• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Can you help me choose between these graphics? Mid-range for old PC

    Programado Fijo Cerrado Movido Tarjetas Gráficas
    36 Mensajes 14 Posters 6.5k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • FranziskanerF Desconectado
      Franziskaner @phrono
      Última edición por

      hello
      well man....
      the PSU is clearly not a marvel, however, after searching and seeing, I found that there are two models, one with active PFC and another with passive PFC, if it would be the one with active PFC, "it works"
      but it is almost safer to think about doing without that PSU and looking for something of quality.
      the CPU.
      you will notice some gain in games and more if you upgrade the graphics (it would be almost essential),
      burn it? yes if you want, ;D if you do a gentle OC it's fine (it slightly shortens the lifespan)
      in this same forum in the Overclock section you will find several guides:
      http://foro.hardlimit.com/f-overclock-4.html/
      socket quite rare? no, old and outdated ;D
      changing the CPU... it is an option but it is linked to a graphics card in good condition (for gaming), if you have a lot of CPU and little graphics card it's bad, if you have a lot of graphics card and little CPU it's less bad than the first.
      what I would do (to make it as least traumatic as possible)
      1º change the PSU
      2º save a little
      3º GTX 660 OC
      4º OC your current CPU (a little and to learn)
      5º buy a cooler for the CPU (that is decent)
      6º upgrade the CPU (and OC it)
      you could also skip everything and buy the 660 OC directly, but if your PSU "dies" it may take down one or several components of your computer, and I don't think you would like to burn 170 euros
      regards

      F 1 Respuesta Última respuesta Responder Citar 0
      • F Desconectado
        fjavi @Franziskaner
        Última edición por

        For me, what can most limit the OC is the motherboard. That micro on a more overclocking motherboard can go up well and should be noticeable, although perhaps on your motherboard you can get 3200 or 3400 MHz very easily, although with that power supply you can't really overclock it.

        http://assets.overclock.net.s3.amazonaws.com/7/7e/7e0b24ce_vbattach79691.jpeg

        But the processor is not so bad for being a dual.

        Before I change the micro, I would put the graphics card to see how it goes and before I would change the power supply, which is always a better and more lasting investment, besides that it could overclock that micro a little better.

        It's just that a Q6600 consumes more, that power supply, although it says those watts, I doubt they are real, I wouldn't put a quad without changing the power supply, I prefer the dual that consumes less.

        The 660 doesn't consume much and here NVIDIA recommends a 450W power supply, although it will be a quality power supply. But you should already be thinking about a 4-core CPU

        http://www.nvidia.es/object/geforce-gtx-660-es.html#pdpContent=2

        greetings

        whoololonW 1 Respuesta Última respuesta Responder Citar 0
        • whoololonW Desconectado
          whoololon Veteranos HL @fjavi
          Última edición por

          The worst part is that you get hot, which almost always happens. ?
          You're talking about upgrading an "old" computer, so for that you only change the graphics and font.
          Buying a powerful graphics card, even if you don't get the most out of it with your current setup, can be seen as an investment, as you can use it when you change the card.
          To finish, it's also not illegal to lower the resolution and detail in games, but I suppose that's a matter of personal preference. ?

          ...me lo dicen las voces...

          hlbm signature

          Bm4nB 1 Respuesta Última respuesta Responder Citar 0
          • Bm4nB Desconectado
            Bm4n @whoololon
            Última edición por

            @whoololon:

            To finish, it is also not illegal to lower the resolution and detail in games, but I suppose that is a matter of personal opinion. ?

            As if not, that is a sin!!! :ugly:

            Don't worry about the power consumption either because it's a card that doesn't consume much, we're talking about just over 300W for a complete system, and as fjavi said, if what you need is the card, it's the first thing you should look at and then you'll see if you need to make more changes. For example, if you see that the CPU is always at 100% in games, or that the power supply gets very hot, you can think about changing it, but if it's enough for what you have, you don't need to.

            hlbm signature
            ↳ Mis componentes

            gamingpyG 1 Respuesta Última respuesta Responder Citar 0
            • gamingpyG Desconectado
              gamingpy @Bm4n
              Última edición por

              I would go for a better power supply more or less like this Cooler Master 600w and a graphics card with a gtx 660, I liked the comment from amd125 with one of 2 gb both would go very well thinking about a future where games consume more than 1GB in medium quality it would be a good investment
              amd125A 1 Respuesta Última respuesta Responder Citar 0
              • amd125A Desconectado
                amd125 Veteranos HL @gamingpy
                Última edición por

