Nuevos drivers nforce!!


  • 0

    Parece que hay nuevos drivers link alguien lo a probado?download

    Audio Control Panel
    A control panel application is included with the audio driver to control the features of the nForce audio driver. These features include:

    • Speaker setup
    • Master volume control
    • Per channel volume control / mute
    • Input source selection
    • Analog and digital output control

    The audio control panel may be invoked by typing "nvpanel" at the command line:

    example% nvpanel

    el panel ese nuevo, parece que tiene buena pinta.

    con que driver ba mejor?este o ALSA el ke trae el nuevo kernel?

    Tambien hay otro driver para la targeta de red, http://www.hailfinger.org/carldani/linux/patches/forcedeth/

    this is forcedeth: A new driver for the ethernet interface of the
    NVIDIA nForce chipset, licensed under GPL.

    The driver was written without support from NVIDIA, it's the result of
    a cleanroom development:
    Carl-Daniel and Andrew reverse engineered the nvnet driver and wrote a
    specification, Manfred wrote the driver based on the spec. Carl-Daniel
    fitted some compat glue to get it to compile under 2.4 and debugged
    some nForce3 issues.

    This release is intended for experienced users, it's beta quality:
    normal network traffic should work, although only at ~80% speed due to
    incomplete interrupt handling (we suspect a hardware bug).
    We'd appreciate TX throughput measurements.

    We received success reports for nForce, nForce2 and nForce3 systems.

    Un saludo.



  • 1

    Acabo de probar el driver FORCEDETH. Y funcionar funcionar funciona….pero no me carga la configuracion(ip,gateway..)
    Tengo que poner todo cada vez que inicio...ifconfig eth0...

    El archivo de configuracion esta bien el /etc/conf.d/net esta como antes y ahora no ba. Porque no coje esa configuracion y tengo que ponerlo manualmente?

    Un saludo y gracias.



  • 2

    rc-update add nvnet default :rolleyes:

    Creo que es esto, yo lo tuve que hacer para k me cargase el modulo al iniciar…

    Salu2!



  • 3

    el driver no esta compilado como modulo…:nono: aun asi..

    (root@/home/l3g0r) rc-update add forcedeth default

    • /sbin/rc-update: /etc/init.d/forcedeth not found; aborting.

    El driver ya se carga, lo que no se carga es la configuracion.

    (root@/home/l3g0r) dmesg init | grep forcedeth
    forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.19.
    eth0: forcedeth.c: subsystem: 01695:1000

