• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Dead graphics? :( XFX 8800GTS 320

    Programado Fijo Cerrado Movido Tarjetas Gráficas
    80 Mensajes 16 Posters 14.4k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • XaviJSX Desconectado
      XaviJS Veteranos HL @Nemo
      Última edición por

      That's what they say when you do this... they fail again soon. Let's see how long it lasts, for now it seems like nothing has happened to it; it even works better because I cleaned the entire heatsink and the fan was a bit clogged... I've been a bit neglectful with the poor thing. Aish.. Best regards!
      incrediboyI 1 Respuesta Última respuesta Responder Citar 0
      • incrediboyI Desconectado
        incrediboy Veteranos HL @XaviJS
        Última edición por

        the fact that it fails again is relative. I baked the ati 1950 of a colleague at Christmas and it is still alive.
        Jesus_PanellaJ 1 Respuesta Última respuesta Responder Citar 0
        • Jesus_PanellaJ Desconectado
          Jesus_Panella @incrediboy
          Última edición por

          Have you checked the thermal paste on the GPU?

          This happened to me on my 8800 GT (G92) that was malfunctioning, and after changing the paste, the problem was fixed.

          NemoN 1 Respuesta Última respuesta Responder Citar 0
          • NemoN Desconectado
            Nemo Veteranos HL @Jesus_Panella
            Última edición por

            Well, one thing is a drop in performance and another is the appearance of artifacts, that would be a poorly soldered capacitor or something like that.

            Best regards

            Mis equipos

            XaviJSX 1 Respuesta Última respuesta Responder Citar 0
            • XaviJSX Desconectado
              XaviJS Veteranos HL @Nemo
              Última edición por

              It would be something badly welded if. But for now it's still alive and kicking :d

              1 Respuesta Última respuesta Responder Citar 0
              • XaviJSX Desconectado
                XaviJS Veteranos HL
                Última edición por

                It has happened again :cry:

                I have been away practically all of August, my mother has been using the PC to check her email and browse a bit. 2 days ago she called me saying that the PC was showing her vertical red lines and that it was freezing. Exactly the same thing that happened to me..

                Today I have returned and it has the same symptoms, tomorrow I will reboot for the second time to see how it goes…

                Best regards!

                NemoN 1 Respuesta Última respuesta Responder Citar 0
                • NemoN Desconectado
                  Nemo Veteranos HL @XaviJS
                  Última edición por

                  That's what happens when a mother is left with the PC all summer, they get hooked on Crysis 2 and overheat the graphics :p:p.

                  Good luck with the second batch.

                  Mis equipos

                  SylverS 1 Respuesta Última respuesta Responder Citar 0
                  • SylverS Desconectado
                    Sylver Veteranos HL @Nemo
                    Última edición por

                    @Nemo:

                    That's what happens when a mother is left with the PC all summer, they get hooked on Crysis 2 and overheat the graphics :p:p.

                    Good luck with the second batch.

                    You went too far… xDD :p:p

                    Well, I think baking is miraculous and harmful at the same time, so much concentrated heat wouldn't be the same as a 500% overclock with a stock cooler? Well, not exactly because the GPU isn't active, but the heat would somewhat deteriorate the whole package... right? I'm faced with that dilemma, correct me if I've overthought it ?

                    Regards

                    >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
                    >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
                    >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

                    XaviJSX 1 Respuesta Última respuesta Responder Citar 0
                    • XaviJSX Desconectado
                      XaviJS Veteranos HL @Sylver
                      Última edición por

                      Heat is not good in excess, of course. The condensers and such suffer, in addition to some plastics that can be affected...

                      But when you can no longer use the graphic in any of the ways and you only have this option left... you do it xD.

                      Well, gentlemen, I write to you with the graphic baked for the second time :p:risitas::D

                      Greetings!

                      TecnhoT SylverS 2 Respuestas Última respuesta Responder Citar 0
                      • TecnhoT Desconectado
                        Tecnho Veteranos HL @XaviJS
                        Última edición por

                        Haha I'm glad to see that the famous 8800 is still putting up a fight, they were good, so let's just hope that all this oven consumption is profitable for you XD

                        hlbm signature

                        1 Respuesta Última respuesta Responder Citar 0
                        • SylverS Desconectado
                          Sylver Veteranos HL @XaviJS
                          Última edición por

                          @XaviJS:

                          Heat is not good in excess of course. The condensers and such suffer, in addition to some plastics that can be affected...

                          But when the graphics card can no longer be used in any of the ways and you only have this option left... you do it xD.

                          Well gentlemen, I write to you with the graphics card baked for the second time :p:risitas::D

                          Greetings!

                          That's what I thought... and indeed what can you do if it no longer responds and there is no alternative ? to cook it then! xD

                          I am very happy that it has risen from the dead again, that 8800 deserves a place in the hall of fame of graphics cards, it is giving its all ?

                          Greetings!

                          >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
                          >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
                          >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

                          ferelxyxF 1 Respuesta Última respuesta Responder Citar 0
                          • ferelxyxF Desconectado
                            ferelxyx Veteranos HL @Sylver
                            Última edición por

                            that is a failure in the memories and possibly of some soldering of the same
                            and the baking causes the solders to make contact and sometimes it turns out more or less well
                            and it lasts a good season and other times it lasts a short time
                            it is a matter of luck

                            regards

                            XaviJSX H 2 Respuestas Última respuesta Responder Citar 0
                            • XaviJSX Desconectado
                              XaviJS Veteranos HL @ferelxyx
                              Última edición por

                              A question, do you put the broiler (those of you who have ever done it in the oven).

