processed/translated. The original version will be shown:

      tranquilo no pasa nada , un despiste lo tiene cualquiera

      saludos

      YorusY 1 Respuesta Última respuesta Responder Citar 0
      • YorusY Desconectado
        Yorus Veteranos HL @ferelxyx
        Última edición por

        This post is being processed/translated. The original version will be shown:

        Despues de casi 6 horas y media de cálculos ya tengo otra copita gracias a la bestia parda:

        Edito: Creo que tengo otro matagigantes, no he visto ningún Celeron 433 que haya pasado el 3Dmark en ninguna de sus versiones y yo le puedo poner la 8400GS PCI del C7.

        Mi centro de operaciones
        Mi blog en HL

        hlbm signature

        E 1 Respuesta Última respuesta Responder Citar 0
        • E Desconectado
          ese_xema @Yorus
          Última edición por

          This post is being processed/translated. The original version will be shown:

          ola chicos, me uno a vuestro equipo :), voi a acer un par de subidas aver q tal 😉

          E 1 Respuesta Última respuesta Responder Citar 0
          • E Desconectado
            ese_xema @ese_xema
            Última edición por

            This post is being processed/translated. The original version will be shown:

            0.4 puntos d mi parte, mi viejo e4500 a dado 3707.71 :D, y para mañana espero llegar a los 37xx altos 😉

            jordiquiJ 1 Respuesta Última respuesta Responder Citar 0
            • jordiquiJ Desconectado
              jordiqui Veteranos HL @ese_xema
              Última edición por

              This post is being processed/translated. The original version will be shown:

              @ese_xema:

              0.4 puntos d mi parte, mi viejo e4500 a dado 3707.71 :D, y para mañana espero llegar a los 37xx altos 😉

              Bienvenido. y a sacarle todo el partido a ese E4500 :-);)

              Cluster MPI de tres nodos formado por tres SERVIDORRES HP PROLIANT DL360P 1U 2X E5-2680V2 CPU'S, 20 cores, 40 hilos a una frecuencia base de 2,8GHz. 192 GB de memoria RAM DDR3 ECC (8 x módulos de16 GB 800Mhz)´+ 1U 2X E5.-2697 V2 a una frecuencia base de 2,8 Ghz 192 GB de Ram ECC (8 módulos de 16 Gb 800 mhz) 24 Cores 48 hilos ( 44c/88T)+ 1u 2xE5 2603v2 con una frecuencia base de 1,9ghz 64 Gb DDR3 ecc (4x módulos de 16)

              hlbm signature

              X_360X 1 Respuesta Última respuesta Responder Citar 0
              • X_360X Desconectado
                X_360 @jordiqui
                Última edición por

                This post is being processed/translated. The original version will be shown:

                Ya no le dais caña al hwbot?? De aquí a que tenga mi "peazo" micro, más mi super placa y mis super memorias :risitas: tardaré :D.

                Otra cosa, no tiene fecha de finalización el campeonato ese o lo que sea eso??

                Saludos!!

                P.D: Lo que hay un monton de españoles en equipos extranjeros, ya podrían representar a españa los muy traidores xD

                deeiividD 1 Respuesta Última respuesta Responder Citar 0
                • deeiividD Desconectado
                  deeiivid Veteranos HL @X_360
                  Última edición por

                  This post is being processed/translated. The original version will be shown:

                  Estoy en ello….
                  Quizá me veais pronto con una RL y con una mesa dimastech 😉

                  RaesanR 1 Respuesta Última respuesta Responder Citar 0
                  • RaesanR Desconectado
                    Raesan @deeiivid
                    Última edición por

                    This post is being processed/translated. The original version will be shown:

                    Vamos, parece que el interés por el oc. decae. Yo me puesto para curiosear hasta donde llega mi PhenomII X3 720.