                I would be a bit scared to put a new fairly powerful graphics card in that power supply. If the power supply is not of good quality, your PC will restart when you play, or if you are unlucky, it will crash and could break a component due to a voltage surge. I say this with some basis, as I have seen friends' PCs with graphics cards broken due to a bad power supply. Otherwise, I would save a little more in your place, and when you could, buy a decent power supply that will serve you for the future and for when you change platforms, and a graphics card like the one indicated to you. That within X time you see that it is going badly? Probably it will be more a matter of micro than anything else. So look for a second-hand micro as I indicated. I know it may seem like a hassle, but first try to overclock the micro. There are many guides, look for them on the forum, YouTube etc. and I have seen that your motherboard can increase the Vcore of the micro and the FSB. Now you don't know what this is, but with time and reading you will know that they are two fundamental parameters for overclocking the micro so don't worry. In current micros, overclocking is generally simple up to some parameters. In micros like yours, you had to "play" a little more but you got the same result. But changing the micro would be if you get as I say a Q6600 for example or similar for 50€ or so. I wouldn't spend much more on that platform. Then I would sell your micro and the change would have cost you 25-30€. I think it is worth it for that money.
                gamingpyG 1 Respuesta Última respuesta Responder Citar 0
                • gamingpyG Desconectado
                  gamingpy @amd125
                  Última edición por

                  It's true I had forgotten about the processor you have that limits it a lot :ugly:

                  phronoP 1 Respuesta Última respuesta Responder Citar 0
                  • phronoP Desconectado
                    phrono @gamingpy
                    Última edición por

                    Well; I think in the end I'm going to opt for the option of spending a little more, buy a reliable power supply and the GTX 660.

                    After assembling it and testing how the PC goes with the new components, and knowing that the power supply has the adequate margin, I will put a handsome heatsink and start messing around with the OC (after reading a lot ;D) and see how things go.

                    I see this as an investment: if in the near future I change the equipment, then two components less that I have to get…

                    Many thanks to everyone, your opinions have been very useful to me, although I don't understand half of the terms :ugly: Now I'm going to get down to reading about OC to see if I'm able to get more out of my E8200.

                    Greetings, thank you very much to everyone

                    amd125A 1 Respuesta Última respuesta Responder Citar 0
                    • amd125A Desconectado
                      amd125 Veteranos HL @phrono
                      Última edición por

                      If you need help to OC the micro you already know where to find us.

                      But roughly speaking :ugly: FSB you put it at 400 therefore the speed will be 400*8=3200

                      You have to raise the Voltage to the micro little by little until it starts, with 1.350 it should start but I think that if it is moderately good with less you will raise it to 3200

                      At the most do this, and if it starts pass it some stress test and control the temperatures.

                      Each micro is a world, some go up like foam and others are lazy, but I tell you that 3000-3200 you have to do it easy.

                      Anyway open a post and we will indicate you.

                      ChinoC 1 Respuesta Última respuesta Responder Citar 0
                      • ChinoC Desconectado
                        Chino @amd125
                        Última edición por

                        Forgive my intrusion in the post but I often find myself daydreaming when it comes to power supplies.
                        In my signature rig I have an i7 3770k @4.5ghz on an asrock z77 extreme with an hd 7950 @1000/1400, 4 SATA hard drives, 1 SSD, DVD burner, 5 12cm fans with led, 2 8cm fans with led, fan controller and card reader.
                        All of this is powered by a 500W LC Power that cost me 29€, I have a feeling that with yours of 520W it will be more than enough.
                        My opinion.

                        hlbm signature

                        ObioneO amd125A 2 Respuestas Última respuesta Responder Citar 0
                        • ObioneO Desconectado
                          Obione Veteranos HL @Chino
                          Última edición por

                          How brave of you (not to mention reckless, without wanting to be disrespectful). You spend about €1,000 on the equipment, OverClockeas to the fullest and skimp on one of the most important components :facepalm:

                          4.5GHz with an EVO is not that you are overdoing it. What temperatures do you have under full load? Either you got a very good micro or it will be quite hot.

                          Fractal Design Define R4 - 4 x Servo Gentle Typhoon - Be Quiet SilentWings USC 140 - BitFenix Formula Gold 550W - Asus Crosshair VI Hero - AMD Ryzen 5 3600 - Thermalright Macho Rev.B - 2x8GB Crucial Ballistix Sport AT 3200 - MSI GTX 1070 Gaming X - Corsair MP510 480GB - Seagate 7200.14 1TB - Yamaha HS 7 ♫ ASUS Xonar DGX ♫ Beyer Dynamic MMX-300 - LG 23MP57VQ-P - Oculus Rift CV1 - Logitech G27 - Zalem V2

                          SylverS 1 Respuesta Última respuesta Responder Citar 0
                          • amd125A Desconectado
                            amd125 Veteranos HL @Chino
                            Última edición por

                            @Chino:

                            Forgive my intrusion in the post but many times I find myself daydreaming when we talk about power supplies.
                            In my signature rig I have an i7 3770k @4.5ghz on an asrock z77 extreme with an hd 7950 @1000/1400, 4 SATA hard drives, 1 SSD, DVD burner, 5 12cm fans with led, 2 8cm fans with led, fan controller and card reader.
                            All of this is powered by a 500W LC Power that cost me 29€, I have a feeling that with your 520W one it will be more than enough.
                            My opinion.

