Test of the Real Nvidia Gtx Titan, single-sli-tri Sli, 4 WAY SLI
-
12GB :fumeta: for what use, just to make the product more expensive, being so close to the maxwell that they will surely render much more.
I don't understand :wall:.-
Regards.-
The only explanation I see for that 12GB is that it's for work, in rendering and things like that, for games it's a waste and the ideal should be the 6GB, for high resolution and games it's the most balanced.
Always talking about putting in at least 2 cards.
Let me see if I can fine-tune this, it gives me a boost and it looks like a CPU, goes from 50 to 129 fps and gives the boost.
I'm going to have to format that system is about 4 years old already, I put the bios without boost and see with voltage that this promises.
Regards
-
I already have the 780, I didn't even put the driver, it picked up the ones I already had although I think I'm going to remove them, what a difference in temperature 23º on the desktop.
Very bad ASIC LOL.
regards
Do you notice much difference in performance compared to your ex-SLI of 480 oceado? 4 years without formatting? Well that's enough for you, hehe. I suppose that when you do a cleanup the difference will be even more noticeable.
-
Do you notice much difference in performance compared to your ex-SLI of 480 oceado? 4 years without formatting? Well, that's enough, hehe. I suppose when you clean up the difference will be noticed even more.
Not much difference, it runs a little better but without big differences, at least at my resolution, it seems to hold up better with filters.
I have already formatted and I don't see more performance, maybe my equipment is already limited, I didn't use that system much and although it had been a long time it wasn't bad, that's why I didn't format but since I did I haven't noticed an improvement in performance, maybe it responds a little better now.The graphics where the differences are very big is in temperature and noise, it's much cooler and quieter, with that I'm already satisfied, although it performs a little better.
I put the last one without changing the bios or increasing voltages, but I think with a little more voltage it will go over 1300 at least for benchmarking, I put this heaven because it goes all the time at 99% load on the card.
Subefotos.com - Comparte rapidamente tus fotosit's noticeable that at that frequency it already wants more voltage supply.
In games it sets itself as it comes from the factory at that frequency, in Crysis 3 I've seen it at 1135 I think, although depending on the area it goes down to 1124.
http://subefotos.com/ver/?a84c73ce3314de45bfeff6b696efe860o.jpg#codigosregards
-
The only explanation I see for the 12GB is that it's for work, in rendering and things like that, for gaming it's a waste and the ideal should be the 6GB, for high resolution and gaming it's the most balanced.
Always talking about putting in at least 2 cards.
Regards
I think the same, we have to see what nvidia says about it, at least if you want a 4K surround I don't see it, with 6 it's enough and more.-
Regards.-
-
I think the same, we have to see what nvidia says about it, unless you want 4K surround I don't see it, with 6 it's enough and more.-
Regards.-
To me a 4K surround seems crazy, if with just one 4K they will need three of those cards or more, I see more sense in working with them than if it seems there are programs that need a lot of memory.
There are also people who wanted cards like these with a lot of memory, well they use them to work and occasionally to play, the good thing is that you will be able to choose between one of 6GB and another of 12GB, the one who buys the 12GB one will be because he thinks he can get the most out of that memory, I am satisfied with 3Gb, my card won't last long enough to run out of memory.
regards
-
As a general rule, you usually run out of GPU power before running out of memory, bearing in mind that, if it's not for work, we usually change the graphics card before that happens
Best regards.
-
As a general rule, you usually run out of GPU power before running out of memory, and considering that, if it's not for work, we usually change the graphics card before that happens
Best regards.
If that's the case, with those 12Gb and more, I think the power of that card won't be able to exhaust the vram, even if they put 4.
But some people might buy it for rendering and maybe they're more interested in vram.
Best regards.
-
Well..hehe..I'm already getting the hang of water…
This is the worst TITAN I have, with only a 73% ASIC..but with voltage and temperature you can achieve everything:
6500 points of Graphics score.
1330MHZ and beating one of my 290X oced without tessellation active…that's nothing...;)
Regards.
-
It's not bad, eh? Best regards.
-
Not bad, right?…
Best regards.
