I would run the MEMtest +86 and also check these links …

Solved BSOD - Windows 7 x64 nvlddmkm.sys + dxgkrnl.sys + dxgmms1.sys - Windows 7 Forums

Haha, you see it! The oven never fails! :risitas:

I'm glad it helped you. Now you're probably explaining to your friends that you fixed the graphics by putting it in the oven and they're going to be amazed xD.

Best regards!

Thanks for responding
The thing about the plate being gen3 or not, I didn't know it, thanks for telling me;D, regarding the ram zero quw sifo.xon the same and regarding the disk I have found one of 1.5tb caviar green that is verybiwn priced and then I will buy the ssd which I hope will come down a bit. By the way, has any of you ever ordered from amazon uk? If so, I have some questions

Pd: I have written all this with my mobile so I couldn't write the accents:nono:

Thank you very much for responding so quickly.
I also have a question about the motherboard I have now, the asrock g31m-gs r2.0, which I bought a few months ago and now it turns out that when I installed w7 and after a few days of using it, the graphics card failed, then I tried to install ubuntu and the same thing happened, the failure was at the beginning when the loading screen of windows and ubuntu got stuck and the logo was almost invisible
and now when I start it up, the screen doesn't react and the speaker doesn't beep.
See if you can help me.

Thanks in advance

@pablotombi: Las CL7 de la misma marca salen a 1€ mas mira: estas son las Cl9 G.Skill Ripjaws DDR3 1600 PC3-12800 8GB 2x4GB CL9 F3-12800CL9D-8GBRL Memoria DDR3 y estas las CL7 G.Skill Ripjaws X DDR3 1333 PC3-10666 8GB 2x4GB CL7 F3-10666CL7D-8GBXH Memoria DDR3 Edito: Lo que habia dicho antes , salen mas o menos por el mismo precio No son las mismas memorias, las CL9 son DDR3 a 1600 Mhz y las CL7 son DDR3 a 1333 Mhz. Estas si son 1600 Mhz. CL7 por poner un ejemplo. ALTERNATE - HARDWARE - Módulos de memoria - DDR3 - DDR3-1600 - G.Skill Kit DIMM 4 GB DDR3-1600 Un saludo

Gracias , lo tendre en cuenta

es por que tengo pensado ponerle al ordenador un giga de ram mas y con la que tengo tendría que quitar una de un giga para ponerle otra de 2 y con la del punto limpio solo tendria que ponerle una de 1