Script para instalar drivers de nvidia y beryl

barton

pues eso, proyecto personal

abrimos kate o gedit ( segun la distro )

pegamos el siguiente contenido:

#!/bin/bash
#comprobamos si se tiene permisos de root para realizar los cambios, de lo contrario devuelve un mensaje de aviso
if [ $UID -gt 0 ]; then
 echo ""
 echo "este script esta creado para  por barton ( bartonn3d , bart0n) para facilitar la tarea de instalar la aceleracion grafica con tarjetas graficas nvidia bajo distros basadas en ubuntu edgy"
 echo ""
 echo "se ha comprobado que  no dispones de permisos de root por lo cual este script no puede continuar."
 echo ""
 echo "teclea sudo su y pon tu contraseña para disponer de estos permisos y vuelve a intentarlo"
 echo "";
else

echo "este script esta creado por barton ( bartonn3d,bart0n) para facilitar la tarea de instalar la aceleracion grafica y beryl con tarjetas graficas nvidia bajo distros basadas en ubuntu edgy "
echo "queda liberado bajo licencia GPL para que otras personas puedan usarlo, modificarlo ,distribuirlo y mejorarlo segun sus necesidades"
echo ""
echo "#################### importante ##################"
echo "#################### importante ##################"
echo "#################### importante ##################"
echo "#################### importante ##################"
echo "" 
 echo "este script no ofrece ningun tipo de garantia por lo que solo el usuario que lo ejecute queda como unico responsable del resultado de lo que ocurra en su equipo"
echo "(yo espero que  dicho dicho resultado sea que el usurio disponga de aceleracion grafica y beryl instalado en su equipo)"
echo "" 
echo "#################### importante ##################"
echo "#################### importante ##################"
echo "#################### importante ##################"
echo "#################### importante ##################"
echo "" 

#hacemos copia de seguridad de los archivos de configuracion de las X y la lista de servers de apt

 cp /etc/apt/sources.list /etc/apt/sources.list.backup.beryl-script
 cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup.beryl-script
 echo ""
 echo "acabamos de realizar una copia de seguridad de los archivos de configuración de las X y la lista de servidores de apt"
 echo ""
 echo " estos han sido renombrados a sources.list.backup.beryl-script y xorg.conf.backup.beryl-script para poder recuperarlos si es necesario"
echo ""

 #añadimos los servers para tener disponibles los paquetes de aceleracion de nvidia
echo " ahora vamos a añadir una serie de servidores a la lista ( /etc/apt/sources.list) para poder disponer de los paquetes necesarios"
 echo ""
echo "" >> /etc/apt/sources.list
echo "###### servers añadidos por el script barton_n+b_instaler ######" >> /etc/apt/sources.list
echo "###### por favor, comprueba que estos no queden duplicados #####"  >> /etc/apt/sources.list
echo "" >> /etc/apt/sources.list
echo "# servidores para nvidia" >> /etc/apt/sources.list
echo "" >> /etc/apt/sources.list
echo "deb http://nvidia.limitless.lupine.me.uk/ubuntu edgy stable" >> /etc/apt/sources.list
wget http://nvidia.limitless.lupine.me.uk/ubuntu/root@lupine.me.uk.gpg -O- | apt-key add -

echo "" >> /etc/apt/sources.list
echo "# servidores para beryl" >> /etc/apt/sources.list
echo "" >> /etc/apt/sources.list
echo "deb http://ubuntu.beryl-project.org/ edgy main" >> /etc/apt/sources.list
wget http://ubuntu.beryl-project.org/root@lupine.me.uk.gpg -O- | apt-key add -

echo "" >> /etc/apt/sources.list
echo "# otros servidores" >> /etc/apt/sources.list
echo "" >> /etc/apt/sources.list
echo "deb http://security.ubuntu.com/ubuntu edgy-security universe"   >> /etc/apt/sources.list
echo "deb-src http://security.ubuntu.com/ubuntu edgy-security universe" >> /etc/apt/sources.list
echo "deb http://es.archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse" >> /etc/apt/sources.list
echo "deb-src http://es.archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse" >> /etc/apt/sources.list
echo "" >> /etc/apt/sources.list
echo "#### fin de la lista de servidores añadidos por el script barton_n+b_instaler ####" >> /etc/apt/sources.list