Well no, not bad… although as I am not an overcloker, but a gamer, they are not going to crown me world champion in Hbwot... that is, I will be left without the ham...;)
A hug, Mr. Alkermes..
-
Well no, not bad... although as I'm not an overlocker, but a gamer, they won't crown me world champion in Hbwot... I mean, I'll be left without the ham...;)
A hug, Mr. Alkermes...
At least you'll be able to play better, that's what getting better performance is about, the Titan performs very well at that frequency, now that the GK110s can be overclocked better that's when they are worth it the most.
regards
-
You should put some photos of the assembly, mate, what voltage do you have them at? Let's see if you're going to scorch any...
Best regards
-
You should put some photos of the build dude, what voltage do you have them at? Let's see if you're going to scorch any…
Best regards
That's too much…over 1.32V..but with ASICs at 73% you can't ask for more..In the build of the rig, precisely the one with the best ASIC and the one that goes up the most, hasn't been watercooled yet.There are only 3, and on top of that the worst one is from Master.But the temps are so incredible,and the VRMs are already under control by probes, that even at 1300MHZ and 1.30V they don't exceed 50º...Thanks to Jotole for this..;)
At 1300MHZ for gaming, normally with 1.28-1.30V(depending on the game) there's more than enough.And the temps are laughable,none of them go over 35º in those conditions.
Regards.
-
That's a lot of...1.32V..but with an ASIC of 73% you can't ask for more..In the setup of the rig, precisely the one with the best ASIC and the one that goes up the most,hasn't been watercooled yet.There are only 3,and on top of that the worst one is from master.But the temps are so incredible,and the VRMs are already under control by probes,that even at 1300MHZ and 1,30V they don't exceed 50º...Thanks to Jotole for this..;)
At 1300MHZ for gaming,normally with 1,28-1,30V(depending on the game) there is more than enough.And the temps are laughable,none of them exceed 35º in those conditions.
Regards.
You're welcome, it's been a pleasure you know it. ;).
With the RL you spend….... You lower me 7 degrees, which is soon said, since I'm not lame either...........:ugly:
Mine when gaming in those conditions, are around 40/42 degrees....right now with 22 degrees ambient temp....... The VRMs when gaming still heat up less than when benching about 5/10 degrees less......... ;).
A hug...!!!
-
No problem, it's been a pleasure, you already know that. ;).
With the load you spend….... I lower it by 7 degrees, which is soon said, since I'm not limping either...........:ugly:
Mine playing in those conditions, they run around 40/42 degrees....right now with 22 ambient temp....... The VRMs playing still get less hot than benching about 5/10 degrees less......... ;).
A hug...!!!
Look.The Batman at 1306MHZ 1,30V in SLI and one for Physx.
At maximum,1600p and 8XMSAA
The one that goes to 32º is the one with the system with 2 graphics,the other,the one that "at the moment" has only one,even less..it's very difficult to see more than 35º..well,it's that I haven't seen them go over that yet..;) except in bench..and they don't even reach 40º with more voltage and more frames..
A hug.
-
Look.The Batman at 1306MHZ 1,30V in SLI and one for Physx.
At maximum,1600p and 8XMSAA
The one that goes to 32º is the one with the system with 2 graphics,the other,the one that "at the moment" has only one,even less..it's very difficult to see more than 35º..well,it's that I have not yet seen them exceed that..;) except in bench..and they also do not reach 40º with more voltage and more frames..
A hug.
How many minutes in load? what good temperatures Elp3
-
How many minutes of load? what good temperatures Elp3
The truth is that I had not been playing for more than 15 minutes..but anyway, I already said that they do not go up playing at 35º or anything like that..
They are two separate circuits with 2 D5+ 2 quadruple radiators and 16 thypon fans in an external box. Enough not to have them..;)
Regards.
-
What ambient temperature do you have?…
Greetings.
-
-
What strikes me is the 8% load that is dedicated to Physx. It is incredible how little or nothing Nvidia bothers to optimize those effects, because 8% load on a lady Titan, and more at a time when the character was standing still doing nothing seems like a mess to me, in moments with more PhysX load it would probably go over 15%.
I suppose a GTX 280/285 would fall short as dedicated to PhysX in this game…
