Riding an old glory, K6-2 in AT case

[Sylver]

Evil plugged in, that box is a marvel, having it brand new at this point is a success that is hardly repeatable :eoh:
You don't know how lucky you are

Congratulations on the project, I follow it closely and I join as a possible participant in others like it, which won't be for old material…

Best regards!

[amd125]

Very good project. I have never thought of building something similar, that time was special for me because I was poorer than a rat :ugly: and I could never have a decent PC, I was always using old second-hand PCs. Congratulations on what you have achieved.

[Yorus]

Thanks again, let's see if new things start arriving and I continue, besides, with this heat it's very tiring.

Sylver, if there are no new news yet, there must be 7 more boxes like this. Another thing is the price, but they are for sale to the public.

[Tecnho]

How great I love these threads already tell me how it is returning to wolfenstein thanks for the time I have been playing counter strike for a few days using simulator

[cobito]

I have always wanted to revive my old PCs, if only for the pleasure of seeing them work. I have most of the parts stored in boxes. Recently, I dusted off a portable Pentium 2, installed Windows 98 and Half Life. And the truth is that for a decent graphics, it worked pretty well. The only problem is that Windows 98 does not have a tool to connect the wifi and I cannot connect to any network.

As soon as I have time, I will give it some attention and take photos and videos.

[Yorus]

Thanks! :sisi:

Cobito, I remember your thread, but I have no idea how to solve that. I'll keep my 98SE separate from the network, I don't want to risk anything sneaking in there and it will probably give me more problems than benefits. Anyway, if I needed it occasionally, I have a realtek network card around that were very popular, I don't remember if it was the 8139 or something like that, but it was precisely the one I used at the time.

To transfer programs, I think I'll end up using a pendrive, although I'm missing the extender for the board's USB, but I can always use the PCI USB card if I find the drivers. I would transfer everything from MS-Dos from Windows 98SE. Another possibility is to use an IDE/Compact Flash adapter and use a CF I have around. I've seen that there are adapters that go to the back of the computer (bracket) so you don't have to open the case to get the CF out. But well, these are musings and I will probably use USB (I have a generic driver for external drives already tested) or a rewritable CD, I still use optical drives, hehe.

[Yorus]

Some small changes. From now on I will only post the process here in the forum. By the way, the images are now hosted on TinyPic instead of on Wordpress.

[Yorus]

This is going drop by drop. This morning the H2M forum member told me he had just sent me the port extenders, but at mid-morning I received the mouse:

It's curious to see the drivers on a floppy disk like in the old days, and even more so that it comes with a kind of hard plastic mat. We'll see how it goes:

The belly of the beast…

And to take advantage of the shipping costs, I decided to get this little toy, cheaper than on Steam and compatible with Windows, Linux and Mac:

[hAyO]

In the end I took it out of the closet, and the surprise is that it started up on the first try!!!

AT Tower, AT motherboard with VIA chipset, Pentium MMX 166Mhz, 64Mb SDRAM, S3Trio V2 1MB, HDD 10Gb, Windows 98SE, and SoundBlaster 128PCI.

[Yorus]

That team is good for playing old glories :sisi:.

If you were to use it for MS-Dos, an ISA sound card would be better, preferably a genuine Sound Blaster Pro, 16, AWE32 or AWE64, not cloned ones. For playing with 3D, something more powerful can be used, but it is more than good for the Windows 95 era.

How cool it is to take a machine with decades on its circuits and it works without problems, right?

[hAyO]

The thing is that from a course I did, they gave me a 10Gb hard drive at most, I thought I had Windows 2000 installed, I'm talking about the year mmm 2010 I think it was the last time I touched it, and I thought I had that, I started up and it turns out that I installed Windows 98SE xD and I'm missing drivers and stuff. Not for gaming but if I can find a 4mb graphics card even if it's not too bad for me to support the native resolution of the monitor (1280x1024), since it's the 17" one. And for gaming I would use emulators, at home we practically haven't used MS-DOS, we entered Windows 95 OSR2, and we only used the startup disk to install the system.

The truth is that it has surprised me pleasantly, the best part is that I have a socket7 motherboard lying around that I'm not sure if it will work and I could try with some processor I have around.

[Yorus]

Well, we continue with the task.