                    TecnhoT 1 Respuesta Última respuesta Responder Citar 0
                    • TecnhoT Desconectado
                      Tecnho Veteranos HL @Raesan
                      Última edición por

                      This post is being processed/translated. The original version will be shown:

                      yo ya le dí pero a ver si me pongo y subo unas cuantas ni me acordaba ya.

                      hlbm signature

                      1 Respuesta Última respuesta Responder Citar 0
                      • jordiquiJ Desconectado
                        jordiqui Veteranos HL
                        Última edición por

                        Hello friends, I have lost the email of jordiqui on this platform, desvelemosafrica is the nickname, I mention it to add myself to the team.
                        A hug

                        Cluster MPI de tres nodos formado por tres SERVIDORRES HP PROLIANT DL360P 1U 2X E5-2680V2 CPU'S, 20 cores, 40 hilos a una frecuencia base de 2,8GHz. 192 GB de memoria RAM DDR3 ECC (8 x módulos de16 GB 800Mhz)´+ 1U 2X E5.-2697 V2 a una frecuencia base de 2,8 Ghz 192 GB de Ram ECC (8 módulos de 16 Gb 800 mhz) 24 Cores 48 hilos ( 44c/88T)+ 1u 2xE5 2603v2 con una frecuencia base de 1,9ghz 64 Gb DDR3 ecc (4x módulos de 16)

                        hlbm signature

                        krampakK 1 Respuesta Última respuesta Responder Citar 1
                        • krampakK Desconectado
                          krampak Global Moderator @jordiqui
                          Última edición por

                          @jordiqui Wow, it's been 11 years since the last post ? I don't even know if I remember the credentials to administer the team jejejeje

                          Mi Configuración
                          hlbm signature

                          jordiquiJ 1 Respuesta Última respuesta Responder Citar 1
                          • jordiquiJ Desconectado
                            jordiqui Veteranos HL @krampak
                            Última edición por

                            @krampak Normal. With the time that has passed it is understandable. I have been trying to register within the team with the new nickname and I do not know if I have read that no more members were accepted. And you are I think the only administrator of that site. In any case, a hug dear friend. By the way, in a few months I start to pedal again. I needed time to disconnect.

                            Cluster MPI de tres nodos formado por tres SERVIDORRES HP PROLIANT DL360P 1U 2X E5-2680V2 CPU'S, 20 cores, 40 hilos a una frecuencia base de 2,8GHz. 192 GB de memoria RAM DDR3 ECC (8 x módulos de16 GB 800Mhz)´+ 1U 2X E5.-2697 V2 a una frecuencia base de 2,8 Ghz 192 GB de Ram ECC (8 módulos de 16 Gb 800 mhz) 24 Cores 48 hilos ( 44c/88T)+ 1u 2xE5 2603v2 con una frecuencia base de 1,9ghz 64 Gb DDR3 ecc (4x módulos de 16)

                            hlbm signature

                            krampakK 1 Respuesta Última respuesta Responder Citar 1
                            • krampakK Desconectado
                              krampak Global Moderator @jordiqui
                              Última edición por krampak

                              I've got my access back jejeje I can see your recent posts.

                              e4ce18f2-4d45-436c-80d1-69bae8fd25c6-image.png

                              0910924e-7492-46dc-9b74-18c9fa94c6b2-image.png

                              Still being the 8th Spanish team and 383rd worldwide xD xD what memories! By the way, @jordiqui was the only member we had in the extreme league ?

                              7e48db34-ba50-41dd-aeb3-148782da68d9-image.png

                              P.S.: I'm glad to hear you're back on track!

                              Mi Configuración
                              hlbm signature

                              1 Respuesta Última respuesta Responder Citar 1
                              • jordiquiJ Desconectado
                                jordiqui Veteranos HL
                                Última edición por

                                jajjjaja- Wait, even though the server has a chassis, I can't anchor a good GPU right away. I put a Gt 730 in it that doesn't need extra power and I could install it in the PCI-e adapter that the machine has. I'll spend the day running all the tests I can with the server, another day with the laptop, which I saw that you can overclock the GPU a bit, and tweak several things with the Asus utility. Let's go for it and see how it goes.

