Raspberry Pi

[Yorus]

Thanks for the info. At the moment what I have planned is to get a power strip that Lidl is advertising starting from the 25th and that has 4 lines of normal power and 2 USB ports with 2100mA, so it will probably work for the setup and to have the router connected and a few other things I have in that area of the house (floor lamp, landline phone and a clock).

Edit:

It's curious, but I can't connect the hard drive even with additional power.

My drive has the USB for data and another one for cases where the power is not enough in the form of a 'Y', and I've tried connecting the extra USB to a adapter that I used to be able to see the contents of the drive on my TV (which also doesn't give enough power) and not even the motor of the drive moves. I've also tried with that connector on the USB 3.0 of the laptop and on the hub with power supply and I still can't get anything.

Edit 2:

What a way to complicate my life, I was using the USB hub to only give extra power to the drive instead of plugging everything into the hub and the hub into the Raspberry :ugly:. Everything is working now, with transmission-daemon installed although I have to check the permissions of the drive. The next thing will be to share via NFS or Samba and the web server.

[Yorus]

I'm not sure if I should put this here or in the guide branch, but well, I choose here for now.

I brought the Raspberry to continue setting things up and I don't have a monitor next to the router and the laptop. The thing is that I went to mess with it and I couldn't connect via SSH. I connected it for a moment to the TV without a network or keyboard and I see that it stays for a good while where it is supposed to load precisely the SSH server, and after a couple of minutes it goes to login. Then I connected it again to the router and it continues to reject the connection (with Putty, here I have Win7). I also can't connect to the transmission-daemon but there is ping.

Anyway, I'll have to see if it's something to do with the network configuration...

[cobito]

Perhaps an IP conflict?

[Yorus]

@cobito:

¿Quizás un conflicto de IPs?

No, although just in case I have also set the laptop to a static IP and restarted the router, but nothing is working.

[cobito]

I find it strange that it doesn't accept calls from SSH and not from the transmission daemon either. What were you doing just before this happened to you?

[Yorus]

I think the last thing I did was a transmission test a week ago, when I was trying to put the hard drive and it ended up working for me even though it gave me an error when I went to save the downloaded file (a 2Mb PDF), but it was a matter of permissions to the disk or the directory where it is mounted. After that I turned it off with'shutdown -h now'.

[cobito]

I can only think of two things:
· That something has corrupted on the SD card (the most I can think of is that you do an apt-get upgrade and an rpi-update).
· That the Raspi is not receiving adequate power (plug it in without a network cable, no HDMI or USB and when it has finished charging, connect the network cable and try an SSH connection).

[Yorus]

The power supply is ruled out, as I have done the tests with only the power supply and the network cable connected and I have tried to let it start up even without the network cable and connect it later. As a power supply I have used the mobile charger of 1 Ampere which was what I had used until now, the USB hub with a 2A power supply and the USB 3.0 port of the laptop.

I think the issue is going to be about the data corruption option. Let's see if I can get an HDMI cable so as not to use my parents' living room TV or if not, wait until Wednesday and be at my beach bar.

[Yorus]

From bad to worse, I've gone from having no network services to not detecting eth0 and finally to having problems with the file system. It smells like problems with the SD card, but the ones I have don't appear in the list of http://elinux.org/RPi_SD_cards as either good or bad. Looking at that list, I see that of the 3 class 2 SDHC cards of 4Gb that appear, two of them give problems. I will try to find something more compatible, because the other one I have is the same but 8Gb and there is no similar one in the list. I'll also go for something class 10.

[cobito]

Did you try out the card with the Raspi or did you have it before? How long have you been using it on the board?

[Yorus]

I had it before, and I used it several times with the GP2X console, but I don't think it reached 10. With the raspberry it hasn't been more than in tests, I haven't had time for almost anything :eoh:

[cobito]

It's strange. I wonder if it has been given too many accesses and has deteriorated, but if she has only used it to test... I have just moved the files from the web server to the hard drive, let's see if it crashes due to excessive read/write cycles.

[Yorus]

I will do the same, leaving only the system on the SD, although I think it can be done so that only the boot is left on the SD and the rest on the external drive.

[victorpexacos]

I put a couple of photos of my raspberry pi, which arrived yesterday ;D

[Yorus]

The little box is cute, you will be posting your progress with the little one soon.

[cobito]

Madre mía, with case and all; what power. I have it tied with three commas to a 2.5 disk :ugly:

[victorpexacos]

I bought everything from ModMyPi. Raspi B + Case + Charger 5,25V@2A = 55e shipping included.

It's cheaper than at Farnell (about 50e -without charger) and it arrived in a week. The case is a free gift when you buy the raspi and you can mix and match the colors as you like. I'm really happy to have bought it from that site.

The charger is this:

[Tecnho]

For those interested, the 5 mpx camera module for the Pi is already on sale.
Camera board available for sale! | Raspberry Pi 20€ approx.

[cobito]

Well yes, I read a while ago that they were going to release the 5 mpixels camera. The truth is that the image quality is quite regular, but I am very likely to end up buying it for a little project I have in mind.

[Tecnho]

For 119USD they give a complete :troll: this kano looks good.