Dead graphics? :( XFX 8800GTS 320
-
That's what happens when a mother is left with the PC all summer, they get hooked on Crysis 2 and overheat the graphics :p:p.
Good luck with the second batch.
-
That's what happens when a mother is left with the PC all summer, they get hooked on Crysis 2 and overheat the graphics :p:p.
Good luck with the second batch.
You went too far… xDD :p:p
Well, I think baking is miraculous and harmful at the same time, so much concentrated heat wouldn't be the same as a 500% overclock with a stock cooler? Well, not exactly because the GPU isn't active, but the heat would somewhat deteriorate the whole package... right? I'm faced with that dilemma, correct me if I've overthought it
Regards
>> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
>> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
>> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W -
Heat is not good in excess, of course. The condensers and such suffer, in addition to some plastics that can be affected...
But when you can no longer use the graphic in any of the ways and you only have this option left... you do it xD.
Well, gentlemen, I write to you with the graphic baked for the second time :p:risitas::D
Greetings!
-
Haha I'm glad to see that the famous 8800 is still putting up a fight, they were good, so let's just hope that all this oven consumption is profitable for you XD
-
Heat is not good in excess of course. The condensers and such suffer, in addition to some plastics that can be affected...
But when the graphics card can no longer be used in any of the ways and you only have this option left... you do it xD.
Well gentlemen, I write to you with the graphics card baked for the second time :p:risitas::D
Greetings!
That's what I thought... and indeed what can you do if it no longer responds and there is no alternative
to cook it then! xDI am very happy that it has risen from the dead again, that 8800 deserves a place in the hall of fame of graphics cards, it is giving its all
Greetings!
>> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
>> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
>> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W -
that is a failure in the memories and possibly of some soldering of the same
and the baking causes the solders to make contact and sometimes it turns out more or less well
and it lasts a good season and other times it lasts a short time
it is a matter of luckregards
-
A question, do you put the broiler (those of you who have ever done it in the oven).
I'm afraid to put it on because I think it's too hot on top, but on the other hand I think that heat only from below won't have the full effect. My oven doesn't have a fan.. xD.
I put the broiler on for the last 2 minutes only, so that it gets a little heat on top.
Best regards!
-
A question, do you use the gratinador (those who have ever done baking).
I'm afraid to use it because I think it's too much heat on top, but on the other hand I think that heat only from below won't have the full effect. My oven doesn't have a fan.. xD.
I only put the gratinador on for the last 2 minutes, so that it gets a little heat on top.
Best regards!
It looks like a cooking forum, lol.
Well, when I did it with an 8600GTS, I set it to about 200º for 10 minutes, but I got scared and left it for only 6, and it worked.
Best regards!
-
Question: if you say that what is failing are the welds of the memory modules, wouldn't a touch of a blowtorch be better?
-
I'm afraid to put it because I think it's too hot on top, but on the other hand I think that heat only on the bottom won't do the whole effect. My oven doesn't have a fan.. xD.
I wouldn't know how to leave the GTS at point xD but I can tell you that a Spanish speaker usually says "other side", if you say "banda" the most likely thing is that they think of football :risitas:
Good luck with your baking
-
This afternoon I'm going to try it with a laptop from a friend whose graphics have crashed… Let's see if I can revive it, it would fix me up for a job.
-
This post is being processed/translated. The original version will be shown:
No sabría decirte como dejar la GTS al punto xD pero sí te puedo decir que un castellanoparlante suele decir "otro lado", si le dices banda lo más probable es que piense el fútbol :risitas:
Suerte con tus rehorneados
Vaya, siesque el fútbol cuanto daño ha hecho… :risitas::risitas:
Kynes, desmonta todo lo que puedas antes de ponerlo al horno, disipadores, pasta térmica, todo fuera. y los plásticos claro.
Saludos!
-
This post is being processed/translated. The original version will be shown:
Es un módulo MXM, por lo que mucho más fácil de lo que creía. Ahora mismo la tengo en el horno, a ver si resucita… Estoy hasta nervioso XD
-
This post is being processed/translated. The original version will be shown:
Jajaja anda que no dan de sí a ver como os va saliendo la cosa yo tengo una 6600gt por ahí tirada pero como la casa es de mi madre dice que de ahí sale vapores toxicos fijo y no me deja meterla, así que esperare a que no esté, a esta edad tener que andar así XD
Bueno espero vuestros resultados. -
This post is being processed/translated. The original version will be shown:
Ha resucitado. Estoy casi llorando de la emoción…
-
This post is being processed/translated. The original version will be shown:
Alabado sea San FAGOR!!! cuantas alegrias nos dá ;:risitas:…y para esto se gastan los fabricantes billones de dolares en "salas blancas" y demás finuras...un buen horno con su gratinador hombre!!. :risitas::risitas:
Un saludo y felicidades por el horneado.
-
This post is being processed/translated. The original version will be shown:
Vaya, esta resultando un éxito el horneado de gráficas
Estoy por sumarme a esta revolución, solo por probar.
Tengo ahí tirada una Geforce FX 5700VE de 256Mb con artifacts y demás problemas al pincharla en un equipo, no es que me sirva en exceso ni que sea una buena gráfica, pero por probar…
¿Creéis que podría funcionar con esa gráfica?
¡Saludos!
>> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
>> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
>> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W -
This post is being processed/translated. The original version will be shown:
Jajajaj Kynes, contento eh.
Como te sientes? Es una sensación rara verdad que si? Yo cuando puse la gráfica y vi que funcionaba no me lo creía…
Espero que nos dure el apaño!!
Por cierto, le pusiste queso?? :risitas:
No ara en serio, pusiste el calor de arriba y abajo o solo de abajo o cómo? El de arriba en mi horno es como unas barras de hierro que se ponen al rojo vivo, es el gratinador.
Saludos!!
-
This post is being processed/translated. The original version will be shown:
Mi horno tambien tiene barras radiadoras arriba y eso da miedo meter la gráfica podriais poner fotos de como lo haceis ¿no? XD
-
This post is being processed/translated. The original version will be shown:
Yo lo que hago es lo siguiente:
Pongo papel de plata en la bandeja del horno
Hago 4 bolitas de papel de plata lo suficientemente gruesas para que la gráfica no toque la bandeja directamente, sino que haya un hueco entre bandeja y gráfica.
El horno precalentado sin gratinador (30min) a 190ºC abro meto la bandeja con la gráfica y cierro.
Espero 7 minutos y le doi al gratinador 2 minutos para que le de más calor por encima.
Abro el horno y saco la gráfica, la dejo enfriar 20 minutos y a jugar.:pSaludos!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse