Test of the Real Nvidia Gtx Titan, single-sli-tri Sli, 4 WAY SLI
-
Set the titans to sli at 1320 and show me what result you get at 1.21v… Keep in mind that the afterburner hasn't come out for the ti yet, and that the modders are tinkering to find the key. If you didn't have your titans at 1.40v, you wouldn't get that result even if you were joking, lol... By the way, be careful and don't mess them up, because I wonder if the guys at EVGA will get tired of sending you new ones in rma, lol...
I've already improved that Conan result. I'm fine-tuning more and today or tomorrow I'll show you one that's better than yours...
Another hug..
I already compared them and they gave more or less the same. A +/-1% that falls within the same error of the bench.
When I say clocks, it's clocks…including the memory. Of course the TITAN can't do 8000 of memos. But if you equalize the bandwidth and core, they give the same.
And don't cheat again, I'm not new to this..and no matter how much you fine-tune, you can't get more than 1000 points in xtreme with the same clocks...;) that's not a matter of fine-tuning...it's a matter of needing to get to 1450MHZ..
Regards.
P.D.
Vmanuel...sincerely..I didn't expect this from ti.No I don't know if you're in the mood to lie today or if there are people behind you lying...but please don't lie anymore...I'm VERY DISAPPOINTED with you..:( I didn't think you were like this...
-
I've already compared them and they gave more or less the same. A +/-1% that falls within the same error of the bench.
When I say clocks, they are clocks…including memory. Logically the TITAN can't do 8000 of memos. But if you equalize bandwidth and core, they give the same.
And don't cheat again, I'm not new to this..and no matter how much you refine, you can't get more than 1000 points in xtreme with the same clocks...;) that's not a matter of refinement...it's a matter of that they need to get to 1450MHZ..
Regards.
P.D.
Vmanuel...sinceramente..no me esperaba esto de ti.No I don't know if you've decided to lie today or if there are people behind you lying...but for favor.No lie anymore...I'm VERY DISAPPOINTED with you..:( I didn't think you were like this..
They can't give the same, ELP, for obvious reasons of the core itself.
Right now what limits the 780ti I tell you are the volts. That's why the 1320 are not real, because it lacks juice and throttles yes or yes, or it hangs directly…
You're made a hatchet, no one can pull the wool over your eyes... Anyway, now the day of the particular innocents is over.
The next bench I hang up you can check that it is real real...
A hug and don't disappoint, I'm good people and a joker... You have to have more sense of humor!!!
-
You can't give the same thing, ELP, for obvious reasons of the core itself.
Right now what limits the 780ti I tell you are the volts. That's why the 1320s are not real, because it lacks juice and throttles yes or yes, or it just hangs directly...
You're made of steel, no one can pull the wool over your eyes... Anyway, now the particular April Fool's Day is over.
The next benchmark I post you can check that it's real real...
A hug and don't be disappointed, I'm good people and a joker...
And I making plans to go to your house to see "that"... :troll:
-
And I making plans to go to your house to see "that"… :troll:
But you're also here???
Are you going to chase me like the inquisition here too???
What have I done to deserve this???
Don't worry, come to Galicia and I'll show you everything... Well, everything, no, because you might get dizzy...
;D
-
Son dos gtx 780 hardmodeadas…
I had noticed the back and when I saw red it seemed like the whole PCB was the same, although I see that the front is different.
regards
-
I had looked at the back and when I saw red it seemed like the whole Pcb was the same, although I see that the front is different.
regards
It's normal, it's a photo with a lot of cropping.