# instalamos los paquetes para tener aceleracion y activamos esta:

 echo "vamos  a actualizar el sistema e instalar los paquetes necesarios para disponer de la aceleracion grafica así como activar esta"
 echo ""
aptitude -y update && aptitude -y install linux-restricted-modules-$(uname -r) nvidia-glx 
nvidia-xconfig --add-argb-glx-visuals

echo "los paquetes necesarios para disponer de la aceleracion grafica han sido instalados y debe esta activada  "
echo""

#instalamos los paquetes necesarios para disponer de beryl

 echo "vamos a instalar los paquetes necesarios para disponer de beryl"
 echo ""

 aptitude -y install beryl emerald emerald-themes
 echo ""
 echo ""
 echo "ahora tanto la aceleracion grafica como beryl deben estar diposnibles despues de reiniciar y lanzar beryl-manager manualmente"
 echo "teclea reboot y pulsa enter para reiniciar el sistema"
 echo "teclea beryl-manager para lanzar el gestor de beryl y disponer de este"
echo ""
 echo "espero que todo haya funcionado a la perfecion y que tanto la aceleracion grafica como beryl esten perfectamente instalados en tu equipo y puedas disfrutar de ellos"
 echo ""
 echo ""
 echo "script realizado por barton (bartonn3d, bart0n) tomando como base la información proporcionada por los chicos (gracias por vuestro desinteresado trabajo ) del proyecto beryl (www.beryl-project.org) "
  echo ""
fi;

guardamos

damos permisos de ejecucion ( chmod +x /ruta/del/script/nombre_del_script )

nos logueamos como root ( sudo su + cotraseña) y lanzamos el script ( ./ruta/del/scrip/nombre_del_script )

por los drivers utilizados quizas en tarjetas "demasiado modernas" no funcione…

puede duplicar servidores en el sources.list ( no estaria de mas comprobarlo a la finalizacion del script )

tras reiniciar la maquina y lanzar el beryl-manger , beryl deberia estar disponible :sisi:
cualquier aportación /mejora será bienvenida :sisi:

Yorus

Veo que es para Ubuntu Edgy. Hace poco intenté instalar beryl, pero de momento no he conseguido nada.

kelven

Has probado con las guias que hay en el wiki ?

http://en.wikipedia.org/wiki/Beryl_%28window_manager%29

Yorus

Creo que si, aunque no recuerdo si fue esta última vez o la otra que lo intenté con Dapper. De todos modos lo añado a mis marcadores y probaré de nuevo, que no quiero quedarme sin mis efectos 3D.

ZenPiPerS

También podeis pasaros por aquí para estar al tanto de las novedades de beryl.

http://goberylgo.blogspot.com/

Un Saludo!

barton

yorus.. has probado esta guia ????

Yorus

Que va, ando escasillo de tiempo ultimamente. A ver si el finde me animo.

Yorus

Bueno, pues me ha dado por probar tu scrpt y decirte que me ha funcionado a la perfección. En el sources.list solo me ha duplicado la entrada de Beryl, por las pruebas que había hecho yo antes. Creo que mi problema estaba en utilizar los drivers de nvidia que vienen con Ubuntu.

Estoy contento, WoW en Linux y Beryl en solo una semana, jejeje.

Forenaits

Esto lo tengo que probar yo algun dia…

Yorus

El problemilla que tengo es para arrancarlo al inicio de sesión. Lo intento desde Sistema > Preferencias > Sesiones y luego yendo a la pestaña Programas de inicio y dándole a añadir y poniendo beryl-manager pero no me guarda la configuración y al siguiente inicio de sesión no me salen los bordes de ventana ni las barras de título, ya que está seleccionado Emerald como gestor de temas pero no está arrancado Beryl.

psgonza

Beryl es EXPECTACULAR…. pasas unos dias con KDE+Beryl (en mi caso) y cuando entras en windows, te deprimes xD

kelven

Hombre estoy deacuerdo de que Beryl es alucinante .. pero tambien hay un monton de programas para hacer moding a windows y dejarlo genial (ahora solo falta que saquen algo parecido al beryl para XP .. seguro q no tardan mucho ) …

