Test of the Real Nvidia Gtx Titan, single-sli-tri Sli, 4 WAY SLI
-
Here it is, original evga hydrocooper: -
How fast you are… you certainly won't have a power supply problem, I remember having that heat extractor a few years ago with the G80s and it gave me very good results, it had a very bad case and just putting the 8800 it got to 80º without playing, I did that fix with the extractors and I managed to lower the temperature to 62º.
Curiously, as hot as that card is, it still works and I was pushing a pretty significant OC, but I haven't needed to put it in the oven or anything, it's going well although it's already quite short, my sister has it, but they only play Angry Birds, they don't need more.
Well, my 780 has failed for the first time, the OC has failed, I was running Valley at 1293 and 450 memory and it was spitting out quite a few frames but suddenly the screen went black and continued but at the factory frequency, the first time I've seen such a failure, normally the driver would fail but you can tell either it has low voltage or it exceeds 105% of the power target.
regards
After doing the tests, the fan slot cooler attached to the Titan lowers it by 2ºC, I'm not sure if I should leave it a slot of space, the failure is probably the power target in some cases it reaches 128, I have it at 130º and 89º of GPU.
Well not fast, I've been turning the tower over for over a year and the power supply for 6 months but they are purchases that will last for a long time.
regards.
-
I've done the tests and the fan slot cooler attached to the Titan is 2ºC cooler. I'm not sure if I should leave a slot of space. The failure is probably the power target. In some cases it reaches 128. I have it set to 130º and 89º GPU.
Well, it's not quick, I've been messing around with the tower for over a year and the power supply for 6 months, but these are purchases that will last for a long time.
Regards.
I already imagined it must be the power target. It's a shame because it looked stable without artifacts or stuttering, although I passed half the test at factory frequency and it gave me the best score.
I can't see the BIOS for my card. They've put the WF3 but it's different from mine and also the WF that has issues with the voltage. Let's see if they put the one from the WF rv2. If I can put a little more voltage and raise the power target, this card will overclock well. I'm getting more and more frustrated with this boost, because in the end it limits you.
Although for those who don't OC it's good because it automatically sets to 1124mhz and it's an extra in performance. If the game doesn't require much load, it lowers the frequency and voltage to maintain stable 60 fps.
regards
-
Testing the cyclo slot fan went from 87ºC and 95% fan to 84ºC and 90% an improvement not substantial but it's an improvement after all
When changing the pass tower to 78ºC and 81% adding a 120mm cooler on the bottom I will test trying to add a 140mm attached to the rigid ones.
Ambient temperature 25ºC, in this case the cyclo slot fan fails to improve the temperature.
Well we are already ready to test the GTX 580 for physx, leaving one PCI at 8X but the 2 graphics cards would be stuck or a PCI at 4X leaving distance between both.
You will notice in the performance the 8X against the 4X
? -
Testing the cyclo slot fan went from 87ºC and 95% fan to 84ºC and 90% an improvement not substantial but it's an improvement
When I changed the tower it went to 78ºC and 81% adding a 120mm cooler on the bottom I will try adding a 140mm attached to the rigid ones.
Ambient temperature 25ºC, in this case the cyclo slot fan doesn't manage to improve the temperature.
Well we are ready to test the GTX 580 for physx, leaving one PCI at 8X but the 2 graphics cards would be stuck or a PCI at 4X leaving distance between both.
You will notice the performance difference between 8X and 4X
?The thing is that if you put the physics one at 8x and the main one also at 8x I would prefer the Titan at 16x and the 580 at 4x, I don't think there's much difference between 4x and 8x in a card for physics, and if with 4x you have more space between them then it's better.
regards
-
The thing is, if you set the physics one to 8x and the main one stays at 8x as well, I'd at least prefer the Titan at 16x and the 580 at 4x, I don't think there's much difference between 4x and 8x on a card for physics, and if with 4x it's more separated then even better.
regards
I hadn't gone into that detail in SLI configuration if I knew they stayed at 8X/8X but I didn't know that the same thing happened with different graphics.
Well then, let's try it on the 4x pci.
Thanks.
-
I hadn't gone into that detail about SLI settings. I knew they stayed at 8X/8X, but I didn't know the same thing happened with different graphics cards.
Well, then I'll try it on the 4x PCI slot.
Thanks.
That has nothing to do with SLI or CF. If you plug in two cards, it goes to 8x8. If it were an x58, x79, then they would go to 16 or 16x8x8. That's the limitation Intel puts on those chipsets. If you don't have a PLX, it would limit you even with a sound card, I mean if you connect it to a PCIe x16.
It's about time Intel gave those chipsets a 16x16, but they don't feel like it because they have no competition.
Intel does whatever it wants. If they put a 16x16 on the Z87, they wouldn't sell a single x79, or they would sell very few, since both Z77 and Z87 are better, I'm talking about gaming performance. Even though a Z87 would allow an 8x8x8x8, it would still have a clear advantage in a 4way SLI of 780, because in addition to PCIe3, it would have a better PCIe controller, it's like the memory controller that improves with each new CPU series and frequencies, it will be similar.
With Z77 I'm referring to Ivy, that is 3xx0K, and Z87 to 4xx0K.
regards
-
Hello ELP3…
I just got myself a couple of 290x cards and I can unlock voltage..
Put your best bench with the titans in sli there, I'm going to run over you...
I'll look back at you in the rearview mirror, hehe...
-
Hello ELP3…
I just got a couple of 290x bichas and I can unlock voltage..
Put your best bench there with the titans in sli, I'm going to go over you...
I'll see you in the rearview mirror, hehe...
Well you already have courage..
Good luck. I think you're going to need it hehe
Look for the post of the 780Ti I think my results are there..they can always be improved. For example the 3DMark we know runs much better on Win 8, but I'm not installing that OS on my computer for now..it gives me the creeps..hehe
However, more than against me, since I'm ahead with overvolting, I think it would be fairer for you to compare with ConanR since he's on the same conditions. Unless you've messed it up..and don't remove tessellation eh? we don't know everything here…hehe
A hug..and good luck..;)
-
Well, you already have courage..
Good luck. I think you'll need it hehe
Look for the post about the 780Ti, I think my results are there..they can always be improved. For example, we all know that 3DMark runs much better on Win 8, but I haven't installed that OS on my computer yet..it gives me the creeps..hehe
However, rather than against me, since I have an overclocking advantage, I think it would be fairer for you to compare with ConanR since he's on the same conditions. Unless you've messed it up..and don't remove tessellation eh? we don't know everything here…hehe
Take care..and good luck..;)
Elpe..
I'm serious. Put your best bench in sli, I'll beat it for sure... It's not a joke... I have a 290 terminator... They wipe out everything, even your vitaminized titan sli...
-
Elpe..
I'm serious. Give me your best bench in sli, I'll beat you for sure... It's not a joke... I have some 290 terminator... They finish everything, even your sli of vitaminized titans...
Well take it... I had fun with this, it's Xtreme, not perfomace..and don't remove tessellation, huh?
Best regards.
P.D.290X terminator? hehe..what a name..
-
Bueno toma..entretente con esto,es Xtreme,no perfomace..y no quites teselación,eh?
Un saludo.
P.D.290X termintor? jeje..que nombre..
Muchas gracias, compi. Mañana paso el test que ahora me llama la mujer a cama…
Te vas a sorprender mañana, jejeje.... Son unas 290x especiales...
-
Many thanks, mate. Tomorrow I'll pass the test, now my wife is calling me to bed...
You'll be surprised tomorrow, hehe.... They are some special 290x...
I don't know if you're kidding me or what..but seriously.
There's no CF 290X that even comes close to that...there's nothing special, unless they're with LN2, without tessellation or I know what..but if they're just 2 290X with voltage they don't even smell like the 780Ti or the TITAN except for a couple of things.
A 290X stays at almost 35-40% of the performance of a TITAN that's so high in the 3D Mark 11 xtreme.
Miracles in Lourdes...and when gaming don't even get me started. The CF 290X performs terribly......which is, after all, what we want from graphics cards.
Best regards.
-
I don't know if you're kidding me or what..but seriously.
There's no CF 290X that even comes close to that..there's nothing special about it, unless they're using LN2, without tessellation or I know what..But if they're just 2 290X with voltage, they don't even smell like the 780Ti or the TITAN except for a couple of things.
A 290X stays at almost 35-40% of the performance of a TITAN that's overclocked in the 3D Mark 11 xtreme.
Miracles in Lourdes…and when gaming, don't even get me started. The CF 290X is a total disaster......which is ultimately what we want from graphics cards.
Best regards.
You'll see the hardmod I have here, shipped from the USA...
You'll have a laugh when the test is done. I'll see if I can find some time today to work on them...
Hugs..
EDIT:
Well, I already have a result to show:
Keep pushing 1.50v to your Titans, maybe I'll see something in the distance...
If you don't give them more juice, I recommend you compete with Conan, you'll have a hard time with me, hehe...
Hugs...
-
You're going to see the hardmod I have here, sent from USA…
You're going to laugh when it passes the test. Let's see if I can find some time today to get started on them...
A hug..
EDITO:
Well, I already have a result to show:
Go ahead and put 1.50v into your Titans, let's see if I can see something in the distance…
If you don't give it more juice, I recommend you compete with Conan, because with me you're in trouble, hehe...
A hug...
Tremendous result, are they underwater? what temperatures do they reach?
Regards.-
-
You're going to see the hardmod I have here, sent from USA…
You'll laugh when it passes the test. Let's see if I can find some time today to get started on them...
Hugs..
EDIT:
Well, I already have a result to show:
Go ahead and put 1.50v on your Titans, let's see if I can see something in the distance…
If you don't give it more juice, I recommend you compete with Conan, because with me you're cooked, hehe...
Hugs...
If you don't say the trick, I don't see the fun in it..
The 290X are absolutely disastrous in 3D Marl 11 X. Anyone who has had them knows that.
Even if you overclocked them to 1500MHZ each, it wouldn't give that result…
So well, neither voltmod, nor USA nor anything...
This is the result of the first guy with AMD officially in the HOF of the 3D Mark 11 with 3 290X:
http://www.3dmark.com/3dm11/7582141
He scores less than me with 2 TITANs, and much less than you with 2… it's strange, no?...;D
Do you explain this little trick?
Hugs.
-
If you don't say the trick, I don't see the fun in it..
The 290X are absolutely disastrous in 3D Marl 11 X. Anyone who has had them knows this.
Even if you overclock them to 1500MHZ each, it wouldn't give that result…
So well, no voltmod, no USA, nothing...
So you explain this little trick?
A hug.
There's no trick. It's a hardmod, a soldered board with more vrm's… I'm serious...
In fact, given the result, I just sent a message to the modder to get me another two and unseat Kingpin from number one...
Elp, don't you get more titans if you overclock them to 1.50???
Another hug..
-
There's no trick. It's a hardmod, a soldered board with more vrm's… I'm serious...
In fact, seeing the result, I just sent a message to the modder to get me another two and dethrone Kingpin from number one...
Elp, don't they give you more titans if you raise them to 1.50???
Another hug..
Show them…and GPU-Z screenshots to see the frequency.
A hug.
-
Show them…and GPU-Z screenshots to see the frequency.
A hug.
Photos not yet (I want to have the scoop on 4)… But the frequency is a beast...
-
Photos not yet (I want to have the scoop on 4)… But the frequency is a bestiality...
Sorry, but you're pulling the leg of someone else…;)
A hug and go entertain yourself with something else..