-
ELP3 now you will have competition unless you come up with it too;D launch date December 9th.-
.jpg)
Features:
- High performance evaporation cooler for competitive overclockers
- Modern, unique design with copper core allows for easy temperature regulation
- Built-in temperature probe slot near contact surface
- Compatible with both Liquid Nitrogen LN2 as well as Dry Ice CO2(s)
- Includes premium thermal grease
Technical data:
- capacity: 190mL
- weight (empty): 1.55kg
- operational range: -196°C to +80°C
Enclosed:
- EK-SF3D Critical Point /w pre-installed G80 mounting plate
- Additional mounting plates: HD7970 (R9 290X), GF560, G92, G200
- universal backplate
- mounting screws
- Gelid GC-Extreme 1.5g thermal grease
- allen key 2mm
Saludos.-
-
ELP3 now you will have competition unless you come up with it too;D launch date December 9th.-
Features:
- High performance evaporation cooler for competitive overclockers
- Modern, unique design with copper core allows for easy temperature regulation
- Built-in temperature probe slot near contact surface
- Compatible with both Liquid Nitrogen LN2 as well as Dry Ice CO2(s)
- Includes premium thermal grease
Technical data:
- capacity: 190mL
- weight (empty): 1.55kg
- operational range: -196°C to +80°C
Enclosed:
- EK-SF3D Critical Point /w pre-installed G80 mounting plate
- Additional mounting plates: HD7970 (R9 290X), GF560, G92, G200
- universal backplate
- mounting screws
- Gelid GC-Extreme 1.5g thermal grease
- allen key 2mm
Saludos.-
And that thing what the hell is..??? a portable LN2 kit?
They don't know what to invent anymore lol…
Patagonico, I don't care...I enjoy playing, that's for sure, always at maximum and 60 stable fps. I think that for what I have paid it is fair to have that minimum requirement. The rest doesn't matter to me..in fact, you learn and stabilize the equipment more by playing all kinds of games than just benchmarking.
Best regards.
-
And that thing what the hell is..??? a portable LN2 kit?
They don't know what to invent anymore lol…
Patagonico, I don't care...I enjoy playing, that's for sure, always to the fullest and 60 stable fps. I think that for what I have paid it is fair to have that minimum requirement. The rest I don't care..in fact, you learn and stabilize the equipment more by playing all kinds of games than just benching.
Best regards.
I totally agree but it's always fun to do a bench to see how far the card goes ;D
Especially now that 4K monitors seem to be within reach at least in 24" and 27" it's always good to have plenty of power.
Best regards.
-
I totally agree but it's always fun to do a bench to see how far the card goes ;D
But now that 4K monitors seem to be aimed at least at 24" and 27" it's always good to have plenty of power.
Best regards.
For a 24" 4K..better you stay as you are..
The minimum required for that resolution on a monitor should be more than 30" and no more than half a meter…and I'm not saying this just to say it,it's that I've tried it.
Already at 1 meter away from viewing,there is no difference at all with a 1600p.
Best regards.
-
For a 24" 4K.. you'd better stay as you are..
The minimum required for that resolution in a monitor should be more than 30" and no more than half a meter…and I'm not saying that just to say it, it's that I've tried it.
Already at 1 meter away from viewing, there is no difference at all with a 1600p.
Best regards.
I have the 27" at 70 cm and I think the 24" is big, I could put it at 40 cm as well, until it arrives in my country it will be 3 months after its launch but as the economy is going, surely one will fall into my house in 2014.
So these Dell monitors will be super tested
although I want to see what the 28" offers and in the meantime I save the difference for the Maxwell.Best regards.
-
fjavi…
Apparently, you already have bios for your little monster:
skyn3t-3A-GB-rev4.zip 131k.zip file
Look for it, it is designed for the WF rev.02 B2 from Gigabyte specifically.
Regards.
-
I'm flying with the skyn3t rev2 bios set to 1006Mhz on the Sli.
What bios do you have set on your titans?Regards
Sent from my GT-N7100 using Tapatalk
-
I'm running the skyn3t rev2 bios on my Sli at 1006Mhz and it's going like a dream.
What bios are you guys running on your titans?Regards
Sent from my GT-N7100 using Tapatalk
I have the same one but the one that lets you run it at 928MHZ.
I have it mainly because it's the only one that lets you have a total TDP of 450W. A power consumption that the graphics card will definitely hit if you overclock it past 1400MHZ with a lot of voltage.
I think the techinferno bioses are more balanced, but you can't overclock them as much as the skynet ones. Because the maximum TDP is lower.