                            From my experience, the power supply should be of quality whenever possible. I have seen many PCs with a blown power supply that unfortunately takes out the graphics card or other components. You can put in slow memory, a slow CPU, a bad graphics card… but not a bad power supply, because it can break your entire system.

                            I understand having a low cost PC, slow for office work with a cheap power supply. Well, I respect that more than understanding it. But not having a PC for other more powerful applications. You really don't need a 100€ power supply for a computer, depending on the components, but sometimes the difference between a bad Chinese power supply of 15-20€ and a more normal brand one of 35-40€ is worth it, even for a basic PC, I wouldn't put an unknown brand power supply.

                            There are brands like NOX that are not very expensive and are of quality, without having to buy more expensive brands and you can afford to have a nice power supply for not much money.

                            1 Respuesta Última respuesta Responder Citar 0
                            • SylverS Desconectado
                              Sylver Veteranos HL @Obione
                              Última edición por

                              @Obione:

                              You must be brave too (not to say reckless, without wanting to be disrespectful). You spend about €1,000 on the equipment, overclock it well and skimp on one of the most important components :facepalm:

                              4.5GHz with an EVO is not that you are overdoing it. What temperatures do you have under full load? Either you got a very good micro or it will be quite hot.

                              +1

                              Putting a €29 power supply in a €1000 equipment... It's a real facepalm :facepalm: that takes guts, and above all, little idea.

                              I am the one who has a TX650 in a mid/high range equipment and I am worried that when I overclock everything it will be insufficient...

                              Regards

                              >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
                              >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
                              >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

                              ChinoC 1 Respuesta Última respuesta Responder Citar 0
                              • ChinoC Desconectado
                                Chino @Sylver
                                Última edición por

                                This post is being processed/translated. The original version will be shown:

                                Pues el evo se defiende bastante bien este veranono creo que haya pasado de 59ºC.
                                Creo que os confundis con la paranoia de los watios.
                                LCPower fabrica unas fuentes de muy buena calidad y segun mis calculos (y los de otros) mi equipo no debe consumir mas de 400W a plena carga, me sobran 100W.
                                La fuente nunca le he notado un apice de calor.
                                Ademas la prueba mas evidente es que lleva casi un año trabajando en estas condiciones.
                                Pero la cosa no acaba aqui, sino que antes estaba tirando de la misma grafica pero con una 970 extreme4 y un phenom 955BE overclockeado tb, que como sabreis es de 125W, en vez de 77W como lo es el i7.
                                Llamarlo locura, insensatez, pasotismo o como lo querais llamar, pero la prueba irrefutable es que esta funcionando a la perfeccion desde el primer dia. Que vosotros os quedais mas tranquilos gastando 100€ o mas en una fuente de mejor calidad, vuestro dinero es, pero no digais que no tira, que es necesario. Evidentemente la fuente de mas watios trabajara mas sobrada.
                                Lo que si es cierto es que coges en una mano la LCpower de "solo" 500W y una nox urano de 750W, y lo primero que se te viene a la mente es que la nox es de los chinos. La LC power estan mucho mejor fabricadas tanto en chapa como en cables, como en componentes. El que sepa un poquito de electronica podra confirmarlo.
                                En cuanto a tensiones, pues despues de mas de 2 años de funcionamiento intenso, estos son sus valores:
                                En reposo:
                                12V –->12.119V
                                5V ----->5.064V
                                3.3V--->3.296v

                                A plena carga:
                                12V ---> 11.986V
                                5V ---> 5.088V
                                3.3V ---> 3.280v

                                Clavadas!!!!!
                                No me hace falta mas fuente.
                                Salu2.

                                hlbm signature

                                SylverS FassouF 2 Respuestas Última respuesta Responder Citar 0
                                • SylverS Desconectado
                                  Sylver Veteranos HL @Chino
                                  Última edición por

                                  This post is being processed/translated. The original version will be shown:

                                  Vale amigo, ahora mira el amperaje de la línea de +12V de tu fuente y a ver cuánto entrega realmente esa fuente de "500W"…

                                  >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
                                  >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
                                  >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

                                  ChinoC 1 Respuesta Última respuesta Responder Citar 0
                                  • ChinoC Desconectado
                                    Chino @Sylver
                                    Última edición por

                                    This post is being processed/translated. The original version will be shown:

                                    30A
                                    Cuando a una fuente de alimentacion se le exigen mas amperios de los que puede entregar lo primero que le pasa es que empieza a caer la tension. ¿Ves que le pase eso a la mia? No, ¿verdad?
                                    La fuente va bien.
                                    O acaso me estas intentando convencer que mi ordenador no funciona o lo hace de milagro!!!!
                                    Salu2.

