Intel will solder the microchips to the motherboards

[_Neptunno_]

Well, my opinion is the same as everyone else's, this will at most be in the low range, or low-mid range. The rest will continue to be a matter of being able to change the motherboard and CPU.
Although the constant change in sockets lately... well, what can I say, you almost always end up changing the motherboard when you change the CPU :troll:

Another problem would be with RMA, if the motherboard dies, which statistically is more likely to fail than the CPU, it will always be more costly for companies, I think. Because they will have to either demount the CPU and put it back on the new motherboard, or give you one with a new CPU and that's an additional cost.
Maybe I'm wrong and it doesn't affect them, but... I find it hard to believe that this doesn't pose an economic problem for motherboard manufacturers.

Regards!!

[kynes]

My opinion is that we are four cats, Intel makes money in other market segments, and the advantages in them make it possible for them to compensate for the move. Get used to the idea...

[cobito]

@kynes:

My opinion is that we are four cats, intel makes money in other market segments, and the advantages in them make it possible for them to compensate for the move. Get used to the idea...

It is also possible. Since tablets have become popular, I think the home desktop PC is doomed to die. I have noticed that the vast majority of PC users can do everything they did with the limited functions of a tablet.

The desktop PC will be left only for enthusiasts, gamers, professionals and offices; basically the same ones who used PCs before the Internet boom in the early 2000s.

[packosoft]

my download PCs have the micro soldered xDDD
from what I've read around, they say that using a socket causes limitations when scaling due to the losses produced by the connection between the pins and the micro.
Of course I can already see PCs with the 3 red lights or the yellow ring of the moment because the temperatures have caused the solder to fail and come together…

[Sylver]

@packosoft:

my download PCs have the micro soldered xDDD
from what I've read around, they say that using a socket causes limitations when scaling due to the losses produced by the connection between the pins and the micro.
Of course I can already see PCs with the 3 red lights or the yellow ring of the day because the temperatures have caused the solder to fail and come together…

Well they are baked like XaviJS's graphics and that's it

[fjavi]

It's been a while since the thread, but it seems that Intel will continue to use the LGA socket for a while, the BGA must be for cheaper computers.

Intel will support socket formats in the "foreseeable future"

That is, they will possibly leave only LGA for high-end ranges and BGA for laptops and builder computers, it seems that Haswell could be the last LGA, although they must release something in socket 2011 after Haswell.

regards

[Falkemberg]

mmm but I've read that this was only aimed at computers assembled by assemblers (DELL, HP..etc) and/or equipment sold by intel for companies… that is, for the business sector both large and medium and small businesses... that support would continue to be given to the average user as before but with some types of micro, not all. P.D:....by the way...since 2005 without entering :wall::wall:

[deeiivid]

@Falkemberg:

mmm but I've read that this was only aimed at computers assembled by assemblers (DELL, HP..etc) and/or equipment sold by intel for companies…that is, for the business sector both large and medium and small businesses...that support would continue to be given to the average user as before but with some types of micro, not all.

P.D:....by the way...since 2005 without entering :wall::wall:

But equally this closes a lot of work for those of us who professionally or to make a little money (like me) dedicate ourselves to repairing computers of that type… Or even to give them a second life in the future.

[Wargreymon]

They will only be mid and low ranges, which are supposed to be alternatives, that is, the i7 and i5 will continue to be normal LGA or perhaps they will change them to LC-PGA, and the low-end Pentium and i3 will continue to exist normally in LGA (Pins on the Motherboard) or LC-PGA (Pins on the CPU) and also soldered to boards as an alternative. Perhaps this will stop selling mini-ITX boards as they are sold now and will switch to selling almost all with BGA CPU soldered.

[Falkemberg]

@deeiivid:

But equally, this closes a lot of work for those of us who professionally or to make a little money (like me) dedicate ourselves to repairing computers of that type... Or even to give them a second life in the future.

Well yes... but they have done this like the cars.... you can't even change a headlight without dismantling half the car... so only the workshops could repair (with the subsequent economic anger of the normal user).... well, almost the same thing... only the assemblers could repair their equipment... making a profit from it.