Regards.
-
fjavi…
It seems like you already have bios for your little monster:
skyn3t-3A-GB-rev4.zip 131k.zip file
Look for it, it is designed for the WF rev.02 B2 from Gigabyte specifically.
Best regards.
That's the same one I saw a few weeks ago and it's not working for me, it works but it doesn't maintain the voltage and it fails.
I've tried editing mine but it won't let me touch power target, also I see that it comes with a maximum boost of 1293, that I can touch and raise it more but if I can't raise power target and voltage it's useless, I saw another bios from EVGA and it does allow editing power target but in mine it comes blocked and maybe that's why they haven't released it yet, but it says that with the 3A bios it gives some failure, there's also a quote from someone with the WF rv2 and it doesn't respond.
If I download a reference bios from gigabyte it lets me modify power target, but in the customized ones it doesn't
Thanks anyway.
Best regards
-
I'm using the skyn3t rev2 bios on my Sli at 1006Mhz and it's going like a dream.
What bios do you have installed on your titans?Regards
Sent from my GT-N7100 using Tapatalk
I have the same one, because it allows you to increase the TDP a lot... Whatever you do is your own responsibility.......xD.
Cheers…
-
Look at the Jotole that knows how to ocear and everything..;)
Who has taught you?
Haha...
We need to upload more memos, this test is pure bandwidth. But the core is fine.
A hug.
P.D. Fjavi, they said that this was the bios of the Gibayte WF rev0.2.. I don't know what could have gone wrong, anyway if all you need is more TPD, edit it yourself.
A hug.
-
Look at the Jotole that knows how to ocear and all that..;)
Who taught you?
Haha...
We need to upload more memos, this test is pure bandwidth. But the core is fine.
Hugs.
P.D. Fjavi, they said that this was the bios of the Gibayte WF rev0.2..I don't know what could have gone wrong, but if all you need is more TPD, edit it yourself.
Hugs.
I would need the PT and more voltage, I don't know but in this message I understand that he had to remove it and put the original one.
Hi,
I got a Gigabyte GeForce GTX 780 3GB OC Windforce rev2.0 but the bios version on it is: 80.10.3A.00.32, do you know why it is like this? I bought the card 1 week ago.
I tried the rev 4 of vBios but every time I tried to benchmark it, the clock went back to stock 1006Mhz.
So I went back to the original bios from the backup file.
Should I use the: Gigabyte.GTX780.3072.130516WF-PT+VOLT-BD.rev2 instead? Even that I have a rev 2.0 card?My English is bad, that bios rv4 is 80.80 which are the B1, mine is 80.10.3A.00.2C, but I can't edit the voltage or the power target, seeing the one from Skyn3t, I see that he has voltage up to 1.21v, but I don't know with what he edited it.
I also don't think I'll get much with my equipment, it's already a bit short, Windows doesn't detect the frequency well.
Subefotos.com - Share your photos quickly
Let's see trying the one from Skyn3t.
regards
-
Look at the Jotole that knows how to ocear and all that..;)
Who taught you?
Haha...
We need to upload more memes, this test is pure bandwidth. But the core is fine.
Hugs.
P.D. Fjavi, they said that was the BIOS of the Gibayte WF rev0.2.. I don't know what could have gone wrong, but if all you need is more TPD, edit it yourself.
Hugs.
Hahaaaa, I've had good teachers…..
Although I learn pretty fast............;).
Let's see the 290, that cheap point if it gets close to it… ;).
-
Jajajajaaa, he tenido buenos maestros…..
Aunque aprendo bastante rapido............;).A ver la 290 esa del cutre point si se le acerca… ;).
No solo las 290…sino alguna mas de Nvidia..;)
Como suben las condenadas cuando das voltaje...y porque el ancho de banda en esa prueba es fundamental.Si se pudieran poner las memos a 8000MHZ,como hay gente por ahí que puede tocar el voltaje de las memos con bios creadas a medida,la puntuación sería bastante mejor aún.
Un saludo.
