cpu does not turn on with just a hair dryer

[nightcode1]

my pc only turns on with a hairdryer the only strange thing I see is the state of this pc will that be it?

[Sylver]

@nightcode1 I wouldn't know, but it's true that there is some corrosion apparently on the underside.

If that has leaked from the top, it's possible that there is much more below the PCH itself.
But I suppose it could only be found out by desoldering the PCH, which I wouldn't do obviously because of the risk it entails.

Regards

[_Neptunno_]

That Mobo looks bad, it's better to look for a similar one second-hand or on Aliexpress. From what I see it's worth about 30-35€, but if you look well you can find a similar socket 1155 motherboard for 20-25€. I'm not saying it can't be repaired, but it looks like it's complex and you end up spending money that may not be worth it. Best regards!!

[nightcode1]

@_Neptunno_ today I sent it to the technician to see if they can save it and if not then plan b is to buy another gigabyte h61m-s1 board will there be a similar one or will the h61m-hd2 be better?

[nightcode1]

@Sylver said in cpu does not turn on with just a hair dryer:

@nightcode1 I couldn't tell you, but it is true that there is some corrosion apparently on the bottom face.

If that has leaked from the top, it is possible that there is much more underneath the PCH itself.
But I suppose that it could only be found out by desoldering the PCH, which I wouldn't do obviously because of the risk it entails.

Regards

look at how the pch looks from below right at the stain

[Sylver]

@nightcode1 it will be difficult to find another one like it, because it has been discontinued for over 12 years.

We have already seen the corrosion spots underneath, as you mentioned, Mr. @_Neptunno_ it doesn't look good.
Let's hope there is luck and you can fix it for little money.

Regards

[_Neptunno_]

@nightcode1 said in cpu won't turn on with just a hair dryer:

@_Neptunno_ today I sent it to the technician to see if they can save it, and if not, then plan B is to buy another gigabyte h61m-s1 motherboard. Will there be a similar one or is the h61m-hd2 better?

Honestly, the cheapest one you can find. I think the H61M-HD2 has some improvements in the graphics chip's connectivity, the network card is different (not sure if better or worse) and not much else. But don't complicate yourself, I understand that you want to spend as little as possible, so stick to the most affordable 1155 motherboards and you can stretch the PC a little more.

Best regards!!

[nightcode1]

@_Neptunno_ said in cpu does not turn on with just a hair dryer:

@nightcode1 said in cpu does not turn on with just a hair dryer:

@_Neptunno_ today I sent it to the technician to see if they can save it and if not, then plan B is to buy another gigabyte h61m-s1 board. Will there be a similar one or is the h61m-hd2 better?

Honestly, the cheapest one you can find. I think the H61M-HD2 has some improvements in the connectivity of the graphics chip, the network card is different (not sure if better or worse) and not much else. But don't complicate yourself, I understand that you want to spend as little as possible, so stick to the most affordable 1155 motherboards and you can stretch the PC a little more.

Regards!!

Right, that's the one they're selling me new or at least that's what the person says. The technician checked the motherboard I mentioned at the beginning, changed the RAM, disk, power supply, and they gave it a wash, but the motherboard still doesn't respond. He tells me that possibly I should buy a new one because this one doesn't work anymore. But what I can't get out of my mind is why it doesn't work because with the hair dryer it turns on and works normally without any issues?

[Sylver]

@nightcode1 it's rare that you're sold "new" a board that was discontinued a decade ago, but it could be a unit that wasn't sold at the time and has been in a warehouse all these years without being used, although I must say that I find it extremely rare.
Those things don't usually happen.

Regarding the problem with the board itself, it does have some damage, that's undeniable. It doesn't mean it's no longer useful, but what we know is that it only works using a hair dryer, because of that damage.

Regards

[nightcode1]

@Sylver said in cpu doesn't turn on with just a hair dryer:

@nightcode1 it's rare that they sell you a "new" motherboard that was discontinued a decade ago, but it could be a unit that wasn't sold at the time and has been in a warehouse for all these years without being used, although I must say that I think it's extremely rare.
Those things don't usually happen.

Regarding the problem with the motherboard itself, it does have some damage, that's undeniable. It doesn't mean it's no longer useful, but what we know is that it only works using a hair dryer, because of that damage.

Best regards

I thought the same thing, with, regarding the motherboard he told me it was new and unused because they bought it and never used it he sent me photos to see it and if I wanted to try it out in person I'm willing to take the risk obviously after trying it out if it works correctly I'll make the payment it's that hd2. there's another model that's also for sale which is used it's an h61m-vs

[Sylver]

@nightcode1 as long as it can be proven to work, perfect.

You will already tell us the outcome

Greetings

[nightcode1]

@Sylver said in cpu won't turn on with just a hair dryer:

@nightcode1 as long as it can be proven to work, perfect.

You'll let us know the outcome

Best regards

xD I just hope that outcome has a happy ending

[nightcode1]

@Sylver said in cpu does not turn on with just a hair dryer:

@nightcode1 as long as it can be proven to work, perfect.

You will tell us the outcome

Regards

I come to tell the outcome

the technician performed a second cleaning on the board, let the board rest and then assembled it and it turned on normally, I am super happy, everything works normally ? I want to thank everyone for supporting and responding with their ideas

[Sylver]

@nightcode1 Wow, positive surprise, I'm very happy that in the end it came back to life without any major problems.

Enjoy it again

Best regards