Yorus

Con Vista en el mercado no se yo si alguien se va a molestar en hacer algo similar a Beryl en XP.

psgonza

@kelven:

Hombre estoy deacuerdo de que Beryl es alucinante .. pero tambien hay un monton de programas para hacer moding a windows y dejarlo genial (ahora solo falta que saquen algo parecido al beryl para XP .. seguro q no tardan mucho ) …

Cambiar el marco a las ventanas es lo de menos…. ver como "arde" (literal) una ventana al cerrarla no lo he visto nunca xD

kelven

arder la ventana .. madre mia … eso el mio no lo hace .. tengo q instalar las nuevas versiones ... ;D

Gunfett

Hola antes que nada felicitarte por el scrip que te has currado que nos ahorra muchos pasos

Bueno instale el scrip con Kubuntu edgy y tengo beryl, pero lo que no se si tengo es la targeta bien configurada. es una nvidia 6800gt y en el panel de control de KDE pone "Nvidia gforce generic" "controlador nv"

Las fotos y los videos se ven mal, como si me faltaran bits de color y no me deja poner el monitor a mas de 56Hz cuando en windows lo tengo a 70.
Tambien tengo que decir que los efectos de beryl me van bien, con el benchmark que lleva me da 1400 frames en reposo y 230 al rotar el cubo

A ver si me podeis hechar una mano que hace mucho que no me ponia con linux y no me atrevo a tocar el xorg.conf

ZenPiPerS

Gunfett posteanos tu xorg.conf para echarle un vistazo, y también sería interesante que nos postearas la salida de cat /proc/driver/nvidia/agp/status y cat /proc/driver/nvidia/cards/*

Las fotos y los videos se ven mal, como si me faltaran bits de color y no me deja poner el monitor a mas de 56Hz

Quizá te falte especificar en el kernel la profundidad

VESA driver type (vesafb-tng)  --->(1024x768-32@60) VESA default mode

Un Saludo!

Gunfett

@X24400:~$ cat /proc/driver/nvidia/cards/*
Model: GeForce 6800 GT
IRQ: 74
Video BIOS: 05.40.02.36.08
Card Type: PCI-E
DMA Size: 32 bits
DMA Mask: 0xffffffff

cat /proc/driver/nvidia/agp/status
Nada supongo que porque la grafica es pcx, he provado con pcx pci-express y nada

Y bueno la frq del monitor ya la tengo a 75 HZ que me he encontrado el mi monitor dentro del panel de control de KDE.
Aqui dejo el xor.conf

/etc/X11/xorg.conf (xorg X Window System server configuration file)

This file was generated by dexconf, the Debian X Configuration tool, using

values from the debconf database.

Edit this file with caution, and see the /etc/X11/xorg.conf manual page.

(Type "man /etc/X11/xorg.conf" at the shell prompt.)

This file is automatically updated on xserver-xorg package upgrades only

if it has not been modified since the last upgrade of the xserver-xorg

package.

If you have edited this file but would like it to be automatically updated

again, run the following command:

sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"

path to defoma fonts

FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "type1"
Load "vbe"
load "glx"
load "GLcore"
load "v4l"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
option "CoreKeyboard"
option "XkbRules" "xorg"
option "XkbModel" "pc105"
option "XkbLayout" "es"
option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
option "CorePointer"
option "Device" "/dev/input/mice"
option "Protocol" "ExplorerPS/2"
option "ZAxisMapping" "4 5"
option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
option "Device" "/dev/wacom"# Change to
option "Type" "stylus"
option "ForceDevice" "ISDV4"# Tablet PC ONLY

/dev/input/event

for USB

EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
option "Device" "/dev/wacom"# Change to
option "Type" "eraser"
option "ForceDevice" "ISDV4"# Tablet PC ONLY

/dev/input/event

for USB

EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
option "Device" "/dev/wacom"# Change to
option "Type" "cursor"
option "ForceDevice" "ISDV4"# Tablet PC ONLY

