• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Help!!oc AMD Graphics APU A63670k

    Programado Fijo Cerrado Movido Overclock
    9 Mensajes 4 Posters 1.4k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • R Desconectado
      romanoaugustus
      Última edición por

      Hello, I introduce myself, I am new to the forum and I registered with the purpose of obtaining your valuable help for this inconvenience that has me a bit annoyed…

      My pc is as follows:

      AMD APU A6 3670K BLACK EDITION
      ASROCK A55HVS
      2*2 GB 1333MHZ KINGSTON
      DISCO 500 WD SATA III
      FUENTE SAIKANO 500W

      I REQUEST HELP TO OVERCLOCK THE GRAPHICS OF THIS MICRO. I BOUGHT IT JUST FOR ITS EASE OF OVERCLOCKING AND IT TURNS OUT THAT THE DRIVERS DO NOT PROVIDE ME THE OPTION (ONLY THE CPU) AND IN OTHER PROGRAMS (LIKE MSI AFTERBURNER) IT SHOWS ME THAT IT IS AT THE LIMIT (444MHZ) WHEN I UNDERSTOOD THAT THIS IS THE FACTORY VALUE FOR THE CORE OF THE GPU...

      ANYWAY...CAN YOU HELP ME???I WOULD BE EXTREMELY GRATEFUL AND FROM NOW ON MY CONTRIBUTION FOR WHAT YOU NEED, BEST REGARDS! ?

      1 Respuesta Última respuesta Responder Citar 0
      • FranziskanerF Desconectado
        Franziskaner
        Última edición por

        read all of this
        General Rules (updated to 06/08/2009) - HardLimit
        especially point 2.1
        P.D I think this is the second time today that I've included the link to the forum rules, which I recall that when one registers on this forum they are urged to read them, to avoid cases like these.
        greetings
        P.D 2 if you want someone to reply to you, edit the text
        R 1 Respuesta Última respuesta Responder Citar 0
        • R Desconectado
          romanoaugustus @Franziskaner
          Última edición por

          Excuse me "moderator" but if I read the site's policy, as you can see it is written correctly and I do not see any abbreviations or spelling errors, for your part I respect the time and reading of the people in the forum, so I separate paragraphs to make the reading more enjoyable, I expected a collaboration regarding my request and not this observation... I authorize you to delete the post as I will not edit it, I will look for help in another forum, goodbye...

          FranziskanerF 1 Respuesta Última respuesta Responder Citar 0
          • FranziskanerF Desconectado
            Franziskaner @romanoaugustus
            Última edición por

            @romanoaugustus:

            Sorry "moderator" but if I read the site policy, as you can see it is written correctly and I do not see any abbreviations or spelling errors, for your part I respect the time and reading of the people in the forum, so I separate paragraphs to make the reading more enjoyable, I expected some collaboration regarding my request and not this observation… you are authorized to delete the post as I will not edit it, I will look for help in another forum, regards...

            2.1 Spelling
            It is totally forbidden to write as if it were a text message, in capital letters or in alternating capitals. The post will be automatically deleted and the author will be negatively scored in their reputation. It costs nothing to write well and although some spelling mistakes may escape us all, we must try to write correctly, not to change "b" for "v" when it is not correct, the "h", etc.

            I think it is quite clear.
            I am not a moderator, but I think I have explained it to you in a good way.
            As a rule, in this forum people do not respond to any post that infringes the rules, that is why I indicated that you edit it (but you can do whatever you like, if you think it is better to ask in another forum….. you decide)

            defaultuserD 1 Respuesta Última respuesta Responder Citar 0
            • defaultuserD Desconectado
              defaultuser Veteranos HL @Franziskaner
              Última edición por

              And a little patience is also needed romanoaugustus, I had already seen the post and was waiting for you to contribute a little before opening my mouth, and like me there were probably more than one (including Franziskaner, who by the way is not a moderator, just a "reasonable" registered user who behaves correctly).

              It's a shame that you lasted so little in the forum, but well welcome (and goodbye if that's how you feel).

              Oh and by the way, writing in all caps on the internet is equivalent to shouting, so as you can see it's not just a matter of forums or even this forum, that is to say, that in that other forum to which you go to ask for help, if you ask in all caps you will also be "shouting orthographically".

              Good luck and bye for now.

              Ryzen 5 3600 - Tuf B550 pro - 2x 8g 3600c18 - Strix rtx 2060 - M2 1TB

              FranziskanerF 1 Respuesta Última respuesta Responder Citar 0
              • FranziskanerF Desconectado
                Franziskaner @defaultuser
                Última edición por

                @defaultuser:

                And a little patience is also needed romanoaugustus, I had already seen the post and was waiting for you to contribute a little before opening my mouth, and like me there were probably others (including Franziskaner, who by the way is not a moderator, just a "reasonable" registered user who behaves correctly).

                It's a shame you didn't last long on the forum, but well welcome (and goodbye if that's how you feel).

                Oh and by the way, writing in all caps on the Internet is equivalent to shouting, so as you can see it's not just a matter of forums or even this forum, that is, that in that other forum where you go to ask for help, if you ask in all caps you will also be "shouting orthographically".

                Good luck and bye for now.

                hostis …. thanks for the "reasonable" :ugly: I think that's what I said when I said you weren't a moderator ;D but well, you've had this forum for many years and many people have passed through it, some with more pain than glory and others with more glory than pain (and the pain is that you're no longer on this forum :eoh: ) (and I suppose that the moderately intelligent know who I'm talking about ? that was a hint )
                greetings to all forum members, happy new year's eve prosperous new year and........ all those things that are said and wished ;D

                defaultuserD 1 Respuesta Última respuesta Responder Citar 0
                • defaultuserD Desconectado
                  defaultuser Veteranos HL @Franziskaner
                  Última edición por

                  Man, the "raso" thing was to make it clear that you were not using any kind of power. For the rest, for me the value of a forum member is earned by their conduct, whether they are "registered", "veteran" or "boardmaster" ?

                  Happy New Year forum members.

                  Ryzen 5 3600 - Tuf B550 pro - 2x 8g 3600c18 - Strix rtx 2060 - M2 1TB

                  FranziskanerF 1 Respuesta Última respuesta Responder Citar 0
                  • FranziskanerF Desconectado
                    Franziskaner @defaultuser
                    Última edición por

                    post na ? ? happy new year

                    ferelxyxF 1 Respuesta Última respuesta Responder Citar 0
                    • ferelxyxF Desconectado
                      ferelxyx Veteranos HL @Franziskaner
                      Última edición por

                      well, to clarify the issue, the graphics only go up if you increase the FSB
                      if you only increase the multiplier, the processor does it alone

                      clarified for possible questions about those micros

                      P.D.: if you felt offended by the comment about the writing, you lose it

                      regards

                      1 Respuesta Última respuesta Responder Citar 0
                      • 1 / 1
                      • First post
                        Last post

                      Foreros conectados [Conectados hoy]

                      0 usuarios activos (0 miembros y 0 invitados).
                      febesin, pAtO,

                      Estadísticas de Hardlimit

                      Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
                      Somos un total de 34.9k miembros registrados.
                      roymendez ha sido nuestro último fichaje.
                      El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.