Como configurar lirc

[l3g0r]

He echo un receptor de infrarojos , que ya me funciona en windows.Pero en linux no consigo configurarlo.

en /etc/lircd.cof he puesto esto:(para el mando philips sbc ru520)

brand: Philips

model: SBC RU 520

supported devices: TV, VCR

contributed by: Maarten ter Huurne

This is a remote control in the SBC RU 500 series:

SBC RU 510 supports 1 device (TV)

SBC RU 520 supports 2 devices (TV, VCR)

SBC RU 530 supports 3 devices (TV, VCR, SAT)

SBC RU 540 supports 4 devices (TV, VCR, SAT, DVD)

Since I have a 520, only the TV and VCR keys are in this config file.

The 5x0 models are black, there are also 5x5 models in silver.

This remote is reprogrammable; the configuration below is for the default

configuration. The remote's manual tells you how to restore the default

configuration if necessary.

The volume +/- and mute are always sent to the TV, regardless of the

current mode. The remote does not send some keys at all in some modes,

for example the record button does nothing in TV mode. You can see

whether a button is sent or not by looking at the mode selection led,

which flashes every time a button is sent.

You can find images and the manual of this remote here:

http://www.ce.philips.com/

Direct link: (not sure this will continue to work)

http://www.ce.philips.com/global/b2c/ce/catalog/product.jhtml?divId=0&groupId=CONVENIENCE&catId=SOUNDANDVISIONACCESSORIES_CAT&subCatId=UNIVERSALREMOTECONTROLS&productId=SBCRU520_00

Note: I copied the timing settings from the "sbc-rp420" config file,

which was contributed by Thomas Betker.

The irrecord tool was unable to figure the timing settings out,

probably because the Hauppauge analog TV card I use (lirc_i2c

driver) does most of the decoding internally.

I also kept the key naming as close to "sbc-rp420" as possible.

begin remote

name Philips/SBC-RU-520
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100

one 932 847
zero 932 847
plead 976
gap 113935

irrecord found:

gap 199995

toggle_bit 2

begin codes

regular TV codes:

tv/standby 0x000000000000100C
tv/text 0x000000000000103C
tv/tt.suspend 0x0000000000001029
tv/tt.enlarge 0x000000000000102B
tv/select 0x000000000000103F
tv/mute 0x000000000000100D
tv/ext 0x0000000000001038
tv/program+ 0x0000000000001020
tv/program- 0x0000000000001021
tv/volume+ 0x0000000000001010
tv/volume- 0x0000000000001011
tv/menu 0x0000000000000012
tv/ok 0x0000000000000017
tv/1 0x0000000000001001
tv/2 0x0000000000001002
tv/3 0x0000000000001003
tv/4 0x0000000000001004
tv/5 0x0000000000001005
tv/6 0x0000000000001006
tv/7 0x0000000000001007
tv/8 0x0000000000001008
tv/9 0x0000000000001009
tv/0 0x0000000000001000
tv/digits 0x000000000000100A
tv/red 0x000000000000002B
tv/green 0x000000000000002C
tv/yellow 0x000000000000002D
tv/blue 0x000000000000002E
tv/grey 0x000000000000002F

shift TV codes:

tv/smute 0x0000000000001023
tv/sext 0x000000000000100F
tv/sprogram+ 0x0000000000000010
tv/sprogram- 0x0000000000000011
tv/svol+ 0x0000000000000016
tv/svol- 0x0000000000000015
tv/smenu 0x000000000000003A
tv/sok 0x000000000000100F
tv/s1 0x000000000000100E
tv/s2 0x000000000000102E
tv/s3 0x000000000000102A
tv/s4 0x000000000000102D
tv/s5 0x000000000000101D
tv/s6 0x0000000000000018
tv/s7 0x000000000000000E
tv/s8 0x000000000000003E
tv/s9 0x000000000000000D
tv/s0 0x0000000000001022
tv/sdigits 0x000000000000100B

regular VCR codes:

vcr/standby 0x000000000000114C
vcr/text 0x000000000000117C
vcr/tt.suspend 0x000000000000115D
vcr/tt.enlarge 0x0000000000000145
vcr/select 0x000000000000114F
vcr/ext 0x0000000000001178
vcr/program+ 0x0000000000001160
vcr/program- 0x0000000000001161
vcr/menu 0x0000000000000152
vcr/ok 0x0000000000000157
vcr/1 0x0000000000001141
vcr/2 0x0000000000001142
vcr/3 0x0000000000001143
vcr/4 0x0000000000001144
vcr/5 0x0000000000001145
vcr/6 0x0000000000001146
vcr/7 0x0000000000001147
vcr/8 0x0000000000001148
vcr/9 0x0000000000001149
vcr/0 0x0000000000001140
vcr/digits 0x000000000000114A
vcr/backward 0x0000000000001172
vcr/stop 0x0000000000001176
vcr/pause 0x0000000000001170
vcr/forward 0x0000000000001174
vcr/play 0x0000000000001175
vcr/record 0x0000000000001177

shift VCR codes:

vcr/stext 0x000000000000117D
vcr/stt.suspend 0x000000000000114B
vcr/stt.enlarge 0x000000000000117A
vcr/sdisplay 0x0000000000001171
vcr/sprogram+ 0x0000000000000150
vcr/sprogram- 0x0000000000000151
vcr/svol- 0x0000000000000155
vcr/svol+ 0x0000000000000156
vcr/smenu 0x0000000000000153
vcr/sok 0x000000000000017D
vcr/s1 0x000000000000114E
vcr/s2 0x0000000000000149
vcr/s3 0x0000000000000148
vcr/sbackward 0x0000000000001165
vcr/sstop 0x0000000000000171
vcr/spause 0x0000000000001169
vcr/sforward 0x0000000000001166
vcr/splay 0x0000000000000170
end codes

end remote

y si sigo los comandos que pone en la pagina oficial de lirc me pone esto:

bash-2.05b# irw
connect: Connection refused
bash-2.05b# chmod 666 /dev/lircd
bash-2.05b# irw
connect: Connection refused
bash-2.05b# mode2
This program is only intended for receivers supporting the pulse/space layer.
Note that this is no error, but this program simply makes no sense for your
receiver.
In order to test your setup run lircd with the –nodaemon option and
then check if the remote works with the irw tool.

sabeis que archivo me falta configurar? yo creo que tengo ke configurar el receptor que esta conectado al com1, pero eso donde se pone?:rolleyes:

Un saludo y gracias.

[l3g0r]

:susto: no sabe nadie?:rolleyes: