• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Script para instalar drivers de nvidia y beryl

    Programado Fijo Cerrado Movido
    Sistemas operativos
    8
    22
    2.6k
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • YorusY
      Yorus Veteranos HL @kelven
      Última edición por

      Con Vista en el mercado no se yo si alguien se va a molestar en hacer algo similar a Beryl en XP.

      Mi centro de operaciones
      Mi blog en HL

      hlbm signature

      1 Respuesta Última respuesta Responder Citar 0
      • psgonzaP
        psgonza @kelven
        Última edición por

        @kelven:

        Hombre estoy deacuerdo de que Beryl es alucinante .. pero tambien hay un monton de programas para hacer moding a windows y dejarlo genial (ahora solo falta que saquen algo parecido al beryl para XP .. seguro q no tardan mucho ) …

        Cambiar el marco a las ventanas es lo de menos…. ver como "arde" (literal) una ventana al cerrarla no lo he visto nunca xD

        kelvenK 1 Respuesta Última respuesta Responder Citar 0
        • kelvenK
          kelven @psgonza
          Última edición por

          arder la ventana .. madre mia … eso el mio no lo hace .. tengo q instalar las nuevas versiones ... ;D

          GunfettG 1 Respuesta Última respuesta Responder Citar 0
          • GunfettG
            Gunfett @kelven
            Última edición por

            Hola antes que nada felicitarte por el scrip que te has currado que nos ahorra muchos pasos 😉

            Bueno instale el scrip con Kubuntu edgy y tengo beryl, pero lo que no se si tengo es la targeta bien configurada. es una nvidia 6800gt y en el panel de control de KDE pone "Nvidia gforce generic" "controlador nv"

            Las fotos y los videos se ven mal, como si me faltaran bits de color y no me deja poner el monitor a mas de 56Hz cuando en windows lo tengo a 70.
            Tambien tengo que decir que los efectos de beryl me van bien, con el benchmark que lleva me da 1400 frames en reposo y 230 al rotar el cubo

            A ver si me podeis hechar una mano que hace mucho que no me ponia con linux y no me atrevo a tocar el xorg.conf

            ZenPiPerSZ 1 Respuesta Última respuesta Responder Citar 0
            • ZenPiPerSZ
              ZenPiPerS @Gunfett
              Última edición por

              Gunfett posteanos tu xorg.conf para echarle un vistazo, y también sería interesante que nos postearas la salida de cat /proc/driver/nvidia/agp/status y cat /proc/driver/nvidia/cards/*

              Las fotos y los videos se ven mal, como si me faltaran bits de color y no me deja poner el monitor a mas de 56Hz

              Quizá te falte especificar en el kernel la profundidad

              VESA driver type (vesafb-tng)  --->(1024x768-32@60) VESA default mode  
              

              Un Saludo!

              GunfettG 1 Respuesta Última respuesta Responder Citar 0
              • GunfettG
                Gunfett @ZenPiPerS
                Última edición por

                @X24400:~$ cat /proc/driver/nvidia/cards/*
                Model: GeForce 6800 GT
                IRQ: 74
                Video BIOS: 05.40.02.36.08
                Card Type: PCI-E
                DMA Size: 32 bits
                DMA Mask: 0xffffffff

                cat /proc/driver/nvidia/agp/status
                Nada supongo que porque la grafica es pcx, he provado con pcx pci-express y nada

                Y bueno la frq del monitor ya la tengo a 75 HZ que me he encontrado el mi monitor dentro del panel de control de KDE.
                Aqui dejo el xor.conf

                /etc/X11/xorg.conf (xorg X Window System server configuration file)

                This file was generated by dexconf, the Debian X Configuration tool, using

                values from the debconf database.

                Edit this file with caution, and see the /etc/X11/xorg.conf manual page.

                (Type "man /etc/X11/xorg.conf" at the shell prompt.)

                This file is automatically updated on xserver-xorg package upgrades only

                if it has not been modified since the last upgrade of the xserver-xorg

                package.

                If you have edited this file but would like it to be automatically updated

                again, run the following command:

                sudo dpkg-reconfigure -phigh xserver-xorg

                Section "Files"
                FontPath "/usr/share/X11/fonts/misc"
                FontPath "/usr/share/X11/fonts/cyrillic"
                FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
                FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
                FontPath "/usr/share/X11/fonts/Type1"
                FontPath "/usr/share/X11/fonts/100dpi"
                FontPath "/usr/share/X11/fonts/75dpi"
                FontPath "/usr/share/fonts/X11/misc"

                path to defoma fonts

                FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
                EndSection

                Section "Module"
                Load "bitmap"
                Load "ddc"
                Load "extmod"
                Load "freetype"
                Load "int10"
                Load "type1"
                Load "vbe"
                load "glx"
                load "GLcore"
                load "v4l"
                EndSection

                Section "InputDevice"
                Identifier "Generic Keyboard"
                Driver "kbd"
                option "CoreKeyboard"
                option "XkbRules" "xorg"
                option "XkbModel" "pc105"
                option "XkbLayout" "es"
                option "XkbOptions" "lv3:ralt_switch"
                EndSection

                Section "InputDevice"
                Identifier "Configured Mouse"
                Driver "mouse"
                option "CorePointer"
                option "Device" "/dev/input/mice"
                option "Protocol" "ExplorerPS/2"
                option "ZAxisMapping" "4 5"
                option "Emulate3Buttons" "true"
                EndSection

                Section "InputDevice"
                Driver "wacom"
                Identifier "stylus"
                option "Device" "/dev/wacom"# Change to
                option "Type" "stylus"
                option "ForceDevice" "ISDV4"# Tablet PC ONLY

                /dev/input/event

                for USB

                EndSection

                Section "InputDevice"
                Driver "wacom"
                Identifier "eraser"
                option "Device" "/dev/wacom"# Change to
                option "Type" "eraser"
                option "ForceDevice" "ISDV4"# Tablet PC ONLY

                /dev/input/event

                for USB

                EndSection

                Section "InputDevice"
                Driver "wacom"
                Identifier "cursor"
                option "Device" "/dev/wacom"# Change to
                option "Type" "cursor"
                option "ForceDevice" "ISDV4"# Tablet PC ONLY

                /dev/input/event

                for USB

                EndSection

                Section "Device"
                identifier "Tarjeta de v�o gen�ca"
                boardname "NVIDIA GeForce FX (generic)"
                busid "PCI:1:0:0"
                driver "nv"
                screen 0
                vendorname "NVIDIA"
                EndSection

                Section "Monitor"
                identifier "Generic Monitor"
                vendorname "Samsung"
                modelname "Samsung SyncMaster 710Tplus/711T/712T (Digital)"
                HorizSync 30-81
                VertRefresh 56-75
                modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
                modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
                modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
                modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
                modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
                modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
                modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
                modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
                modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
                modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
                modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
                modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
                modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
                modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
                modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
                modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
                modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
                modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
                modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
                gamma 1.0
                EndSection

                Section "Screen"
                Identifier "Default Screen"
                Device "Tarjeta de v�o gen�ca"
                Monitor "Generic Monitor"
                DefaultDepth 24
                SubSection "Display"
                depth 24
                modes "1280x1024@60" "1280x960@75" "1280x960@60" "1400x1050@60" "1280x1024@75" "1600x1200@65" "1152x864@75" "1600x1200@60" "1024x768@60" "1024x768@70" "1024x768@75" "832x624@75" "800x600@60" "800x600@75" "800x600@72" "800x600@56" "640x480@75" "640x480@72" "640x480@60"
                EndSubSection
                EndSection

                Section "ServerLayout"
                Identifier "Default Layout"
                screen 0 "Default Screen" 0 0
                InputDevice "Generic Keyboard"
                InputDevice "Configured Mouse"
                InputDevice "stylus" "SendCoreEvents"
                InputDevice "cursor" "SendCoreEvents"
                InputDevice "eraser" "SendCoreEvents"
                EndSection

