Problem when changing DDR3 memory

[Sylver]

@ninchi_punkrock Man, I haven't expressly tried that 3x2Gb kit, but considering that you have 4 slots, it would be better to find another 2x2Gb kit like yours, I've seen several but I don't know if they differ in any specification with yours.

However, I think that only 2 modules from the 3-module kit should work without problems, mainly because of what you comment that they have exactly the same specifications as yours, but let's see if any fellow who has tried that technique can confirm it to us to be on the safe side.

Greetings!

[Clipper]

@ninchi_punkrock
The Kingston listing:
https://www.kingston.com/es/memory/search/discontinuedmodel/59964/gigabyte-ga-p55a-ud4-motherboard
Which is not very extensive to be honest...

[ninchi_punkrock]

@sylver said in Problem when changing DDR3 memory:

@ninchi_punkrock Man, I haven't specifically tested that 3x2Gb kit, but considering that you have 4 slots, it would be better to find another 2x2Gb kit like yours, I've seen several but I don't know if they differ in any specification from yours.

However, I think they should work without problems with only 2 modules from the 3-module kit, mainly because of what you say about having exactly the same specifications as yours, but let's see if any fellow user who has tried that technique can confirm it for us to be on the safe side.

Best regards!

This is mine specifically, a 2x2GB kit

And this is the one I've seen on the second-hand market, a 3x2GB kit

What makes me doubt is whether from that 3x2GB kit I can use only 2 modules while maintaining dual channel. Or do the kits come programmed in some way to work in dual channel only if you use the complete kit?

That would be the main question.

I've never been presented with this issue to be honest... But to try...

[Clipper]

@ninchi_punkrock no idea about that brand.
Patriot does state on its official website that to install 4 RAM modules, you have to use their kit of 4 modules, otherwise you'll lose the MHz speed and it doesn't matter if they are identical.
They might work if you configure them manually, but they don't work with XCM.
In my case, they dropped from 1866 to 1600 MHz.
Check the website.
Regards.
P.d why don't you test if the BIOS recognizes the RAM to install the OS from scratch?
Regards 2

[ninchi_punkrock]

@clipper said in Problem when changing DDR3 memory:

@ninchi_punkrock I have no idea about that brand.
Patriot does say on its official website that to mount 4 RAM modules, it has to be its kit of 4 modules, otherwise it caps the speed in MHz and it doesn't matter if they are identical.
They might work if you configure them manually, but they don't work with XCM.
In my case, it capped them from 1866 to 1600 MHz.
Check the website.
Regards.
P.d why don't you try if the BIOS recognizes the RAM to install the OS from scratch?
Regards 2

The thing is that the BIOS in all cases recognizes the RAM it puts in without problems. It boots, recognizes the capacity, recognizes the voltages it should apply, the latencies, the speed...

But when it comes to booting the operating system, it is unable to manage the RAM and gives blue screens.
And if you run memtest right after booting, it is unable to go beyond 5% and freezes. Which makes me think that no OS will work with those sticks in memtest.

It seems like even though the BIOS initially recognizes the memory it puts in, it is then unable to work with it in any way.

[Sylver]

@ninchi_punkrock Yes, I understand what you mean.

This wouldn't fix your life?

Best regards!

[ninchi_punkrock]

@sylver said in Problem when changing DDR3 memory:

@ninchi_punkrock Yes, I understand what you mean.

Wouldn't this fix your problem?

Best regards!

Well, it's probably the best thing I can find on the second-hand market

I'll send him a message and see if I can get it up and running next week.

[Clipper]

@ninchi_punkrock said in Problem when changing DDR3 memory:

@sylver said in Problem when changing DDR3 memory:

@ninchi_punkrock Yes, I understand what you mean.

Wouldn't this fix your problem?

Best regards!

Well, it's probably the most accurate thing I can find in the second-hand market

I'll send him a message and see if I can get it up and running next week.

Good luck...
Two weeks ago I bought some Hope brakes for the bike and the useless transport agency lost them...
They have to return to the seller so that he can send them again.
That's it...
Best regards

[Sylver]

@clipper Normally, shipments with wallapop do not give problems, they are certified by correos and with insurance, so they usually work like a clock.
That said, let's hope the seller protects the memories well, that is the most important thing.

¡Saludos!

[ninchi_punkrock]

That's what I told the seller.

Please pack them well and securely to mitigate the thousand hits the package will take

Regarding the seller and the shipping system, it seems serious.

[Clipper]

@Sylver
If you choose pickup at post office si.
If you choose pickup at a "pickup point" stores normally, they do it by GLS.
Regards

[Sylver]

@clipper I directly choose to have it delivered to my home in person, and for now, that's perfect.

Because the collection points are a lottery as you rightly say...

Best regards!

[ninchi_punkrock]

Well, gentlemen!!!

Incredible but true.
I just received the 2 modules by mail perfectly packed.
I plug them in and do a boot just as I had everything configured and voila!!!

I picked up the 4 ram modules without any problems, no touching bios or anything.

Incredible. It has surprised me for the better.

Now I just have to adjust the Command Rate to 1T since supposedly these mushkin allow it.

But beyond that, 10 out of 10.

Many thanks to everyone as always!!

[Clipper]

@ninchi_punkrock said in Problem when changing DDR3 memory:

Well, folks!!!

Incredible but true.
I just received the 2 modules by mail perfectly packed.
I plug them in without further ado and do a boot just as I had everything configured and voila!!!

It has picked up the 4 modules of ram without any problems, neither touching bios nor anything.

Incredible. It has surprised me for the better.

Now I just have to adjust the Command Rate to 1T since supposedly these mushkins allow it.

But beyond that, 10 out of 10.

Many thanks to everyone as always!!

I'm glad for you.
P.d. Comb or tidy up the cables a "little"
Best regards

[Sylver]

@ninchi_punkrock I'm very happy for you, buddy! If a model worked perfectly, it couldn't fail
Now I hope she enjoyed it a lot, your "new owner".

Best regards!