/dev/input/event

for USB

EndSection

Section "Device"
identifier "Tarjeta de v�o gen�ca"
boardname "NVIDIA GeForce FX (generic)"
busid "PCI:1:0:0"
driver "nv"
screen 0
vendorname "NVIDIA"
EndSection

Section "Monitor"
identifier "Generic Monitor"
vendorname "Samsung"
modelname "Samsung SyncMaster 710Tplus/711T/712T (Digital)"
HorizSync 30-81
VertRefresh 56-75
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Tarjeta de v�o gen�ca"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
depth 24
modes "1280x1024@60" "1280x960@75" "1280x960@60" "1400x1050@60" "1280x1024@75" "1600x1200@65" "1152x864@75" "1600x1200@60" "1024x768@60" "1024x768@70" "1024x768@75" "832x624@75" "800x600@60" "800x600@75" "800x600@72" "800x600@56" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection
Section "device" #
identifier "device1"
boardname "NVIDIA GeForce FX (generic)"
busid "PCI:1:0:0"
driver "nvidia"
screen 1
vendorname "NVIDIA"
EndSection
Section "screen" #
identifier "screen1"
device "device1"
defaultdepth 24
monitor "monitor1"
EndSection
Section "monitor" #
identifier "monitor1"
gamma 1.0
EndSection
Section "ServerFlags"
EndSection

ZenPiPerS

Lo del cat /proc/driver/nvidia/agp/status es para comprobar si tienes activado el Fast Writes y la velocidad a la que corre el agp, en tu caso pcie. Miralo en /proc/driver/nvidia o sinó directamente en la configuración del propio módulo nvidia, /etc/modules.d/nvidia que tengas descomentada una linea similar a esta:```
options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1


Comprueba también que tengas activado en el kernel la profundiad y la velocidad de refresco.

VESA driver type (vesafb-tng) --->(1024x768-32@60) VESA default mode


Que versión de xorg estás usando? 6.x? es que lo veo algo raro :S

Mi xorg.conf 7.1:

**Edit** debido a que el foro no adminte mas de 15000 letras posteo mi xorg en el siguiente post y sin el encabezado porque sinó tampoco cabe.

ZenPiPerS

<pre>
Section "Module"

This loads the DBE extension module.

Load        "dbe"   # Double buffer extension

This loads the miscellaneous extensions module, and disables

initialisation of the XFree86-DGA extension within that module.

SubSection  "extmod"
  Option    "omit xfree86-dga"   # don't initialise the DGA extension
EndSubSection

This loads the font modules

Load        "type1"

Load "speedo"

Load        "freetype"

Load "xtt"

This loads the GLX module

Load       "glx"

This loads the DRI module

Load "dri"

Load "v4l"

EndSection

**********************************************************************

Files section. This allows default font and rgb paths to be set

**********************************************************************

Section "Files"

The location of the RGB database. Note, this is the name of the

file minus the extension (like ".txt" or ".db"). There is normally

no need to change the default.

Multiple FontPath entries are allowed (which are concatenated together),

as well as specifying multiple comma-separated entries in one FontPath

command (or a combination of both methods)

FontPath   "/usr/share/fonts/misc"
FontPath   "/usr/share/fonts/75dpi"
FontPath   "/usr/share/fonts/100dpi"
FontPath   "/usr/share/fonts/TTF"
FontPath   "/usr/share/fonts/Type1"
FontPath   "/usr/lib/X11/fonts/local/"
FontPath   "/usr/lib/X11/fonts/misc/"
FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath   "/usr/lib/X11/fonts/Speedo/"
FontPath   "/usr/lib/X11/fonts/Type1/"
FontPath   "/usr/lib/X11/fonts/TrueType/"
FontPath   "/usr/lib/X11/fonts/freefont/"
FontPath   "/usr/lib/X11/fonts/75dpi/"
FontPath   "/usr/lib/X11/fonts/100dpi/"

The module search path. The default path is shown here.

EndSection

**********************************************************************

Server flags section.

