• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Error in Raid0

    Programado Fijo Cerrado Movido Hardware
    14 Mensajes 7 Posters 2.7k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • SeNSok3RS Desconectado
      SeNSok3R @Bm4n
      Última edición por

      I don't have any raid controller card, how can I do an error check like the one you mentioned?

      Thanks in advance

      ObioneO 1 Respuesta Última respuesta Responder Citar 0
      • ObioneO Desconectado
        Obione Veteranos HL @SeNSok3R
        Última edición por

        With any program that has SMART, which is a technology of the disks, not something that only some dedicated controllers have.

        1 Respuesta Última respuesta Responder Citar 0
        • SeNSok3RS Desconectado
          SeNSok3R
          Última edición por

          Thank you very much everyone ^^

          lforosL 1 Respuesta Última respuesta Responder Citar 0
          • lforosL Desconectado
            lforos Veteranos HL @SeNSok3R
            Última edición por

            Although I always share the idea of making backups even when the disks never fail (in a Raid 0 with two disks you duplicate the failure rate), it is possible that the disk is not physically bad but that a bad shutdown or a blue screen have left some data unusable, because in fact the raid 0 continues to diagnose it as normal.

            Apart from the checks that have been told to you (or better, after those checks) enter the Intel Matrix storage Console program (if you do not have it installed download it from the Intel website) and with the right button on the hard drive that has given you the error, mark it as Normal again.

            hlbm signature

            Bm4nB 1 Respuesta Última respuesta Responder Citar 0
            • Bm4nB Desconectado
              Bm4n @lforos
              Última edición por

              Although it is integrated you have a controller or else it is a bad thing, the smart can normally not be checked but through the controller's software. The intel give few options, the amd you can manually configure the checks, also sometimes there is the option of smart in raid in the bios although I do not know how it works.

              hlbm signature
              ↳ Mis componentes

              lforosL 1 Respuesta Última respuesta Responder Citar 0
              • lforosL Desconectado
                lforos Veteranos HL @Bm4n
                Última edición por

                The capture is controlled by the Intel Matrix Storage Manager, which is the typical on-board controller. As far as I know, with Intel software (Intel Matrix Storage Console) you can't see SMART information, but it does provide some useful information.

                hlbm signature

                SeNSok3RS 1 Respuesta Última respuesta Responder Citar 0
                • SeNSok3RS Desconectado
                  SeNSok3R @lforos
                  Última edición por

                  thanks for the information guys, it has been very helpful ?

                  _Neptunno__ 1 Respuesta Última respuesta Responder Citar 0
                  • _Neptunno__ Desconectado
                    _Neptunno_ MODERADOR @SeNSok3R
                    Última edición por

                    With a Raid 0 it is always advisable to have a disk for backups. Moreover, I have already checked that bad shutdowns can cause problems such as losing the data you currently saved. That is to say, you turn on the PC, work/play and the files that were modified/created during that time, if it turns off badly due to a blue screen, you lose them, not always but it can happen quite a few times.

                    Greetings!

                    SeNSok3RS 1 Respuesta Última respuesta Responder Citar 0
                    • SeNSok3RS Desconectado
                      SeNSok3R @_Neptunno_
                      Última edición por

                      yes, I will have backups from now on. This week I had to order from pccomponentes for the hard drive and a couple of other things (taking advantage of the shipping costs :D) thanks for the help. Regards
                      garfieldG 1 Respuesta Última respuesta Responder Citar 0
                      • garfieldG Desconectado
                        garfield Veteranos HL @SeNSok3R
                        Última edición por

                        If the disk is not physically broken and the data is important, you can recover it with Getdata back raid recovery.

                        hlbm signature

                        L 1 Respuesta Última respuesta Responder Citar 0
                        • L Desconectado
                          lameweb @garfield
                          Última edición por

                          ¡Esta publicación está eliminada!
                          ObioneO 1 Respuesta Última respuesta Responder Citar 0
                          • ObioneO Desconectado
                            Obione Veteranos HL @lameweb
                            Última edición por

                            ¡Esta publicación está eliminada!
                            1 Respuesta Última respuesta Responder Citar 0

                            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                            With your input, this post could be even better 💗

                            Registrarse Conectarse
                            • 1 / 1
                            • First post
                              Last post

                            Foreros conectados [Conectados hoy]

                            0 usuarios activos (0 miembros y 0 invitados).
                            febesin, pAtO, vreyes1981

                            Estadísticas de Hardlimit

                            Los hardlimitianos han creado un total de 543.6k posts en 62.9k hilos.
                            Somos un total de 34.9k miembros registrados.
                            delkunaguero1 ha sido nuestro último fichaje.
                            El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.