Help problem with Asus P8P67 LE motherboard
-
Try to mount the board with the micro only (heatsink also obviously)
Without memory and without graphics, just board + micro.There it should already beep something…
Regarding the pins that you just commented... there have been cases of boards that have arrived from the store with bent/broken pins, they can be corrected manually if they are not broken, but it is best to contact the store so that they take action.
Greetings
-
- 10
RMA strips and point that like straightening a pin you blow it up then you eat the board with potatoes and no salt :nono::nono:
and if it can be because of that the pc didn't start up
- 10
-
- 10
RMA strips and point that like straightening a pin you screw it up then you eat the board with potatoes and no salt :nono::nono:
and if it can be because of that the pc didn't start up
Indeed that's what it is, the only danger is that the same thing happens to him as to Rules when he tried to pull an RMA with the ASRock… :vayatela:
- 10
-
¡Esta publicación está eliminada! -
-
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
This post is being processed/translated. The original version will be shown:
si devuelves la placa es mejor que digas que no funciona, y no que tiene los pines doblados, te pondran menos pegas seguramente.
-
This post is being processed/translated. The original version will be shown:
yo tengo la p8z68-v de asus tmb y el tema de los pines q comentas a mi tmb me pasa, aunq mi único problema esq al poner los 4 módulos de ram en sus latencias (6-8-6-24) el pc arranca y antes de mostrar la bios se apaga y vuelve a iniciar, eso es debido a un sistema de protección cuando detecta q algo no está correcto, aunq con 2 módulos funciona bien y solo falla con 4, prefiero no arriesgarme y puesto q todo funciona ok menos eso, tengo tengo las cuatro con sus latencias a 2133Mhz 9-9-9-26 1,5v xq me pondrán pegas con la placa, en pccomponentes no son ni 1 ni 2 casos así de modo q prefiero dejarlo estar a tener q enviar el pc y q me lo devuelvan = para mientras tanto no poder trabajar…
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse