• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Configuración entorno grafico

    Programado Fijo Cerrado Movido
    Sistemas operativos
    3
    17
    1.6k
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • YorusY
      Yorus Veteranos HL
      Última edición por

      Anodadado me hallo 😕

      Este es el mío:

      xorg.conf (X.Org X Window System server configuration file)

      This file was generated by dexconf, the Debian X Configuration tool, using

      values from the debconf database.

      Edit this file with caution, and see the xorg.conf manual page.

      (Type "man xorg.conf" at the shell prompt.)

      This file is automatically updated on xserver-xorg package upgrades only

      if it has not been modified since the last upgrade of the xserver-xorg

      package.

      Note that some configuration settings that could be done previously

      in this file, now are automatically configured by the server and settings

      here are ignored.

      If you have edited this file but would like it to be automatically updated

      again, run the following command:

      sudo dpkg-reconfigure -phigh xserver-xorg

      Section "Monitor"
      Identifier "Configured Monitor"
      EndSection

      Section "Screen"
      Identifier "Default Screen"
      Monitor "Configured Monitor"
      Device "Configured Video Device"
      DefaultDepth 24
      EndSection

      Section "Module"
      Load "glx"
      EndSection

      Section "Device"
      Identifier "Configured Video Device"
      Driver "nvidia"
      Option "NoLogo" "True"
      EndSection

      Esto con Ubuntu 8.10 y los drivers privativos. Para los drivers libres bastaría con cambiar donde pone Driver "nvidia" por Driver "nv". ¿Que distro usas?.

      Edito: Vale, que has puerto mas archivos. Con el xorg.conf te vale, los otros ni los toques. Puedes probar a cambiar donde pone Vesa por nv.

      Mi centro de operaciones
      Mi blog en HL

      hlbm signature

      A 1 Respuesta Última respuesta Responder Citar 0
      • A
        AMD6 @Yorus
        Última edición por

        he provado a poner "nv", "nvidia" y "vesa" y sigue sin arreglarse el problema…
        por cierto, tengo el fedora 9

        YorusY 1 Respuesta Última respuesta Responder Citar 0
        • YorusY
          Yorus Veteranos HL @AMD6
          Última edición por

          De Fedora no tengo ni idea, aunque me ha parecido leer que para reconfigurar el sistema gráfico deberás hacer:

          system-config-display –reconfig

          Mi centro de operaciones
          Mi blog en HL

          hlbm signature

          A 1 Respuesta Última respuesta Responder Citar 0
          • A
            AMD6 @Yorus
            Última edición por cobito

            hola yorus,
            al provarlo me sale un error, te lo copiaria aqui pero no puedo… al parecer da un error en algun recurso.

            por cierto, he provado a instalar los drivers especificos para linux, pero me crea un archivo al haber un error a la hora de instalarlos:

            nvidia-installer log file '/var/log/nvidia-installer.log'
            creation time: Tue Mar 3 23:33:06 2009
            installer version: 1.0.7

            option status:
            license pre-accepted : false
            update : false
            force update : false
            expert : false
            uninstall : false
            driver info : false
            precompiled interfaces : true
            no ncurses color : false
            query latest version : false
            OpenGL header files : true
            no questions : false
            silent : false
            no recursion : false
            no backup : false
            kernel module only : false
            sanity : false
            add this kernel : false
            no runlevel check : false
            no network : false
            no ABI note : false
            no RPMs : false
            no kernel module : false
            force SELinux : default
            no X server check : false
            no cc version check : false
            force tls : (not specified)
            force compat32 tls : (not specified)
            X install prefix : (not specified)
            X library install path : (not specified)
            X module install path : (not specified)
            OpenGL install prefix : (not specified)
            OpenGL install libdir : (not specified)
            compat32 install chroot : (not specified)
            compat32 install prefix : (not specified)
            compat32 install libdir : (not specified)
            utility install prefix : (not specified)
            utility install libdir : (not specified)
            doc install prefix : (not specified)
            kernel name : (not specified)
            kernel include path : (not specified)
            kernel source path : (not specified)
            kernel output path : (not specified)
            kernel install path : (not specified)
            proc mount point : /proc
            ui : (not specified)
            tmpdir : /tmp
            ftp mirror : ftp://download.nvidia.com
            RPM file list : (not specified)

            Using: nvidia-installer ncurses user interface
            -> Tagging shared libraries with chcon -t textrel_shlib_t.
            -> License accepted.
            -> Installing NVIDIA driver version 180.29.
            -> No precompiled kernel interface was found to match your kernel; would you li
            ke the installer to attempt to download a kernel interface for your kernel f
            rom the NVIDIA ftp site (ftp://download.nvidia.com)??) (Answer: No)
            -> No precompiled kernel interface was found to match your kernel; this means
            that the installer will need to compile a new kernel interface.
            -> Performing CC sanity check with CC="cc".
            -> Performing CC version check with CC="cc".
            ERROR: Unable to find the kernel source tree for the currently running kernel.
            Please make sure you have installed the kernel source files for your
            kernel and that they are properly configured; on Red Hat Linux systems,
            for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM
            installed. If you know the correct kernel source files are installed,
            you may specify the kernel source path with the '–kernel-source-path'
            command line option.
            ERROR: Installation has failed. Please see the file
            '/var/log/nvidia-installer.log' for details. You may find suggestions
            on fixing installation problems in the README available on the Linux
            driver download page at www.nvidia.com.

            PD: no tngo conexion a internet en el ordenador.

            YorusY 1 Respuesta Última respuesta Responder Citar 0
            • YorusY
              Yorus Veteranos HL @AMD6
              Última edición por

              Sin internet si que va a ser problemático. ¿No tienes internet en ese equipo concretamente o en el lugar (casa u oficina) donde lo tienes?.

              Mi centro de operaciones
              Mi blog en HL

              hlbm signature

              A 1 Respuesta Última respuesta Responder Citar 0
              • A
                AMD6 @Yorus
                Última edición por

                no tengo internet en ese pc, pero en el pc de la habitación de al lado si.

                NiTTAKuN 1 Respuesta Última respuesta Responder Citar 0
                • NiTTAKuN
                  NiTTAKu @AMD6
                  Última edición por

                  Para instalar los drivers de nvidia necesitas tener los kernel sources y las utilidades de compilación de paquetes, sin acceso a internet lo vas a tener tela de jodido… Los drivers vesa no deberían petarte así, algo tiene que haber en ese Xorg que te esta fastidiando todo.

                  Que monitor usas? A mi me huele mas a un fallo en la configuración del monitor, por casualidad no se te irá el monitor a modo standby? puede que la configuración del Xorg te tire el monitor a frecuencias fuera de rango y este se vaya directamente a standby para protegerse de fallos.

                  A 1 Respuesta Última respuesta Responder Citar 0
                  • A
                    AMD6 @NiTTAKu
                    Última edición por

                    pues la verdad es que no lo se si se queda en modo stanby… la pantalla se queda en negro con un mensaje de que no lelga el señal. el monitor es un Acer MONITOR TFT 18,5" ACER X193HQb HD
                    estado mirando estos archivos y no se si tendra algo que ver...

                    Xresources

                    ! This is the global resources file that is loaded when
                    ! all users log in, as well as for the login screen

                    ! Fix the Xft dpi to 96; this prevents tiny fonts
                    ! or HUGE fonts depending on the screen size.
                    Xft.dpi: 96

                    ! hintstyle: medium means that (for Postscript fonts) we
                    ! position the stems for maximum constrast and consistency
                    ! but do not force the stems to integral widths. hintnone,
                    ! hintslight, and hintfull are the other possibilities.
                    Xft.hintstyle: hintmedium
                    Xft.hinting: true

                    NiTTAKuN 1 Respuesta Última respuesta Responder Citar 0
                    • NiTTAKuN
                      NiTTAKu @AMD6
                      Última edición por

                      Por lo que comentas lo mas seguro es que la tarjeta de video manda al monitor frecuencias fuera de rango, por eso te sale el mensaje de no hay señal. Prueba a poner tu xorg.conf tal que asi (haciendo un backup antes del antiguo):

                      # Xorg configuration created by pyxf86config
                      
                      Section "ServerLayout"
                          Identifier     "Layout0"
                          Screen      0  "Screen0"
                          InputDevice    "Keyboard0" "CoreKeyboard"
                          InputDevice    "Mouse0" "CorePointer"
                      EndSection
                      
                      Section "InputDevice"
                      # keyboard added by rhpxl
                      Identifier "Keyboard0"
                      Driver "kbd"
                      Option "XkbModel" "pc105"
                      Option "XkbLayout" "es"
                      EndSection
                      