**********************************************************************

Section "ServerFlags"

Uncomment this to cause a core dump at the spot where a signal is

received. This may leave the console in an unusable state, but may

provide a better stack trace in the core dump to aid in debugging

Option "NoTrapSignals"

Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence

(where n is 1 through 12). This allows clients to receive these key

events.

Option "DontVTSwitch"

Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence

This allows clients to receive this key event.

Option "DontZap"

Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching

sequences. This allows clients to receive these key events.

Option "Dont Zoom"

Uncomment this to disable tuning with the xvidtune client. With

it the client can still run and fetch card and monitor attributes,

but it will not be allowed to change them. If it tries it will

receive a protocol error.

Option "DisableVidModeExtension"

Uncomment this to enable the use of a non-local xvidtune client.

Option "AllowNonLocalXvidtune"

Uncomment this to disable dynamically modifying the input device

(mouse and keyboard) settings.

Option "DisableModInDev"

Uncomment this to enable the use of a non-local client to

change the keyboard or mouse settings (currently only xset).

Option "AllowNonLocalModInDev"

EndSection

**********************************************************************

Input devices

**********************************************************************

Core keyboard's InputDevice section

**********************************************************************

Section "InputDevice"

Identifier  "Keyboard1"
Driver      "kbd"

For most OSs the protocol can be omitted (it defaults to "Standard").

When using XQUEUE (only for SVR3 and SVR4, but not Solaris),

uncomment the following line.

Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

Specify which keyboard LEDs can be user-controlled (eg, with xset(1))

Option "Xleds" "1 2 3"

Option "LeftAlt" "Meta"

Option "RightAlt" "ModeShift"

To customise the XKB settings to suit your keyboard, modify the

lines below (which are the defaults). For example, for a non-U.S.

keyboard, you will probably want to use:

Option "XkbModel" "pc105"

If you have a US Microsoft Natural keyboard, you can use:

Option "XkbModel" "microsoft"

Then to change the language, change the Layout setting.

For example, a german layout can be obtained with:

Option "XkbLayout" "de"

or:

Option "XkbLayout" "de"

Option "XkbVariant" "nodeadkeys"

If you'd like to switch the positions of your capslock and

control keys, use:

Option "XkbOptions" "ctrl:swapcaps"

These are the default XKB settings for Xorg

Option "XkbRules" "xorg"

Option "XkbModel" "pc105"

Option "XkbLayout" "es"

Option "XkbVariant" ""

Option "XkbOptions" ""

Option "XkbDisable"

Option "XkbRules"   "xorg"
Option "XkbModel"   "pc105"
Option "XkbLayout"  "es"
Option "XkbVariant" "es"

EndSection

**********************************************************************

Core Pointer's InputDevice section

**********************************************************************

Section "InputDevice"

Identifier and driver

Identifier  "Mouse1"
Driver      "mouse"
Option "Protocol"    "IMPS/2"       # IntelliMouse PS/2
Option "Device"      "/dev/input/mice"

When using XQUEUE, comment out the above two lines, and uncomment

the following line.

Option "Protocol" "Xqueue"

Mouse-speed setting for PS/2 mouse.

Option "Resolution" "256"

Baudrate and SampleRate are only for some Logitech mice. In

almost every case these lines should be omitted.

Option "BaudRate" "9600"

Option "SampleRate" "150"

Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,

horizontal wheel to buttons 6 & 7. Change if your mouse has more than

3 buttons and you need to map the wheel to different button ids to avoid

conflicts.

Option "ZAxisMapping"   "4 5 6 7"

Emulate3Buttons is an option for 2-button mice

Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Option "Emulate3Buttons"

Option "Emulate3Timeout" "50"

ChordMiddle is an option for some 3-button Logitech mice

Option "ChordMiddle"

EndSection

**********************************************************************

Other input device sections

this is optional and is required only if you

are using extended input devices. This is for example only. Refer

to the xorg.conf man page for a description of the options.