                                Cluster MPI de tres nodos formado por tres SERVIDORRES HP PROLIANT DL360P 1U 2X E5-2680V2 CPU'S, 20 cores, 40 hilos a una frecuencia base de 2,8GHz. 192 GB de memoria RAM DDR3 ECC (8 x módulos de16 GB 800Mhz)´+ 1U 2X E5.-2697 V2 a una frecuencia base de 2,8 Ghz 192 GB de Ram ECC (8 módulos de 16 Gb 800 mhz) 24 Cores 48 hilos ( 44c/88T)+ 1u 2xE5 2603v2 con una frecuencia base de 1,9ghz 64 Gb DDR3 ecc (4x módulos de 16)

                                hlbm signature

                                jordiquiJ 1 Respuesta Última respuesta Responder Citar 0
                                • jordiquiJ Desconectado
                                  jordiqui Veteranos HL @jordiqui
                                  Última edición por

                                  @jordiqui I am answering myself and to see if anyone has experienced the same thing with Xeon processors. I spent a good time trying to get the graphics card to fit and close the case lid, but because of the heatsink, it is impossible. That doesn't matter. The issue is that when I want to validate the results, unlike the laptop that does accept the intel software to add the hardware with a file, in this old computer it doesn't. And it doesn't recognize the xeons, except as Pentium II, III etc.. I was going to run the Vantage which the laptop is doing with a little oc on the rtx 3060,. because when I saw that it was more than an hour, I gave up in case it wouldn't let me validate the result later. In cinebench it came in third, because cinebench itself in r15 I think, let me upload a screenshot, but in the others there was no way. In any case, we are going to add points to the team. A big hug.

                                  Cluster MPI de tres nodos formado por tres SERVIDORRES HP PROLIANT DL360P 1U 2X E5-2680V2 CPU'S, 20 cores, 40 hilos a una frecuencia base de 2,8GHz. 192 GB de memoria RAM DDR3 ECC (8 x módulos de16 GB 800Mhz)´+ 1U 2X E5.-2697 V2 a una frecuencia base de 2,8 Ghz 192 GB de Ram ECC (8 módulos de 16 Gb 800 mhz) 24 Cores 48 hilos ( 44c/88T)+ 1u 2xE5 2603v2 con una frecuencia base de 1,9ghz 64 Gb DDR3 ecc (4x módulos de 16)

                                  hlbm signature

                                  1 Respuesta Última respuesta Responder Citar 1
                                  • jordiquiJ Desconectado
                                    jordiqui Veteranos HL
                                    Última edición por jordiqui

                                    Hello colleagues, although I imagine that we are all busy and can't do what we did 10 or 15 years ago, at least I, spending a lot of money to do this that I like so much, I can assure you that I am having a great time at this place. The problem, as I have mentioned, is that on the one hand, by not letting me install the intel app to upgrade the hardware auto, in manual mode these xeons are not recognized. Then of course many apps cost a lot of money and you can't or I think you shouldn't add results with pirated apps. I imagine that you end up being banned and it gives a bad image. But with the bench that I can do because they are free, I enjoy like a kid. Nothing, I keep adding points and enjoying.. PD: you are going to kill me, but now I regret not having bought a tower with the intel core i9 because I will get tired of chess, but not of this. But well, it is what we have and hey for 340 euros this server is the best.
                                    ranking.jpg
                                    ? ? ? ? ? ?

                                    Cluster MPI de tres nodos formado por tres SERVIDORRES HP PROLIANT DL360P 1U 2X E5-2680V2 CPU'S, 20 cores, 40 hilos a una frecuencia base de 2,8GHz. 192 GB de memoria RAM DDR3 ECC (8 x módulos de16 GB 800Mhz)´+ 1U 2X E5.-2697 V2 a una frecuencia base de 2,8 Ghz 192 GB de Ram ECC (8 módulos de 16 Gb 800 mhz) 24 Cores 48 hilos ( 44c/88T)+ 1u 2xE5 2603v2 con una frecuencia base de 1,9ghz 64 Gb DDR3 ecc (4x módulos de 16)

                                    hlbm signature

                                    1 Respuesta Última respuesta Responder Citar 1
                                    • krampakK Desconectado
                                      krampak Global Moderator
                                      Última edición por

                                      I have a couple of notifications of unapproved results from @jordiqui. It seems like you are missing cpuz screenshots.

                                      These are the 2:

                                      http://hwbot.org/submission/4943961_desvelemosafrica_3dmark05_geforce_gt_730_(gf108)_20828_marks

                                      http://hwbot.org/submission/4944146_desvelemosafrica_superpi___1m_core_i7_11800h_7sec_296ms

                                      Mi Configuración
                                      hlbm signature

                                      jordiquiJ 1 Respuesta Última respuesta Responder Citar 2
                                      • jordiquiJ Desconectado
                                        jordiqui Veteranos HL @krampak
                                        Última edición por

                                        @krampak said in HardLimit on hwbot.org:

                                        I have a couple of notifications of unapproved results @jordiqui It seems that you are missing cpuz screenshots.

