3dfx Voodoo 5 6000 + i7 2600k

[Tecnho]

Very overdone everything, just the way I like it, what people.

[Sylver]

Vaya montaje :risitas:

I would like to do experiments like that, how fun it must be…
Does battlefield 3 move?

[Fassou]

Despite its four processors, the performance with all the OC it has, is that of a GF4 MX400 :verguen:

Salu2!

[Nemo]

@Fassou:

Despite its four processors, the performance with all the OC it has, is that of a GF4 MX400 :verguen:

Salu2!

And what does it matter!!! if only because it works it is already a success :risitas: What a mess of inventions that bored people make :risitas:

Un saludo

[Bm4n]

@packosoft:

it seems that they were the first graphics with external power supply (a bit rudimentary, though)

I mean that it came with that, milk

[krampak]

The jewel in the crown, that and the prototypes of the Rampage that ended up coming out I used to be fond of collecting 3dfx models, starting with the Voodoo2 3000 that I had (I still remember NFS2 Special Edition with Glide3D and my mouth waters xD), some banshee, voodo1/2/3/5 but I never had the 6000, the few that were seen on eBay were at exorbitant prices, undoubtedly a beautiful graphics card.

Edit: If I remember correctly, there were 2 models of 6000, one with the 2 to 2 cores (less elongated) and then the one you have shown.

[_Neptunno_]

What a graphic gem and even more so for its time…the truth is that it was the GTX590/HD6990 of the era, at least in terms of size :chuckles:

What leaves me amazed is the AGP to PCI and from this to PCI_E adapter, my goodness.
To say that AGP has died :p:D and who would have said that an i7 2600k could pair with an AGP graphic, wow!!

Regards!!

[amd125]

Few graphics have given me more satisfaction than my Monster 3DFX II with 8 megs. It only supported 800*600 unless you did SLI and it could handle 1024 but those were other times. Seeing the first and second Quake or the first Half Life move with those graphics was amazing.

It was an era when it was normal to have a computer with a crappy graphic card from the S3 brand and similar, but when you had a 3DFX the change was enormous. Then Nvidia caught up with the TNT 2 and 3; and when they reached the 3 series they started to get ahead. There was also Matrox but they didn't get along too well with 3D, and even Intel released a graphic card that was a total mess :nono:

The 3DFX only supported 16 bits of color depth, but who cared about that?

I get nostalgic sorry for the off topic

By the way the Voodoo 6000 came out already dead to the market. It was almost not found at the time because 3Dfx was already dying and it really didn't make sense to buy a card like that, but dual models like the 5500 were found more easily.

Watch out with the power supply only for the graphic card jajaja http://www.hwp.ru/Technologies/Voodoo.4/Voodoo5-6000bp.jpg

[cobito]

Well, times have certainly changed. My first proper graphics card was a Voodoo 3 3000 with 16 mb, replacing an S3 Savage with 8 mb. The difference was enormous. It's a shame it broke.

As for the invention, the PCI bus must be quite a bottleneck, right?

[Tecnho]

Hey if anyone wants to build a retro PC I'll give away a voodoo that I have at home XD that is, you can already post some photos or a video of how the thing is going XD.

[amd125]

@Tecnho:

Oye si alguien quiere montar un retro pc yo regalo una voodoo que tengo por casa XD eso si ya puede colgar unas fotos o video de como va el trasto XD.

Habla con Yorus

Montando un equipo retro - Athlon XP - HardLimit

[incrediboy]

I find it strange that no one has noticed yet... he has put giant heat sinks on processors and memories, and then leaves the hint chip exposed without any heat dissipation? Someone should remind the owner of this one where almost all Voodoo 5 600s broke :vayatela:

[Sylver]

@cobito:

Well, times have certainly changed. My first proper graphics card was a Voodoo 3 3000 with 16 mb, replacing an S3 Savage with 8 mb. The difference was huge. It's a shame it broke.

As for the invention, the PCI bus must be quite a bottleneck, right?

+1
It was my first card too, and I had a hard time finding the drivers for Windows XP…

I still have it around, I remember it was passive and I put a chipset cooler on top of the heatsink to dissipate the heat dissipated... me and my apprentice experiments :risitas:

Best regards

[cobito]

@Sylver:

+1
It was also my first graphics card that same, and it took me forever to find the drivers for windows XP…

Now that you mention it, I was never able to get it to work well on Windows XP. I had a partition with Windows 98 SE for gaming and Windows XP for everything else. lol how time flies!

