TJ07 BlackMod by Jotole

[Jotole]

To power this equipment, I had thought of using 2 power supplies, the Enermax and a modular Corsair that I had bought. I have been doing consumption tests and the equipment with the processor at 5Ghz, with stock graphics, passing a Vantage goes to 750W. I think I have enough power to upgrade the graphics, so I didn't mount the second power supply. (I correct an error in consumption, that data is incorrect, the equipment in idle consumes 350W, but at full load it goes to 900W).

We continue connecting components, and doing cable distribution.

I don't like it at all, where is the 6-pin connector of the motherboard, there's no way to take it anywhere.

On the side where the SSDs are, I have made a grille of the same material as the one on the front, darkening the design of the tower without removing the solids from view.

The photos are taken in the basement of the house at dawn, I can't get the effect that the matte grilles have on the equipment. I will take photos in natural light over the weekend to see if it's appreciated.

Image of where I filled the RL circuit. As a good novice, I have to tell you that when filling the circuit, water came out from above, with the consequent damage, all red, 2 graphics and part of the motherboard.

I don't think it's necessary to describe the state it left me in. Fortunately, nothing happened at all. I dried everything perfectly. And I continued, of course, with much more care…........xD

Now the equipment is started and in operation.

Detail of the AP 121, in operation seen from the front.

And seen from behind, here they really impose, of course it's designed that way…........xD.

Images of the equipment in its definitive location, next to the 3 DELL 2312HM, its companions for a long season.

This has been all for now, I have many details in mind, but I need to get rid of the PC "monkey" that I have, I have been planning this since November, December and January without a PC since I sold some components of the previous one to cover expenses.

So this month or two I am going to dedicate myself to fine-tuning the OC, playing and enjoying the equipment.

There are still details to be refined as I said before and to cut the side to see the interior. I am a bit lost there to be honest, I haven't thought of anything. Any ideas??

Thanks to everyone and I hope you enjoy it.

Best regards.

[Jotole]

Photo session in daylight, now if you look closely you can see the shade of the matte black and the brushed aluminum of the tower.

I hope you like them:

[Tecnho]

What a small and heavy Nvidia you have, you can already give it heat, now you're telling me where you put the cookies in the Mod XD.
Congratulations and thanks for sharing it, these boxes are long-nosed.

[Jotole]

@Tecnho:

Wow, what a great job and what a heavy weight that Nvidia has, you can already give it heat, now you're telling me where you put the cookies in the Mod XD.
Congratulations and thanks for sharing it, these boxes are long-lasting as hell.

Jajajajaa Thanks…

Cookies and Coca-Cola, they are my companions, on work nights.........xD. Guess where I put them.....xD.

The boxes are long-lasting, a lot, but I fill them so fast that in a year, I have changed boxes 3 times. Imagine that.

Salu2...

[Sylver]

Congratulations also for this work, keep it up, go for it with those jobs because they suit you very well.

Best regards

[Jotole]

@Sylver:

Congratulations on this work too, keep it up, go for it with those jobs because they suit you quite well.

Best regards

Hehe, Thanks again. ;).

Cheers…

[amd125]

I'm blown away by your mods. They're amazing and most of all the work behind them is tremendous. Beautiful case by the way.

Speechless.

[Jotole]

@amd125:

I'm amazed by your mods. They're impressive and above all, the work behind them is tremendous. Beautiful case, by the way.

Speechless.

Thank you very much, I'm glad you like it so much, it comforts the hours of work that have...

Best regards..

[zhuce]

¡Esta publicación está eliminada!

[fjavi]

That big box looks like it's posing in the white villages of Malaga, great work you put into it and in the end it looks great on you, I'm a bit of a mess for that, but it's great to see these Mods, the one by Praimus is also amazing.

Just assembling the three threads with all the details of the Mods must take time, but it looks great.

Best regards

[Jotole]

@fjavi:

That big box and it looks like it's posing in the white villages of Malaga, great job you put into it and in the end they look great, I'm a mess for that, but it's great to see these Mods, also the one by Praimus is amazing.

Just assembling the three threads with all the details of the Mods must take time, but it looks great.

Best regards

Jaajaja, if you photograph them in the daylight, you can see more details. Given the weight of the other mods, they couldn't get out of the basement of the house . Anyone can move the "bugs"

And resizing images, uploading them, and writing the threads does take time, but since I do one a year or so it's not that heavy........... ;).

Thanks fjavi,

Best regards..

[Alcor]

What a great mod, you are definitely an artist Jotole, as fjavi says, the contrast of the box with the landscape of the white houses looks unbeatable.:love:

Best regards and keep it up.;D