                Section "DRI"
                Mode 0666
                EndSection
                Section "device" #
                identifier "device1"
                boardname "NVIDIA GeForce FX (generic)"
                busid "PCI:1:0:0"
                driver "nvidia"
                screen 1
                vendorname "NVIDIA"
                EndSection
                Section "screen" #
                identifier "screen1"
                device "device1"
                defaultdepth 24
                monitor "monitor1"
                EndSection
                Section "monitor" #
                identifier "monitor1"
                gamma 1.0
                EndSection
                Section "ServerFlags"
                EndSection

                ZenPiPerSZ 1 Respuesta Última respuesta Responder Citar 0
                • ZenPiPerSZ
                  ZenPiPerS @Gunfett
                  Última edición por

                  Lo del cat /proc/driver/nvidia/agp/status es para comprobar si tienes activado el Fast Writes y la velocidad a la que corre el agp, en tu caso pcie. Miralo en /proc/driver/nvidia o sinó directamente en la configuración del propio módulo nvidia, /etc/modules.d/nvidia que tengas descomentada una linea similar a esta:```
                  options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1

                  
                  Comprueba también que tengas activado en el kernel la profundiad y la velocidad de refresco.
                  

                  VESA driver type (vesafb-tng) --->(1024x768-32@60) VESA default mode

                  
                  Que versión de xorg estás usando? 6.x? es que lo veo algo raro :S
                  
                  Mi xorg.conf 7.1:
                  
                  **Edit** debido a que el foro no adminte mas de 15000 letras posteo mi xorg en el siguiente post y sin el encabezado porque sinó tampoco cabe.
                  ZenPiPerSZ 1 Respuesta Última respuesta Responder Citar 0
                  • ZenPiPerSZ
                    ZenPiPerS @ZenPiPerS
                    Última edición por

                    <pre>
                    Section "Module"

                    This loads the DBE extension module.

                    Load        "dbe"   # Double buffer extension
                    

                    This loads the miscellaneous extensions module, and disables

                    initialisation of the XFree86-DGA extension within that module.

                    SubSection  "extmod"
                      Option    "omit xfree86-dga"   # don't initialise the DGA extension
                    EndSubSection
                    

                    This loads the font modules

                    Load        "type1"
                    

                    Load "speedo"

                    Load        "freetype"
                    

                    Load "xtt"

                    This loads the GLX module

                    Load       "glx"
                    

                    This loads the DRI module

                    Load "dri"

                    Load "v4l"
                    

                    EndSection

                    **********************************************************************

                    Files section. This allows default font and rgb paths to be set

                    **********************************************************************

                    Section "Files"

                    The location of the RGB database. Note, this is the name of the

                    file minus the extension (like ".txt" or ".db"). There is normally

                    no need to change the default.

                    Multiple FontPath entries are allowed (which are concatenated together),

                    as well as specifying multiple comma-separated entries in one FontPath

                    command (or a combination of both methods)

                    FontPath   "/usr/share/fonts/misc"
                    FontPath   "/usr/share/fonts/75dpi"
                    FontPath   "/usr/share/fonts/100dpi"
                    FontPath   "/usr/share/fonts/TTF"
                    FontPath   "/usr/share/fonts/Type1"
                    FontPath   "/usr/lib/X11/fonts/local/"
                    FontPath   "/usr/lib/X11/fonts/misc/"
                    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
                    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
                    FontPath   "/usr/lib/X11/fonts/Speedo/"
                    FontPath   "/usr/lib/X11/fonts/Type1/"
                    FontPath   "/usr/lib/X11/fonts/TrueType/"
                    FontPath   "/usr/lib/X11/fonts/freefont/"
                    FontPath   "/usr/lib/X11/fonts/75dpi/"
                    FontPath   "/usr/lib/X11/fonts/100dpi/"
                    

                    The module search path. The default path is shown here.

                    EndSection

                    **********************************************************************

                    Server flags section.

                    **********************************************************************

                    Section "ServerFlags"

                    Uncomment this to cause a core dump at the spot where a signal is

                    received. This may leave the console in an unusable state, but may

                    provide a better stack trace in the core dump to aid in debugging

                    Option "NoTrapSignals"

                    Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence

                    (where n is 1 through 12). This allows clients to receive these key

                    events.

                    Option "DontVTSwitch"

                    Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence

                    This allows clients to receive this key event.

                    Option "DontZap"

                    Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching

                    sequences. This allows clients to receive these key events.

                    Option "Dont Zoom"

                    Uncomment this to disable tuning with the xvidtune client. With

                    it the client can still run and fetch card and monitor attributes,

                    but it will not be allowed to change them. If it tries it will

                    receive a protocol error.

                    Option "DisableVidModeExtension"

                    Uncomment this to enable the use of a non-local xvidtune client.

                    Option "AllowNonLocalXvidtune"

                    Uncomment this to disable dynamically modifying the input device

                    (mouse and keyboard) settings.

                    Option "DisableModInDev"

                    Uncomment this to enable the use of a non-local client to

                    change the keyboard or mouse settings (currently only xset).

                    Option "AllowNonLocalModInDev"

                    EndSection

                    **********************************************************************

                    Input devices

                    **********************************************************************

                    **********************************************************************

                    Core keyboard's InputDevice section

                    **********************************************************************

                    Section "InputDevice"

                    Identifier  "Keyboard1"
                    Driver      "kbd"
                    

                    For most OSs the protocol can be omitted (it defaults to "Standard").

                    When using XQUEUE (only for SVR3 and SVR4, but not Solaris),

                    uncomment the following line.

                    Option "Protocol" "Xqueue"

                    Option "AutoRepeat" "500 30"
                    

                    Specify which keyboard LEDs can be user-controlled (eg, with xset(1))

                    Option "Xleds" "1 2 3"

                    Option "LeftAlt" "Meta"

                    Option "RightAlt" "ModeShift"

                    To customise the XKB settings to suit your keyboard, modify the

                    lines below (which are the defaults). For example, for a non-U.S.

                    keyboard, you will probably want to use:

                    Option "XkbModel" "pc105"

                    If you have a US Microsoft Natural keyboard, you can use:

                    Option "XkbModel" "microsoft"

                    Then to change the language, change the Layout setting.

                    For example, a german layout can be obtained with:

                    Option "XkbLayout" "de"

                    or:

                    Option "XkbLayout" "de"

                    Option "XkbVariant" "nodeadkeys"

                    If you'd like to switch the positions of your capslock and

                    control keys, use:

                    Option "XkbOptions" "ctrl:swapcaps"

                    These are the default XKB settings for Xorg

                    Option "XkbRules" "xorg"

                    Option "XkbModel" "pc105"

                    Option "XkbLayout" "es"

                    Option "XkbVariant" ""

                    Option "XkbOptions" ""

                    Option "XkbDisable"

                    Option "XkbRules"   "xorg"
                    Option "XkbModel"   "pc105"
                    Option "XkbLayout"  "es"
                    Option "XkbVariant" "es"
                    

                    EndSection

                    **********************************************************************

                    Core Pointer's InputDevice section

                    **********************************************************************

                    Section "InputDevice"

                    Identifier and driver

                    Identifier  "Mouse1"
                    Driver      "mouse"
                    Option "Protocol"    "IMPS/2"       # IntelliMouse PS/2
                    Option "Device"      "/dev/input/mice"
                    

                    When using XQUEUE, comment out the above two lines, and uncomment

                    the following line.

                    Option "Protocol" "Xqueue"

                    Mouse-speed setting for PS/2 mouse.

                    Option "Resolution" "256"

                    Baudrate and SampleRate are only for some Logitech mice. In

                    almost every case these lines should be omitted.

                    Option "BaudRate" "9600"

                    Option "SampleRate" "150"

                    Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,

                    horizontal wheel to buttons 6 & 7. Change if your mouse has more than

                    3 buttons and you need to map the wheel to different button ids to avoid

                    conflicts.

                    Option "ZAxisMapping"   "4 5 6 7"
                    

                    Emulate3Buttons is an option for 2-button mice

                    Emulate3Timeout is the timeout in milliseconds (default is 50ms)

                    Option "Emulate3Buttons"
                    

                    Option "Emulate3Timeout" "50"

                    ChordMiddle is an option for some 3-button Logitech mice

                    Option "ChordMiddle"

                    EndSection

                    **********************************************************************

                    Other input device sections

                    this is optional and is required only if you

                    are using extended input devices. This is for example only. Refer

                    to the xorg.conf man page for a description of the options.

                    **********************************************************************

                    Section "InputDevice"

                    Identifier "Mouse2"

                    Driver "mouse"

                    Option "Protocol" "MouseMan"

                    Option "Device" "/dev/mouse2"

                    EndSection

                    Section "InputDevice"

                    Identifier "spaceball"

                    Driver "magellan"

                    Option "Device" "/dev/cua0"

                    EndSection

                    Section "InputDevice"

                    Identifier "spaceball2"

                    Driver "spaceorb"

                    Option "Device" "/dev/cua0"

                    EndSection

                    Section "InputDevice"

                    Identifier "touchscreen0"

                    Driver "microtouch"

                    Option "Device" "/dev/ttyS0"

                    Option "MinX" "1412"

                    Option "MaxX" "15184"

                    Option "MinY" "15372"

                    Option "MaxY" "1230"

                    Option "ScreenNumber" "0"

                    Option "ReportingMode" "Scaled"

                    Option "ButtonNumber" "1"

                    Option "SendCoreEvents"

                    EndSection

                    Section "InputDevice"

                    Identifier "touchscreen1"

                    Driver "elo2300"

                    Option "Device" "/dev/ttyS0"

                    Option "MinX" "231"

                    Option "MaxX" "3868"

                    Option "MinY" "3858"

                    Option "MaxY" "272"

                    Option "ScreenNumber" "0"

                    Option "ReportingMode" "Scaled"

                    Option "ButtonThreshold" "17"

                    Option "ButtonNumber" "1"

                    Option "SendCoreEvents"

                    EndSection

                    **********************************************************************

                    Monitor section

                    **********************************************************************

                    Any number of monitor sections may be present

                    Section "Monitor"

                    Identifier  "My Monitor"
                    

                    HorizSync is in kHz unless units are specified.

                    HorizSync may be a comma separated list of discrete values, or a

                    comma separated list of ranges of values.

                    NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S

                    USER MANUAL FOR THE CORRECT NUMBERS.

                    HorizSync   30-83
                    

                    HorizSync 30-64 # multisync

                    HorizSync 31.5, 35.2 # multiple fixed sync frequencies

                    HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

                    VertRefresh is in Hz unless units are specified.

                    VertRefresh may be a comma separated list of discrete values, or a

                    comma separated list of ranges of values.

                    NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S

                    USER MANUAL FOR THE CORRECT NUMBERS.

                    VertRefresh 70-80
                    

                    EndSection

                    **********************************************************************

                    Graphics device section

                    **********************************************************************

                    Any number of graphics device sections may be present

                    Standard VGA Device:

                    Section "Device"
                    Identifier "Standard VGA"
                    VendorName "Unknown"
                    BoardName "Unknown"

                    The chipset line is optional in most cases. It can be used to override

                    the driver's chipset detection, and should not normally be specified.

                    Chipset "generic"

                    The Driver line must be present. When using run-time loadable driver

                    modules, this line instructs the server to load the specified driver

                    module. Even when not using loadable driver modules, this line

                    indicates which driver should interpret the information in this section.

                    Driver     "nvidia"
                    

                    The BusID line is used to specify which of possibly multiple devices

                    this section is intended for. When this line isn't present, a device

                    section can only match up with the primary video device. For PCI

                    devices a line like the following could be used. This line should not

                    normally be included unless there is more than one video device

                    intalled.

                    BusID "PCI:0:10:0"

                    VideoRam 256

                    Clocks 25.2 28.3

                    EndSection

                    Device configured by xorgconfig:

                    Section "Device"
                    Identifier "My Video Card"
                    Driver "nvidia"
                    Option "DPMS" "on"
                    Option "NvAGP" "1"
                    Option "RenderAccel" "on"
                    Option "AllowGLXWithComposite" "true"
                    Option "AddARGBGLXVisuals" "True"
                    # unsupported card
                    #VideoRam 131072
                    # Insert Clocks lines here if appropriate
                    EndSection

                    **********************************************************************

                    Screen sections

                    **********************************************************************

                    Any number of screen sections may be present. Each describes

                    the configuration of a single screen. A single specific screen section

                    may be specified from the X server command line with the "-screen"

                    option.

                    Section "Screen"
                    Identifier "Screen 1"
                    Device "My Video Card"
                    Monitor "My Monitor"
                    DefaultDepth 24

                    Subsection "Display"
                        Depth       8
                        Modes       "1280x1024" "1024x768" "800x600" "640x480"
                        ViewPort    0 0
                    EndSubsection
                    Subsection "Display"
                        Depth       16
                        Modes       "1280x1024" "1024x768" "800x600" "640x480"
                        ViewPort    0 0
                    EndSubsection
                    Subsection "Display"
                        Depth       24
                        Modes       "1280x1024" "1024x768" "800x600" "640x480"
                        ViewPort    0 0
                    EndSubsection
                    

                    EndSection

                    **********************************************************************

                    ServerLayout sections.

                    **********************************************************************

                    Any number of ServerLayout sections may be present. Each describes

                    the way multiple screens are organised. A specific ServerLayout

                    section may be specified from the X server command line with the

                    "-layout" option. In the absence of this, the first section is used.

                    When now ServerLayout section is present, the first Screen section

                    is used alone.

                    Section "ServerLayout"

                    The Identifier line must be present

                    Identifier  "Simple Layout"
                    

                    Each Screen line specifies a Screen section name, and optionally

                    the relative position of other screens. The four names after

                    primary screen name are the screens to the top, bottom, left and right

                    of the primary screen. In this example, screen 2 is located to the

                    right of screen 1.

                    Screen "Screen 1"
                    

                    Each InputDevice line specifies an InputDevice section name and

                    optionally some options to specify the way the device is to be

                    used. Those options include "CorePointer", "CoreKeyboard" and

                    "SendCoreEvents".

                    InputDevice "Mouse1" "CorePointer"
                    InputDevice "Keyboard1" "CoreKeyboard"
                    

                    EndSection

                    Section "DRI"

                    Mode 0666

                    EndSection

                    Section "Extensions"
                    Option "Composite" "Enable"
                    EndSection</pre> <br /><br /><br />Un Saludo!

                    GunfettG 1 Respuesta Última respuesta Responder Citar 0
                    • GunfettG
                      Gunfett @ZenPiPerS
                      Última edición por

                      gracias ZenPiPerS he dejado la seccion Module, Screec y device parecidas a la tuya pero adaptadas a mi monitor y ya va mucho mejor.

                      Ahora a esperar a que salga ubuntu 7.04

                      whoololonW 1 Respuesta Última respuesta Responder Citar 0
                      • whoololonW
                        whoololon Veteranos HL @Gunfett
                        Última edición por

                        Joer, ha sido meterme al Linux y venirme todo de golpe.
                        A ver si es verdad que a Ubuntu le solucionan los problemas de los controladores 3D (sobre todo para ATI), porque he visto lo que hace beryl… y casi me viene la regla. ;D

                        PD: Te debemos una ronda por el curro del script. :sisi:

                        ...me lo dicen las voces...

                        hlbm signature

                        1 Respuesta Última respuesta Responder Citar 0
                        • 1
                        • 2
                        • 2 / 2
                        • First post
                          Last post

                        Foreros conectados [Conectados hoy]

                        4 usuarios activos (0 miembros e 4 invitados).
                        febesin, pAtO,

                        Estadísticas de Hardlimit

                        Los hardlimitianos han creado un total de 543.3k posts en 62.8k hilos.
                        Somos un total de 34.7k miembros registrados.
                        sridharpat ha sido nuestro último fichaje.