[Sylver]

Yes, it crashed, until my cousin got me the drivers for XP in the infinite saint, I don't know where he got them from xD
In Windows 98 I played borrowed Quake II, carmageddon, tomb raider… with a 4Mb S3, what a madness... :risitas: and of course how time passes... it reminds me of yesterday :llorar:

[incrediboy]

This post is being processed/translated. The original version will be shown:

@Sylver:

Si, daba pantallazos, hasta que mi primo me consiguió los drivers para XP en el santo infinito, no sé de donde los sacó xD
En windows 98 jugaba de prestado al Quake II, carmageddon, tomb raider… con una S3 de 4Mb, vaya locura... :risitas: y desde luego que vaya como pasa el tiempo... me recuerda a ayer mismo :llorar:

yo saque los drivers de mi vodoo 5000 en la web guru3d… has probado a buscar ahi?

download from Guru3D.com

[Sylver]

This post is being processed/translated. The original version will be shown:

Hombre, ya como que no me hacen falta pero gracias tio, por si la rehabilito o la vendo ya lo sé :sisi:
Creo que tengo aún el CD por ahí con los drivers buenos, pero creo que el problema era el hecho de ser la Voodoo 3 3000, para el resto de Voodoos si solían haber controladores, pero para esa en concreto estaba chungo de cara al windows XP.

[osckhar]

This post is being processed/translated. The original version will be shown:

@incrediboy:

me parece raro que nadie se diera cuenta aun… ha puesto unos disipadores gigantes en procesadores y memorias, y luego deja el chip hint al descubierto sin disipacion alguna? alguien deberia recordarle por donde cascaban casi todas las vodoo 5 600 al propietario de esta :vayatela:

Buenas,

La disipación en la V5-6000 es complicada. Aunque veais ambos disipadores deciros que en la parte frontal solo disipa los 4 procesadores VSA-100 pero no hace contacto con los chisp TSOP sdram. En la parte trasera pasa tres cuartos de lo mismo. Se pegaron 4 mini dispadores en la parte trasera justo en cada núcleo de los VSA-100. Debido a las diferentes altruras que hay entres SMD , resistencia y CHIPS es imposible hacer un disipador casero que haga contacto con los componentes que se desean disipar.

Lo curioso de esa tarjeta no es tanto el sistema de refrigeración, o que funcione en placas de última generación con ayuda de diferentes adaptadores, sino que la placa se modificó via HW con memorias TSOP de 3.5ns cuando de serie vienen con 6ns. Esto hubiera permitido un excelente O/C si 3Dfx hubiese configurado la CPU / MEM asíncronamente, pero vienen sincronamente y eso quiere decir que si subes los MHz de la memoria subes los ciclos de reloj del VSA-100.

Tienes razón se nos olvidó disipar el CHIP HINT, y como bien apuntas, muchas de las 6k mueren no por su calentamiendo pero si por trabajar en placas base donde el VAgp no es el correcto y acaba matanto el SLI chip HINT.

Saludos,
Oscar.

[Bm4n]

This post is being processed/translated. The original version will be shown:

Por la diferentes alturas no será problema, hay "almohadillas" y pastas térmicas de distintos grosores.

[incrediboy]

This post is being processed/translated. The original version will be shown:

@osckhar:

Buenas,

La disipación en la V5-6000 es complicada. Aunque veais ambos disipadores deciros que en la parte frontal solo disipa los 4 procesadores VSA-100 pero no hace contacto con los chisp TSOP sdram. En la parte trasera pasa tres cuartos de lo mismo. Se pegaron 4 mini dispadores en la parte trasera justo en cada núcleo de los VSA-100. Debido a las diferentes altruras que hay entres SMD , resistencia y CHIPS es imposible hacer un disipador casero que haga contacto con los componentes que se desean disipar.

Lo curioso de esa tarjeta no es tanto el sistema de refrigeración, o que funcione en placas de última generación con ayuda de diferentes adaptadores, sino que la placa se modificó via HW con memorias TSOP de 3.5ns cuando de serie vienen con 6ns. Esto hubiera permitido un excelente O/C si 3Dfx hubiese configurado la CPU / MEM asíncronamente, pero vienen sincronamente y eso quiere decir que si subes los MHz de la memoria subes los ciclos de reloj del VSA-100.

Tienes razón se nos olvidó disipar el CHIP HINT, y como bien apuntas, muchas de las 6k mueren no por su calentamiendo pero si por trabajar en placas base donde el VAgp no es el correcto y acaba matanto el SLI chip HINT.

Saludos,
Oscar.

si que es cierto que los chips hint mueren por un vagp excesivo, pero el voltaje excesivo lo que hace es sobrecalentar dicho chip. te lo digo por experiencia, que he usado este modelo de grafica alguna vez y me ha tocado estar vigilando la temperatura del chip cint constantemente preparado para quitar la corriente si empezaba a calentarse.

sobre lo del disipador casero si que hay soluciones. por un precio razonable puedes comprarte una dremel con el accesorio de fresar, el cual puedes regular para comer material a una altura determinada y que el disipador tenga mas grosor en las zonas exactas que tocan con los chips que tu quieras.