                                    hlbm signature

                                    SylverS 1 Respuesta Última respuesta Responder Citar 0
                                    • SylverS Desconectado
                                      Sylver Veteranos HL @Chino
                                      Última edición por

                                      This post is being processed/translated. The original version will be shown:

                                      Yo no te intento convencer de nada. Tu fuente entrega 360W en la línea de +12V, así que espero que no llegue nunca a consumir esos 400W que calculabas sólo en esa línea, porque ya te puedes imaginar lo que sucedería si eso pasara.

                                      Saludos

                                      >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
                                      >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
                                      >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

                                      ChinoC 1 Respuesta Última respuesta Responder Citar 0
                                      • FassouF Desconectado
                                        Fassou MODERADOR @Chino
                                        Última edición por

                                        This post is being processed/translated. The original version will be shown:

                                        Las Nox Urano no son nada del otro mundo, y existen marcas baratas con modelos decentes, en tu caso LC Power son alemanes y no lo hacen mal. Ej : LC Power LC500H-12

                                        Es cierto que por el peso te puedes orientar sobre la calidad de una fuente.

                                        Sobre los micros, el TDP (Thermal Design Power) delata a los procesadores que consumen más, pero es un valor que indica la disipación en watios, que no el consumo.

                                        Salu2!

                                        Intel i5 3570k / ASRock Z77 Extreme 4 / G.Skill F3-12800CL9D-8GBRL / Sapphire HD5850 / Samsung HD103UJ / TR TrueSpirit / NZXT Source 210 / OCZ ZS550W
                                        Intel i5 4570 / ASRock H87 Pro 4 / 2x G.Skill F3-14900CL8-4GBXM / Samsung 850 EVO 250Gb + ST1000DM003 + ST2000DM003 + HGST HDS723020BLA642 + Maxtor 6V250F0 / CM Seidon 240M / Zalman MS800 / CM MWE 550
                                        AMD Ryzen 7 1800X / B350 / 2x8GB Samsung DDR4-2400 CL17 / NVIDIA GTX 1070 8GB / SSD 120GB + ST4000DM004 + ST6000DM003 / EVGA Supernova 650 G2

                                        hlbm signature

                                        ChinoC whoololonW Kernel1.0K 3 Respuestas Última respuesta Responder Citar 0
                                        • ChinoC Desconectado
                                          Chino @Fassou
                                          Última edición por

                                          This post is being processed/translated. The original version will be shown:

                                          @Fassou:

                                          Las Nox Urano no son nada del otro mundo, y existen marcas baratas con modelos decentes, en tu caso LC Power son alemanes y no lo hacen mal. Ej : LC Power LC500H-12

                                          Es cierto que por el peso te puedes orientar sobre la calidad de una fuente.

                                          Sobre los micros, el TDP (Thermal Design Power) delata a los procesadores que consumen más, pero es un valor que indica la disipación en watios, que no el consumo.

                                          Salu2!

                                          Sobre el TDP lo se, pero es una especie de "regla de tres", mas o menos.

                                          hlbm signature

                                          1 Respuesta Última respuesta Responder Citar 0
                                          • whoololonW Desconectado
                                            whoololon Veteranos HL @Fassou
                                            Última edición por

                                            This post is being processed/translated. The original version will be shown:

                                            A mí, los hilos donde hay toma y daca me gustan bastante, entretienen mucho y dan vidilla al foro. Dicho ésto, personalmente tengo claras tres cosas:
                                            La primera, que si para mí lo mío es lo más mejor, porque me va bien y me lo demuestra día a día, pues no me van a convencer de otra cosa.
                                            La segunda, que a veces se olvida que quienes responden a los hilos, lo hacen con la mejor intención, con el sólo ánimo de ayudar y sin estar patrocinados por los fabricantes que, eventualmente, se recomiendan.
                                            Y la tercera cosa que tengo más que clara, es que odio las Oreo.
                                            ;D

                                            Edito: ¿Esto no iba de gráficas?

                                            ...me lo dicen las voces...

                                            hlbm signature

                                            ChinoC 1 Respuesta Última respuesta Responder Citar 0
                                            • 1
                                            • 2
                                            • 1 / 2
                                            • First post
                                              Last post

                                            Foreros conectados [Conectados hoy]

                                            0 usuarios activos (0 miembros y 0 invitados).
                                            febesin, pAtO, HIAL-9000

                                            Estadísticas de Hardlimit

                                            Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
                                            Somos un total de 34.9k miembros registrados.
                                            roymendez ha sido nuestro último fichaje.
                                            El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.