                                        These are the 2:

                                        http://hwbot.org/submission/4943961_desvelemosafrica_3dmark05_geforce_gt_730_(gf108)_20828_marks

                                        http://hwbot.org/submission/4944146_desvelemosafrica_superpi___1m_core_i7_11800h_7sec_296ms

                                        Corrected the super pi and by the way I did the 32mb one. :- thanks for letting me know

                                        Cluster MPI de tres nodos formado por tres SERVIDORRES HP PROLIANT DL360P 1U 2X E5-2680V2 CPU'S, 20 cores, 40 hilos a una frecuencia base de 2,8GHz. 192 GB de memoria RAM DDR3 ECC (8 x módulos de16 GB 800Mhz)´+ 1U 2X E5.-2697 V2 a una frecuencia base de 2,8 Ghz 192 GB de Ram ECC (8 módulos de 16 Gb 800 mhz) 24 Cores 48 hilos ( 44c/88T)+ 1u 2xE5 2603v2 con una frecuencia base de 1,9ghz 64 Gb DDR3 ecc (4x módulos de 16)

                                        hlbm signature

                                        1 Respuesta Última respuesta Responder Citar 1
                                        • jordiquiJ Desconectado
                                          jordiqui Veteranos HL
                                          Última edición por

                                          CINEBENCH R23.jpg

                                          Hello mates, I can't register this test because the app that provides the file doesn't detect the motherboard model. And in this particular test it doesn't allow you to do it manually. And the result with the turbo activated at 3.6 Ghz gives a good result that would give us points. I have already sent a message to the app's authors, with the screenshot explaining the bug that the app reports.

                                          Cluster MPI de tres nodos formado por tres SERVIDORRES HP PROLIANT DL360P 1U 2X E5-2680V2 CPU'S, 20 cores, 40 hilos a una frecuencia base de 2,8GHz. 192 GB de memoria RAM DDR3 ECC (8 x módulos de16 GB 800Mhz)´+ 1U 2X E5.-2697 V2 a una frecuencia base de 2,8 Ghz 192 GB de Ram ECC (8 módulos de 16 Gb 800 mhz) 24 Cores 48 hilos ( 44c/88T)+ 1u 2xE5 2603v2 con una frecuencia base de 1,9ghz 64 Gb DDR3 ecc (4x módulos de 16)

                                          hlbm signature

                                          1 Respuesta Última respuesta Responder Citar 2
                                          • jordiquiJ Desconectado
                                            jordiqui Veteranos HL
                                            Última edición por

                                            After messing around with the server's pci adapter, I moved the array controller card. In short, it didn't recognize the logical drives. I spent hours trying until I opened the server and by chance I saw one of the leds flashing and I saw that it wasn't properly anchored. And that's for the measly points that the Gt730 gives. But in novice we are in first place.
                                            20221116_160213.jpg

                                            Cluster MPI de tres nodos formado por tres SERVIDORRES HP PROLIANT DL360P 1U 2X E5-2680V2 CPU'S, 20 cores, 40 hilos a una frecuencia base de 2,8GHz. 192 GB de memoria RAM DDR3 ECC (8 x módulos de16 GB 800Mhz)´+ 1U 2X E5.-2697 V2 a una frecuencia base de 2,8 Ghz 192 GB de Ram ECC (8 módulos de 16 Gb 800 mhz) 24 Cores 48 hilos ( 44c/88T)+ 1u 2xE5 2603v2 con una frecuencia base de 1,9ghz 64 Gb DDR3 ecc (4x módulos de 16)

                                            hlbm signature

                                            defaultuserD 1 Respuesta Última respuesta Responder Citar 2
                                            • 1
                                            • 2
                                            • 3
                                            • 4
                                            • 5
                                            • 6
                                            • 7
                                            • 8
                                            • 7 / 8
                                            • First post
                                              Last post

                                            Foreros conectados [Conectados hoy]

                                            0 usuarios activos (0 miembros y 0 invitados).
                                            febesin, pAtO,

                                            Estadísticas de Hardlimit

                                            Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
                                            Somos un total de 34.9k miembros registrados.
                                            roymendez ha sido nuestro último fichaje.
                                            El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.