    y el driver de audio el nuevo tampoco ba…tendre ke poner el Alsa

    (root@/usr/src/nforce/nvaudio) make
    make nvaudio.o
    make[1]: Entering directory /usr/src/nforce/nvaudio' gcc -D__KERNEL__ -I/lib/modules/2.6.0-gentoo/build/include -Wall -Wstrict-prototypes -O -fno-strict-aliasing -mpreferred-stack-boundary=2 -march=i686 -falign-functions=4 -DMODULE -DDRIVERVER=\"9999\" -DREMAP_NEW -c -o nvhw.o nvhw.c En el fichero incluído de /lib/modules/2.6.0-gentoo/build/include/asm/smp.h:18, de /lib/modules/2.6.0-gentoo/build/include/linux/smp.h:17, de /lib/modules/2.6.0-gentoo/build/include/linux/sched.h:23, de /lib/modules/2.6.0-gentoo/build/include/linux/module.h:10, de nvhw.c:12: /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:6:25: mach_mpspec.h: No existe el fichero o el directorio In file included from /lib/modules/2.6.0-gentoo/build/include/asm/smp.h:18, from /lib/modules/2.6.0-gentoo/build/include/linux/smp.h:17, from /lib/modules/2.6.0-gentoo/build/include/linux/sched.h:23, from /lib/modules/2.6.0-gentoo/build/include/linux/module.h:10, from nvhw.c:12: /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:8: error:MAX_MP_BUSSES' undeclared here (not in a function)
    /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:9: error: MAX_MP_BUSSES' undeclared here (not in a function) /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:10: error:MAX_MP_BUSSES' undeclared here (not in a function)
    /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:12: error: MAX_MP_BUSSES' undeclared here (not in a function) /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:19: error:MAX_APICS' undeclared here (not in a function)
    /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:20: error: MAX_MP_BUSSES' undeclared here (not in a function) /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:20: error: conflicting types formp_bus_id_to_type'
    /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:8: error: previous declaration of mp_bus_id_to_type' /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:22: error:MAX_IRQ_SOURCES' undeclared here (not in a function)
    /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:24: error: MAX_MP_BUSSES' undeclared here (not in a function) /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:24: error: conflicting types formp_bus_id_to_pci_bus'
    /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:12: error: previous declaration of mp_bus_id_to_pci_bus' /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:54: error:MAX_APICS' undeclared here (not in a function)
    In file included from /lib/modules/2.6.0-gentoo/build/include/asm/smp.h:20,
    from /lib/modules/2.6.0-gentoo/build/include/linux/smp.h:17,
    from /lib/modules/2.6.0-gentoo/build/include/linux/sched.h:23,
    from /lib/modules/2.6.0-gentoo/build/include/linux/module.h:10, from nvhw.c:12:
    /lib/modules/2.6.0-gentoo/build/include/asm/io_apic.h:120: error: MAX_IRQ_SOURCES' undeclared here (not in a function) /lib/modules/2.6.0-gentoo/build/include/asm/io_apic.h:120: error: conflicting types formp_irqs'
    /lib/modules/2.6.0-gentoo/build/include/asm/mpspec.h:22: error: previous declaration of mp_irqs' En el fichero incluído de /lib/modules/2.6.0-gentoo/build/include/linux/smp.h:17, de /lib/modules/2.6.0-gentoo/build/include/linux/sched.h:23, de /lib/modules/2.6.0-gentoo/build/include/linux/module.h:10, de nvhw.c:12: /lib/modules/2.6.0-gentoo/build/include/asm/smp.h:73:26: mach_apicdef.h: No existe el fichero o el directorio In file included from /lib/modules/2.6.0-gentoo/build/include/linux/smp.h:17, from /lib/modules/2.6.0-gentoo/build/include/linux/sched.h:23, from /lib/modules/2.6.0-gentoo/build/include/linux/module.h:10, from nvhw.c:12: /lib/modules/2.6.0-gentoo/build/include/asm/smp.h: En la funciónhard_smp_processor_id':
    /lib/modules/2.6.0-gentoo/build/include/asm/smp.h:77: aviso: implicit declaration of function GET_APIC_ID' En el fichero incluído de /lib/modules/2.6.0-gentoo/build/include/linux/irq.h:20, de /lib/modules/2.6.0-gentoo/build/include/asm/hardirq.h:6, de nvhw.h:31, de nvhw.c:16: /lib/modules/2.6.0-gentoo/build/include/asm/irq.h:16:25: irq_vectors.h: No existe el fichero o el directorio In file included from /lib/modules/2.6.0-gentoo/build/include/asm/hardirq.h:6, from nvhw.h:31, from nvhw.c:16: /lib/modules/2.6.0-gentoo/build/include/linux/irq.h: En el nivel principal: /lib/modules/2.6.0-gentoo/build/include/linux/irq.h:70: error:NR_IRQS' undeclared here (not in a function)
    In file included from /lib/modules/2.6.0-gentoo/build/include/linux/irq.h:72,
    from /lib/modules/2.6.0-gentoo/build/include/asm/hardirq.h:6,
    from nvhw.h:31,
    from nvhw.c:16:
    /lib/modules/2.6.0-gentoo/build/include/asm/hw_irq.h:28: error: NR_IRQ_VECTORS' undeclared here (not in a function) /lib/modules/2.6.0-gentoo/build/include/asm/hw_irq.h:31: error:NR_IRQS' undeclared here (not in a function)
    make[1]: *** [nvhw.o] Error 1
    make[1]: Leaving directory `/usr/src/nforce/nvaudio'
    make: *** [all] Error 2
    (root@/usr/src/nforce/nvaudio)

    como se pone para ke coja…la configuracion del /etc/conf.d/net :rabieta: :confused:
    Un saludo.



  • 4

    rc-update add net.eth0 default

    yasta solucionau. eso era el ke habia ke cargar:rolleyes:, ahora a poner el sonido..

    Un saludo y gracias.



  • 5

    Y hablando del controlador de sonido… se puede hacer algo para que funcione el soundstorm? Es lo único que echo de menos de windows :(





Has perdido la conexión. Reconectando a Hardlimit.