At the moment I am encountering some problems, all derived from the storage units:

• Since I do not have any computer with a floppy drive, I have to have the floppy disks in image format (img) and I have had to create the floppy disks with a USB floppy drive, but this does not seem to be very fine because they always fail when booting and even corrupt files. For the moment I have solved this by finding a bootable CD of MS-Dos 6.22.
• The MS-Dos CD did not boot with the ATA100 controller, although until now different Linux and Hiren's Boot had done it for me. For the moment I have connected everything to the ATA33 controller integrated on the board and it is already working.
• The 80Gb hard drive has problems being detected by the controller on the board, so I have changed it for another similar 60Gb one and it does not give problems.

So for the moment I have managed to install MS-Dos, but because of the storage problems I have to do tricks to simply install the CD-Rom drivers or the sound card. I think I am going to get a new USB floppy drive since the one I used was from my job and had too much trouble.

[J_JuMp]

What a beautiful post!! I hadn't been back to these parts for many years, I love seeing that it's still active and with such beautiful projects

The 3.5" floppy drives, when they got a bit of a strong shake, the magnetic "went out of alignment" and it read/wrote where it wasn't... that's what has happened to your USB drive (or the internal one), that if you format the floppy in a misaligned one it will work in that one but not in a well-aligned one, and vice versa...

Regarding the HDD issue, there was a limitation by jumper of the capacity of hard drives to 32Gb, but it was a limitation of the BIOS that doesn't affect your motherboard...

Good luck with the project, I hope to see an update soon!

[whoololon]

I don't know if it's cheating but, what if instead of MS-DOS 6.22 you put FreeDOS 1.1? More for the drivers than anything else.

Edit: sorry, but if I don't put it I'll explode.

!
The marks are from the tape with which I attach it to a piece of foam rubber to preserve the connectors.

[Clipper]

Hello interesting project
what do you need this for?

http://uk.rs-online.com/largeimages/F0828296-01.jpg
if so I have a couple of them in the storage room that I could give you for free
best regards

[Yorus]

First of all, I'm sorry for the delay in responding, the beach, beers, good company, and bad habits were calling out to me :troll:

@J_JuMp:

What a beautiful post!! I hadn't been back to these parts for many years, I love seeing that it's still active and with such beautiful projects

The 3.5" floppy drives, when they got a bit of a rough shake, would "misalign" the magnetic field and read/write where they shouldn't... this is what happened to your USB drive (or the internal one), if you format a floppy on a misaligned drive it will work on that one but not on a properly aligned one, and vice versa...

Regarding the HDD issue, there was a jumper limitation on hard drive capacity to 32Gb, but it was a BIOS limitation that doesn't affect your motherboard...

Good luck with the project, I hope to see an update soon!

Hello!, I actually remember your username from when I started on the forum, because you've been registered longer than I have, I imagine you weren't around during the Ngasis era by much.

I need to update things I've already done, and one of them is to send the USB floppy drive to the wind and use an old Dell laptop with a floppy drive and Windows 2000 that has been running smoothly for formatting diskettes and being able to exchange data with the K6-2.

I'm not sure what's up with the hard drive, but since the 60Gb one I put in works perfectly, I'll leave it that way.

@whoololon:

I don't know if it's cheating, but what if instead of MS-DOS 6.22 you put FreeDOS 1.1? More for the drivers than anything else.

Edit: sorry, but if I don't post it I'll explode.

!
The marks are from the tape with which I secure it to a piece of foam to preserve the connectors.

I understand that FreeDOS might cause problems with some games, but if I can get everything to work, I might consider trying it in version 2.0 of the project.

Was that K6-2 the one you used back in the day?

@Clipper:

Hello interesting project
what do you need this for?

http://uk.rs-online.com/largeimages/F0828296-01.jpg
if so I have a couple of them in the attic that I could give you
regards

Hello!. Thank you very much for the offer, for now I have a serial mouse, although it doesn't quite convince me how it works. If I finally switch to PS/2 I could try it, although I'm not sure if it will cause any problems with the mouse drivers.

[JuezDred]

I think I have something for that team somewhere. I'll look into it and let you know.

[Yorus]

Let's see if I can get back to it, because between summer getaways, the imminent return to work, and setting up my 2nd PC with the Xeon, I haven't touched it. And the heat from 3 computers and a NAS is a small room!, hehe.

[JuezDred]

For winter it will be fine fine.

[Yorus]

In winter is where you feel best, without a doubt.