                      Section "Device"
                      Identifier "Videocard0"
                      Driver "vesa"
                      EndSection
                      
                      Section "Monitor"
                          Identifier     "Monitor0"
                          VendorName     "Acer"
                          ModelName      "X193HQb"
                          HorizSync       30.0 - 80.0
                          VertRefresh     55.0 - 60.0
                          Option         "DPMS"
                      EndSection
                      
                      Section "Screen"
                          Identifier     "Screen0"
                          Device         "Videocard0"
                          Monitor        "Monitor0"
                          DefaultDepth    24
                          SubSection "Display"
                      		Viewport   0 0
                      		Depth     24
                      		Modes    "1024x768" "800x600" "640x480" 
                          EndSubSection
                      
                      EndSection
                      
                      A NiTTAKuN 2 Respuestas Última respuesta Responder Citar 0
                      • A
                        AMD6 @NiTTAKu
                        Última edición por

                        me sigue dando problemas, por lo que parece tendria que definir el mouse… me sale este mensage:

                        Data incomplete in file /etc/X11/xorg.conf
                        Undefined InputDevice "Mouse0" referenced by serverLayout "Layout0"
                        (EE) Problem parsing the config file
                        (EE) Error parsing the config file

                        Fatal server error:
                        no screens found

                        1 Respuesta Última respuesta Responder Citar 0
                        • NiTTAKuN
                          NiTTAKu @NiTTAKu
                          Última edición por

                          Fallo mio, como en el original tuyo no venía se me olvidó ponerlo :D, ahi te va modificado con el mouse:

                          # Xorg configuration created by pyxf86config
                          
                          Section "ServerLayout"
                              Identifier     "Layout0"
                              Screen      0  "Screen0"
                              InputDevice    "Keyboard0" "CoreKeyboard"
                              InputDevice    "Mouse0" "CorePointer"
                          EndSection
                          
                          Section "InputDevice"
                          # keyboard added by rhpxl
                          Identifier "Keyboard0"
                          Driver "kbd"
                          Option "XkbModel" "pc105"
                          Option "XkbLayout" "es"
                          EndSection
                          
                          Section "InputDevice"
                          Identifier "Mouse0"
                          Driver "mouse"
                          Option "ZAxisMapping" "4 5"
                          Option "Buttons" "3"
                          Option "AlwaysCore" "true"
                          Option "Protocol" "auto"
                          Option "Device" "/dev/mouse"
                          EndSection 
                          
                          Section "Device"
                          Identifier "Videocard0"
                          Driver "vesa"
                          EndSection
                          
                          Section "Monitor"
                              Identifier     "Monitor0"
                              VendorName     "Acer"
                              ModelName      "X193HQb"
                              HorizSync       30.0 - 80.0
                              VertRefresh     55.0 - 60.0
                              Option         "DPMS"
                          EndSection
                          
                          Section "Screen"
                              Identifier     "Screen0"
                              Device         "Videocard0"
                              Monitor        "Monitor0"
                              DefaultDepth    24
                              SubSection "Display"
                          		Viewport   0 0
                          		Depth     24
                          		Modes    "1024x768" "800x600" "640x480" 
                              EndSubSection
                          
                          EndSection
                          
                          A 1 Respuesta Última respuesta Responder Citar 0
                          • A
                            AMD6 @NiTTAKu
                            Última edición por

                            ueee ya lo hemso conseguido! me ha entrado jaja la verdad es que la informatica mola cuando te salen las cosas :D:D el merito es tuyo!

                            NiTTAKuN 1 Respuesta Última respuesta Responder Citar 0
                            • NiTTAKuN
                              NiTTAKu @AMD6
                              Última edición por

                              Ahora solo te falta configurar la red, bajarte los paquetes necesarios para compilar y pillarte los drivers de nVidia, asi ya tendras aceleracion gráfica y podrás usar la resolucion nativa de tu monitor 😉

                              1 Respuesta Última respuesta Responder Citar 0
                              • 1 / 1
                              • First post
                                Last post

                              Foreros conectados [Conectados hoy]

                              0 usuarios activos (0 miembros e 0 invitados).
                              febesin, pAtO,

                              Estadísticas de Hardlimit

                              Los hardlimitianos han creado un total de 543.3k posts en 62.8k hilos.
                              Somos un total de 34.7k miembros registrados.
                              ssaybb ha sido nuestro último fichaje.