                              I'm afraid to put it on because I think it's too hot on top, but on the other hand I think that heat only from below won't have the full effect. My oven doesn't have a fan.. xD.

                              I put the broiler on for the last 2 minutes only, so that it gets a little heat on top.

                              Best regards!

                              _Neptunno__ ObioneO 2 Respuestas Última respuesta Responder Citar 0
                              • _Neptunno__ Desconectado
                                _Neptunno_ MODERADOR @XaviJS
                                Última edición por

                                @XaviJS:

                                A question, do you use the gratinador (those who have ever done baking).

                                I'm afraid to use it because I think it's too much heat on top, but on the other hand I think that heat only from below won't have the full effect. My oven doesn't have a fan.. xD.

                                I only put the gratinador on for the last 2 minutes, so that it gets a little heat on top.

                                Best regards!

                                It looks like a cooking forum, lol.

                                Well, when I did it with an 8600GTS, I set it to about 200º for 10 minutes, but I got scared and left it for only 6, and it worked.

                                Best regards!

                                C 1 Respuesta Última respuesta Responder Citar 0
                                • C Desconectado
                                  CNCBCN @_Neptunno_
                                  Última edición por

                                  Question: if you say that what is failing are the welds of the memory modules, wouldn't a touch of a blowtorch be better?

                                  1 Respuesta Última respuesta Responder Citar 0
                                  • ObioneO Desconectado
                                    Obione Veteranos HL @XaviJS
                                    Última edición por

                                    @XaviJS:

                                    I'm afraid to put it because I think it's too hot on top, but on the other hand I think that heat only on the bottom won't do the whole effect. My oven doesn't have a fan.. xD.

                                    I wouldn't know how to leave the GTS at point xD but I can tell you that a Spanish speaker usually says "other side", if you say "banda" the most likely thing is that they think of football :risitas:

                                    Good luck with your baking ?

                                    Fractal Design Define R4 - 4 x Servo Gentle Typhoon - Be Quiet SilentWings USC 140 - BitFenix Formula Gold 550W - Asus Crosshair VI Hero - AMD Ryzen 5 3600 - Thermalright Macho Rev.B - 2x8GB Crucial Ballistix Sport AT 3200 - MSI GTX 1070 Gaming X - Corsair MP510 480GB - Seagate 7200.14 1TB - Yamaha HS 7 ♫ ASUS Xonar DGX ♫ Beyer Dynamic MMX-300 - LG 23MP57VQ-P - Oculus Rift CV1 - Logitech G27 - Zalem V2

                                    kynesK XaviJSX 2 Respuestas Última respuesta Responder Citar 0
                                    • kynesK Desconectado
                                      kynes Veteranos HL @Obione
                                      Última edición por

                                      This afternoon I'm going to try it with a laptop from a friend whose graphics have crashed… Let's see if I can revive it, it would fix me up for a job.

                                      hlbm signature

                                      1 Respuesta Última respuesta Responder Citar 0
                                      • XaviJSX Desconectado
                                        XaviJS Veteranos HL @Obione
                                        Última edición por

                                        This post is being processed/translated. The original version will be shown:

                                        @Obione:

                                        No sabría decirte como dejar la GTS al punto xD pero sí te puedo decir que un castellanoparlante suele decir "otro lado", si le dices banda lo más probable es que piense el fútbol :risitas:

                                        Suerte con tus rehorneados 😉

                                        Vaya, siesque el fútbol cuanto daño ha hecho… :risitas::risitas:

                                        Kynes, desmonta todo lo que puedas antes de ponerlo al horno, disipadores, pasta térmica, todo fuera. y los plásticos claro.

                                        Saludos!

                                        kynesK 1 Respuesta Última respuesta Responder Citar 0
                                        • kynesK Desconectado
                                          kynes Veteranos HL @XaviJS
                                          Última edición por

                                          This post is being processed/translated. The original version will be shown:

                                          Es un módulo MXM, por lo que mucho más fácil de lo que creía. Ahora mismo la tengo en el horno, a ver si resucita… Estoy hasta nervioso XD

                                          hlbm signature

                                          TecnhoT kynesK 2 Respuestas Última respuesta Responder Citar 0
                                          • TecnhoT Desconectado
                                            Tecnho Veteranos HL @kynes
                                            Última edición por

                                            This post is being processed/translated. The original version will be shown:

                                            Jajaja anda que no dan de sí a ver como os va saliendo la cosa yo tengo una 6600gt por ahí tirada pero como la casa es de mi madre dice que de ahí sale vapores toxicos fijo y no me deja meterla, así que esperare a que no esté, a esta edad tener que andar así XD
                                            Bueno espero vuestros resultados.

                                            hlbm signature

                                            1 Respuesta Última respuesta Responder Citar 0

                                            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                            With your input, this post could be even better 💗

                                            Registrarse Conectarse
                                            • 1
                                            • 2
                                            • 3
                                            • 4
                                            • 1 / 4
                                            • First post
                                              Last post

                                            Foreros conectados [Conectados hoy]

                                            0 usuarios activos (0 miembros y 0 invitados).
                                            febesin, pAtO,

                                            Estadísticas de Hardlimit

                                            Los hardlimitianos han creado un total de 543.6k posts en 62.9k hilos.
                                            Somos un total de 34.9k miembros registrados.
                                            delkunaguero1 ha sido nuestro último fichaje.
                                            El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.