Bios corrupted when updating it. The PC stays with the screen black.
-
There are two ways to recover a corrupted BIOS:
1st) Buy the integrated program at a computer store (there are websites where they sell this).
2nd) Get another motherboard of the same model, update it, just before starting the process (with the PC on), remove the flash chip and put yours in. Proceed to program the memory. Once reprogrammed, it will work again on your motherboard.
For next time, if the medium from which you want to update gives the slightest failure, change it. The process is delicate enough not to do acrobatics.
Toda la actualidad en la portada de Hardlimit
Mis cacharros -
There are two ways to recover a corrupted BIOS:
1st) Buy the integrated program in a computer store (there are sites on the internet where they sell this).
2nd) Get another board of the same model, update it, just before starting the process (with the PC on), remove the flash chip and put yours in. Proceed to program the memory. Once reprogrammed, it will work again on your board.
For next time, if the medium from which you want to update gives the slightest failure, change it. The process is delicate enough as it is, so don't go juggling.
the idea is very good, but correct me if I'm wrong, I've been looking around the net for that option/s and I found two things
the chip
BIOS Chip Asus P5K E P5K E WiFi AP | eBay
the location of the chip,
to the right and a little below the black PCIe
http://www.nordichardware.se/skrivelser_img/526/lay3.jpg
and if I'm not mistaken it's soldered :eoh:
regards -
Well yes, it seems they decided to use DPAK encapsulation.
Anyway, it's all a matter of getting a soldering iron and trying to remove it.
The only recommendation I can make is that when soldering the new one, it should be done with an aluminum or copper plate stuck to the surface of the integrated to avoid its destruction due to the temperature.
With the matter as it is, option 2 that I proposed earlier is not valid in this case and probably the only way to save the board is by using a soldering iron.
Toda la actualidad en la portada de Hardlimit
Mis cacharros -
I wonder. Cobito, wouldn't it be better if he felt like welding that he would weld a "support" and not the memory.
Regards -
A P35 motherboard on ebay costs about 40€…
-
pregunto yo. cobito, no seria mejor si le da por ponerse a soldar que soldara un "soporte" y no la memoria.
saludosTo use a socket, you would have to use an integrated in DIP format and I highly doubt they sell BIOS programs in DIP. You could use a programmer, acquire a blank memory in DIP and thus be able to solder the socket, which requires some resources that not everyone has.
A P35 motherboard on ebay costs about 40€…
Well, that depends on the time and resources of each person. The truth is that 10€ for the programmed flash is quite expensive and if you don't have a soldering iron or knowledge, it's a problem.
Toda la actualidad en la portada de Hardlimit
Mis cacharros -
I have no problem soldering, but I would rather take it to a professional because these chips are not made to be soldered manually. Power can be done (PD. how it is done:
) but, without the material and some experience, it is easy not to be well soldered, to make a bridge between two contacts or to burn it because they are very, very small. If you add what they charge you plus the programmed BIOS, it is practically the price of a complete second-hand board. -
First of all, it would be convenient for wuwuh to explain if he has managed to recover the BIOS by successfully flashing it.
In any case, and this is a personal opinion, if I knew that the chip was dead (something we are not certain about, but we suspect) I wouldn't complicate things: new motherboard and that's it.
I wouldn't throw away the old one, and I would try to find a chip for it and practice pulse and aim with the soldering iron, if it comes out well, then sell it, if it goes wrong, then I won't have lost much either. -
-
I think you can recover it without soldering anything, just do what Asus says and insert the motherboard CD that already has a bios, and if it doesn't work easily with the CD, try with a floppy disk, I saw people easily recover those P5K because of corrupt bios.
That's why the burner or floppy disk light is blinking, because it's looking for the bios file.