**********************************************************************

Section "InputDevice"

Identifier "Mouse2"

Driver "mouse"

Option "Protocol" "MouseMan"

Option "Device" "/dev/mouse2"

EndSection

Section "InputDevice"

Identifier "spaceball"

Driver "magellan"

Option "Device" "/dev/cua0"

EndSection

Section "InputDevice"

Identifier "spaceball2"

Driver "spaceorb"

Option "Device" "/dev/cua0"

EndSection

Section "InputDevice"

Identifier "touchscreen0"

Driver "microtouch"

Option "Device" "/dev/ttyS0"

Option "MinX" "1412"

Option "MaxX" "15184"

Option "MinY" "15372"

Option "MaxY" "1230"

Option "ScreenNumber" "0"

Option "ReportingMode" "Scaled"

Option "ButtonNumber" "1"

Option "SendCoreEvents"

EndSection

Section "InputDevice"

Identifier "touchscreen1"

Driver "elo2300"

Option "Device" "/dev/ttyS0"

Option "MinX" "231"

Option "MaxX" "3868"

Option "MinY" "3858"

Option "MaxY" "272"

Option "ScreenNumber" "0"

Option "ReportingMode" "Scaled"

Option "ButtonThreshold" "17"

Option "ButtonNumber" "1"

Option "SendCoreEvents"

EndSection

**********************************************************************

Monitor section

**********************************************************************

Any number of monitor sections may be present

Section "Monitor"

Identifier  "My Monitor"

HorizSync is in kHz unless units are specified.

HorizSync may be a comma separated list of discrete values, or a

comma separated list of ranges of values.

NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S

USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync   30-83

HorizSync 30-64 # multisync

HorizSync 31.5, 35.2 # multiple fixed sync frequencies

HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

VertRefresh is in Hz unless units are specified.

VertRefresh may be a comma separated list of discrete values, or a

comma separated list of ranges of values.

NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S

USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 70-80

EndSection

**********************************************************************

Graphics device section

**********************************************************************

Any number of graphics device sections may be present

Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

The chipset line is optional in most cases. It can be used to override

the driver's chipset detection, and should not normally be specified.

Chipset "generic"

The Driver line must be present. When using run-time loadable driver

modules, this line instructs the server to load the specified driver

module. Even when not using loadable driver modules, this line

indicates which driver should interpret the information in this section.

Driver     "nvidia"

The BusID line is used to specify which of possibly multiple devices

this section is intended for. When this line isn't present, a device

section can only match up with the primary video device. For PCI

devices a line like the following could be used. This line should not

normally be included unless there is more than one video device

intalled.

BusID "PCI:0:10:0"

VideoRam 256

Clocks 25.2 28.3

EndSection

Device configured by xorgconfig:

Section "Device"
Identifier "My Video Card"
Driver "nvidia"
Option "DPMS" "on"
Option "NvAGP" "1"
Option "RenderAccel" "on"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "True"
# unsupported card
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection

**********************************************************************

Screen sections

**********************************************************************

Any number of screen sections may be present. Each describes

the configuration of a single screen. A single specific screen section

may be specified from the X server command line with the "-screen"

option.

Section "Screen"
Identifier "Screen 1"
Device "My Video Card"
Monitor "My Monitor"
DefaultDepth 24

Subsection "Display"
    Depth       8
    Modes       "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort    0 0
EndSubsection
Subsection "Display"
    Depth       16
    Modes       "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort    0 0
EndSubsection
Subsection "Display"
    Depth       24
    Modes       "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort    0 0
EndSubsection

EndSection

**********************************************************************

ServerLayout sections.

**********************************************************************

Any number of ServerLayout sections may be present. Each describes

the way multiple screens are organised. A specific ServerLayout

section may be specified from the X server command line with the

"-layout" option. In the absence of this, the first section is used.

When now ServerLayout section is present, the first Screen section

is used alone.

Section "ServerLayout"

The Identifier line must be present

Identifier  "Simple Layout"

Each Screen line specifies a Screen section name, and optionally

the relative position of other screens. The four names after

primary screen name are the screens to the top, bottom, left and right

of the primary screen. In this example, screen 2 is located to the

right of screen 1.

Screen "Screen 1"

Each InputDevice line specifies an InputDevice section name and

optionally some options to specify the way the device is to be

used. Those options include "CorePointer", "CoreKeyboard" and

"SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"

Mode 0666

EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection</pre> <br /><br /><br />Un Saludo!